JIA Chengli1, YANG Congxin2, LAN Xiaogang3, CHENGXiaorui2, XU Biao2
1.School of Mechanical Engineering, Shanghai Institute of Technology, Shanghai 201418, China; 2.College of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China; 3.〓College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201418, China
[1]WU Dazhuan, HU Fangfang, WANG Leqin. Numerical simulation on the performance of a mixed-flow pump under various casing structures[J]. Advances in mechanical engineering, 2013,5: 952702.[2]KIM J Y, CHUNG K N, KIM Y K. A numerical study of pump characteristics of a concrete volute pump with various types of volutes[C]//Proceedings of the ASME-JSME-KSME 2011 Joint Fluids Engineering Confe-rence. [S.l.]:American Society of Mechanical Engineers, 2011: 283-288.[3]JI Chunjun, WANG Yang. The design and flow simulation of the volute casing of a mixed flow pump[C]//Proceedings of the 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, 2011: 820-823.[4]张栋俊. 泵壳对核主泵性能的影响[D]. 大连:大连理工大学, 2010.[5]陈颖, 李国平, 张宁,等. 蜗壳喉部面积对离心泵非定常特性的影响[J]. 流体机械, 2017, 45(2): 38-42. CHEN Ying, LI Guoping, ZHANG Ning, et al. Research on the influence of volute throat area on unsteady characteristics in a centrifugal pump[J]. Fluid machi-nery, 2017, 45(2): 38-42.(in Chinese)[6]薛梅新, 朴英. 加力燃油泵隔舌倒圆抑制分离的数值模拟[J]. 航空动力学报, 2012, 27(12): 2799-2804. XUE Meixin, PIAO Ying. Numerical simulation on sepa-ration control by filleting casing tongue of after-burning fuel pump[J]. Journal of aerospace power, 2012, 27(12): 2799-2804.(in Chinese)[7]祝磊, 袁寿其, 袁建平,等. 阶梯隔舌对离心泵压力脉动和径向力影响的数值模拟[J].农业机械学报, 2010,41(S1): 21-26. ZHU Lei, YUAN Shouqi, YUAN Jianping, et al. Numerical simulation on pressure fluctuations and radial hydraulic forces in centrifugal pump with step-tongue[J]. Transactions of the CSAM, 2010, 41(S1): 21-26.(in Chinese)[8]祝磊, 袁寿其, 袁建平,等. 不同型式隔舌离心泵动静干涉作用的数值模拟[J]. 农业工程学报, 2011, 27(10): 50-55. ZHU Lei, YUAN Shouqi, YUAN Jianping, et al. Numerical simulation for rotor-stator interaction of centri-fugal pump with different tongues[J]. Transactions of the CSAE, 2011, 27(10): 50-55.(in Chinese)[9]DONG R, CHU S, KATZ J. Effect of modification to tongue and impeller geometry on unsteady flow, pressure fluctuations, and noise in a centrifugal pump[J]. Journal of turbomachinery, 1997, 119(3): 506-515.[10]李红, 陆天桥, 詹连晨. 隔舌间隙对自吸离心泵自吸性能的影响[J]. 农业机械学报, 2017, 48(3): 141-147. LI Hong, LU Tianqiao, ZHAN Lianchen. Influence of gap between impeller and tongue on centrifugal pump self-priming performance [J]. Transactions of the CSAM, 2017, 48(3): 141-147.(in Chinese)[11]王鹏, 袁寿其, 王秀礼, 等. 蜗壳不同心度对核主泵瞬态水动力特性研究[J]. 振动与冲击, 2015, 34(22): 13-18. WANG Peng, YUAN Shouqi, WANG Xiuli, et al. Volute eccentricity effect on transient dynamic characteristics of nuclear main pump[J]. Journal of vibration and shock, 2015, 34(22): 13-18.(in Chinese)[12]GONZ(~overA)LEZ J, PARRONDO J, SANTOLARIA C, et al. Steady and unsteady radial forces for a centrifugal pump with impeller to tongue gap variation[J]. Journal of fluids engineering, 2006, 128(3): 454-462.[13]KNIERIM C, BAUMGARTEN S, FRITZ J, et al. Design process for an advanced reactor coolant pump for a 1 400 MW nuclear power plant[C]//Proceedings of the ASME 2005 Fluids Engineering Division Summer Mee-ting.[S.l]: American Society of Mechanical Engineers, 2005: 1363-1369.[14]杨从新, 贾程莉, 程效锐,等. 导叶周向布置位置对核主泵性能的影响[J]. 兰州理工大学学报, 2015, 41(5): 54-58. YANG Congxin, JIA Chengli, CHENG Xiaorui, et al. Influence of position of circumferentially disposed guide vane on performance of coolant pump of nuclear pump[J]. Journal of Lanzhou University of Technology, 2015, 41(5): 54-58.(in Chinese)[15]李靖, 王晓放, 周方明. 非均布导叶对核主泵模型泵性能及压力脉动的影响[J]. 流体机械,2014,42(9):19-24. LI Jing, WANG Xiaofang, ZHOU Fangming. Influence of uneven guide blade on performance and pressure fluctuation of nuclear model pump[J]. Fluid machinery,2014,42(9):19-24.(in Chinese)