1.Shandong Shuanglun Co. Ltd., Weihai, Shandong 520000, China; 2.National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China
[1]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2011.[2]GUELICH J F.Centrifugal pumps[M]. Berlin: Sprin-ger,2008.[3]杨敏,闵思明,王福军. 双蜗壳泵压力脉动特性及叶轮径向力数值模拟[J]. 农业机械学报,2009,40(11):83-88. YANG Min,MIN Siming, WANG Fujun. Numerical simulation of pressure fluctuation and radial force in a double volute pump[J]. Transactions of the CSAM, 2009, 40(11): 83-88.(in Chinese)[4]王洋,吕忠斌,曹璞钰,等. 双吸泵吸入室挡板的数值模拟和正交试验[J]. 江苏大学学报(自然科学版),2014,35(5):525-530. WANG Yang,LYU Zhongbin,CAO Puyu, et al. Numerical simulation and orthogonal test of baffle in suction chamber of double suction pump[J]. Journal of Jiangsu University(natural science edition), 2014,35(5):525-530.(in Chinese)[5]BRRIO R,PARRONDO J,BLANCO E.Numerical analysis of the unsteady flow in the near-tongue region in a volute-type centrifugal pump for different operation points[J]. Computers & fluids,2010,39(5): 859-870.[6]GONZLEZ J,PARRONDO J L,SANTOLARI A C,et al.Steady and unsteady radial forces for a centrifugal pump with impeller to tongue gap variation [J].Journal of flui-ds engineering, 2006,128(3): 454-462.[7]GONZLEZ J, FEMNDEZ J, BLANCO E,et al. Numerical simulation of the dynamic effects due to impeller-volute interaction in a centrifugal pump[J].Journal of fluids engineering,2002,124(2): 348-355.[8]陆国成,左志刚,刘树红,等.压水室形状对某离心泵径向力影响的数值模拟[J]. 工程热物理学报,2015,36(4):770-774. LU Guocheng,ZUO Zhigang,LIU Shuhong,et al. Numerical analysis of the influence of casing′s shape on radial force of a centrifugal pump[J].Journal of engineering thermophysics, 2015,36(4):770-774.(in Chinese)[9]祝磊,袁寿其,袁建平. 阶梯隔舌对离心泵压力脉动和径向力影响的数值模拟[J].农业机械学报,2010,41(S1):21-26. ZHU Lei,YUAN Shouqi,YUAN Jianping. Numerical simulation on pressure fluctuations and radial hydraulic forces in centrifugal pump with step tongue[J].Transactions of the CSAM,2010,41(S1):21-26.(in Chinese)[10]袁寿其,周建佳,袁建平,等.分流叶片对螺旋离心泵径向力的影响[J]. 农业机械学报,2012,43(3):37-42. YUAN Shouqi,ZHOU Jianjia,YUAN Jianping,et al.Numerical simulation on radial hydraulic forces for screw-type centrifugal pump with splitter blade[J].Transactions of the CSAM,2012,43(3): 37-42.(in Chinese)[11]BEHRT, PORRECA L, MOKULYS T,et al. Multistage aspects and unsteady effects of stator and rotor clocking in an axial turbine with low aspect ratio blading [J]. Journal of turbomachinery,2006,128(1): 11-22.[12]SEGALA W,STEL H,HUNGRIA V,et al. Numerical simulation of the flow in a centrifugal pump with a vaned diffuser[C]//Proceedings of ASME/JSME/KSME Joint Fluids Engineering Conference. New York: American Society of Mechanical Engineers,2011: 1791-1800.[13]LONG Y,ZHU R,WANG D,et al. Numerical and experimental investigation on the diffuser optimization of a reactor coolant pump with orthogonal test approach[J]. Journal of mechanical science & technology,2016,30(11): 4941-4948.[14]张霞,袁寿其,张金凤,等. 不同叶片包角对螺旋形单蜗壳离心泵叶轮径向力特性的影响[J]. 流体机械, 2017, 45(1):43-47. ZHANG Xia, YUAN Shouqi, ZHANG Jinfeng, et al. Effect of different blade wrap angle on impeller radial force for a helical single spiral volute centrifugal pump[J].Fluid machinery,2017, 45(1):43-47.(in Chinese)