Influence of outlet edge position of diffuser vane on performance of deep-well centrifugal pump
ZHOU Ling1, YANG Yang1, SHI Weidong1, LU Weigang1, YE Daoxing2
1.National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.Key Laboratory of Fluid and Power Machinery, Ministry of Education, Xihua University, Chengdu, Sichuan 610039, China
Abstract:In order to study the effect of the outlet edge position of the diffuser vane on the performance of deep-well centrifugal pump, by the numerical simulation and performance test, the 100QJ30 type deep-well centrifugal pump was taken as the experimental object. Under the condition that the main geometrical parameters of the diffuser vanes were not changed, three different diffusers were determined by adjusting the axial position of the blade outlet edge. And the axial distance between the blade exit edge and the guide vane field exit was 6, 3 and 1 mm. The numerical simulation of three schemes was carried out respectively by Ansys CFX software, and the computational domain was established based on the two-stage pump model, and multi-condition numerical simulation was carried out by the stan-dard k-ε turbulence model and standard wall function. The performance of the three schemes was predicted respectively, and the prediction results were compared and analyzed. The results show that the extension of the diffuser exit side can suppress the evolution and growth of the vortex core due to the flow separation and eliminate the vortex in the guide vane flow channel, and improve the flow field distribution of the liquid at the inlet of the secondary impeller. Compared to the first two schemes, the guide vane structure of the third scheme has greatly improved the rectifying capacity of the guide vane.
周岭, 杨阳, 施卫东, 陆伟刚, 叶道星. 导叶出口边位置对深井离心泵性能的影响[J]. 排灌机械工程学报, 2016, 34(12): 1028-1034.
ZHOU Ling, YANG Yang, SHI Weidong, LU Weigang, YE Daoxing. Influence of outlet edge position of diffuser vane on performance of deep-well centrifugal pump. Journal of Drainage and Irrigation Machinery Engin, 2016, 34(12): 1028-1034.
[1]王国涛,徐燕. 高速深井离心泵内部流场数值模拟与试验研究[J]. 流体机械, 2015,43(4):8-11. WANG Guotao, XU Yan. Numerical simulation and experimental study for internal flow field in high-speed deep-well centrifugal pump[J]. Fluid machinery, 2015,43(4):8-11.(in Chinese)[2]丛小青,周日,韩泳涛,等. 基于CFX正交试验的深井离心泵导叶的优化设计[J]. 流体机械, 2015,43(9):22-25. CONG Xiaoqing, ZHOU Ri, HAN Yongtao. Optimization design of deep-well centrifugal pump based on CFX orthogonal test[J]. Fluid machinery, 2015,43(9):22-25.(in Chinese)[3]周岭. 新型深井离心泵设计方法与试验研究[D]. 镇江:江苏大学, 2014:4-5.[4]施卫东, 王川, 司乔瑞,等. 级间间隙对新型井泵性能的影响[J]. 排灌机械工程学报, 2012, 30(6):627-631. SHI Weidong, WANG Chuan, SI Qiaorui, et al.Influence of inter-stage seal clearance on performance of new-type well pump[J].Journal of drainage and irrigation machinery engineering, 2012, 30(6):627-631.(in Chinese)[5]DAZIN A, CAVAZZINI G, PAVESI G, et al. High-speed stereoscopic PIV study of rotating instabilities in a radial vaneless diffuser[J]. Experiments in fluids, 2011, 51(1): 83-93.[6]施卫东, 张启华, 陆伟刚. 新型井泵水力设计及内部流动的数值模拟[J]. 江苏大学学报(自然科学版), 2006, 27(6): 528-531. SHI Weidong, ZHANG Qihua, LU Weigang. Hydraulic design of new-type deep well pump and its flow calculation[J]. Journal of Jiangsu University(natural science edition), 2006, 27(6):528-531.(in Chinese)[7]GÖLCÜ M, PANCAR Y, SEKMEN Y. Energy saving in a deep well pump with splitter blade[J]. Energy conversion & management, 2006, 47(5):638-651.[8]GOEL T, DORNEY D J, HAFTKA R T, et al. Improving the hydrodynamic performance of diffuser vanes via shape optimization[J]. Computers & fluids, 2008, 37(6):705-723.[9]杨敏官, 李辉, 高波,等. 离心泵内流场计算及空间导叶内流动分析[J]. 流体机械, 2008, 36(7):16-19. YANG Minguan, LI Hui, GAO Bo, et al. Numerical calculation of turbulent flow in a centrifugal pump and flow field analysis to vaned diffuser[J].Fluid machinery,2008,36(7):16-19.(in Chinese)[10]周岭, 施卫东, 陆伟刚,等. 深井离心泵数值模拟与试验[J]. 农业机械学报, 2011, 42(3):69-73. ZHOU Ling, SHI Weidong, LU Weigang, et al. Numerical simulation and experiment on deep-well centrifugal pump[J].Transactions of the CSAM,2011,42(3):69-73.(in Chinese)[11]LU W, ZHOU L, ZHANG D, et al. Unsteady flow numerical analysis of new-type deep well pump under multi-conditions[C]//Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Mee-ting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. New York: American Society of Mechanical Engineers, 2010:647-652.[12]陆伟刚, 张启华, 施卫东. 深井离心泵叶轮极大直径设计法[J]. 排灌机械工程学报, 2006, 24(5):1-7. LU Weigang, ZHANG Qihua, SHI Weidong. Impeller diameter maxmium approach for deep well pumps[J].Journal of drainage and irrigation machinery enginee-ring, 2006, 24(5):1-7.(in Chinese)[13]BELLANI G, BYRON M L, COLLIGNON A G, et al. Shape effects on turbulent modulation by large nearly neutrally buoyant particles[J]. Journal of fluid mecha-nics, 2012, 712: 41-60.