Abstract:Since the sodium-cooled fast reactor coolant pump is subject to problems associated with journal wear and leakage during its operation, a guide plain bearing with spiral grooves is proposed to improve hydrodynamic characteristics of the gap in the bearing. Based on numerical simulations of CFD, the advantages and disadvantages of the bearings with spiral grooves respectively in the bush and the spindle are compared in terms of their performance. It turns out that the bearing with spiral grooves in the spindle is more effective. Accordingly, the influence of spiral groove structural variables on fluid dynamic characteristics of the bearing gap is explored, and then a preliminary optimized bearing structure is put forward. The results show that the helix angle of spiral groove is a significant factor influencing the support force and deflection angle. Further, with increasing helix angle, the support force rises but the deflection angle decreases. The helix angle and the groove-to-dam width ratio are two factors significantly affecting the leakage. Specially, the leakage increases with increase of the helix angle and the ratio. The number of spiral grooves has no significant effect on the bearing performance. The bearing with 12 spiral grooves, 42? helix angle and 2.0 groove-to-dam width ratio has the best overall performance. These results have certain guiding significance for the hybrid-bearing structure design.
张凌峰,孙见君*,马晨波,张玉言. 一种钠冷快堆核主泵动静压导轴承间隙流体动力特性分析[J]. 排灌机械工程学报, 2019, 37(5): 427-434.
ZHANG Lingfeng, SUN Jianjun*, MA Chengbo, ZHANG Yuyan. Analysis of hydrodynamic characteristics of guide hybrid-bearings for sodium-cooled fast reactor coolant pumps. Journal of Drainage and Irrigation Machinery Engin, 2019, 37(5): 427-434.
[1]张晓东,杜云贵,郑永刚.核能及新能源发电技术[M].北京:中国电力出版社,2008.[2]何佳闰, 郭正荣. 钠冷快堆发展综述[J]. 东方电气评论, 2013, 27(3):36-43. HE Jiarun, GUO Zhengrong. A review on the develop-ment of sodium-cooled fast reactor[J]. Dongfang elec-tric review, 2013, 27(3):36-43.(in Chinese)[3]赖喜德, 张翔, 陈小明, 等. 水电机组推力轴承镜板泵及油循环冷却系统的水力优化设计[J]. 水利水电科技进展, 2016, 36(3): 62-67. LAI Xide,ZHANG Xiang,CHEN Xiaoming,et al. Hydraulic optimization design of runner-pump and oil circulating and cooling system for thrust bearing of hydroelectric units[J]. Advances in science and technology of water resources, 2016, 36(3): 62-67.(in Chinese)[4]BEZNOSOV A V, DROZDOV Y N, ANTONENKOV M A, et al. Tribology of hydrostatic bearings of coolant pumps of fast neutron reactors with lead coolant[J]. Journal of friction & wear, 2012, 33(5):338-344.[5]NASSAB S A G, MOAYERI M S. Three-dimensional thermohydrodynamic analysis of axially grooved journal bearings[J]. Journal of engineering tribology, 2002, 216(1):35-47.[6]DAI H L, YAO L J, PENG J L. Carrying capacity study of liquid hybrid bearing based on fluent[J]. Hydromechatronices engineering, 2016, 44(12):110-115.[7]熊万里, 侯志泉, 吕浪, 等. 基于动网格模型的液体动静压轴承刚度阻尼计算方法研究[J]. 机械工程学报, 2012, 48(23):118-126. XIONG Wanli, HOU Zhiquan, LYU Lang, et al. Method for calculating stiffness and damping coefficients of hybrid bearings based on dynamic mesh model[J]. Journal of mechanical engineering, 2012, 48(23):118-126.(in Chinese)[8]郭力, 沈志伟, 刘桂萍. 高效精密磨床砂轮主轴深浅腔动静压轴承静特性分析[J]. 润滑与密封, 2014, 39(2):1-8. GUO Li, SHEN Zhiwei, LIU Guiping. Analysis of static characteristics of the liquid hybrid bearings with deep-shallow cavity in a high efficiency and precision spindle of grinder[J]. Journal of lubrication engineering, 2014, 39(2):1-8.(in Chinese)[9]IWATSUBO T, ISHIMARU H, UCHIDA T. A study on static and dynamic characteristics of spiral-grooved Seals[J]. Transactions of the Japan society of mechanical engineers series C, 1999, 65(632):1395-1402.[10]NAGAI K, KANEKO S, TAURA H, et al. Numerical and experimental analyses of static characteristics for liquid annular seals with helical grooves in seal stator[J]. Journal of tribology, 2017, 140(3): 032201.[11]KANKI H, KAWAKAMI T. Experimental study on the static and dynamic characteristics of screw grooved seals[J]. Journal of vibration & acoustics, 1988, 110(3):326.[12]刘忠伟, 邓英剑, 刘少军, 等. 螺旋密封封液能力的计算及其优化[J]. 润滑与密封, 2006(8):132-135. LIU Zhongwei, DENG Yingjian, LIU Shaojun, et al. The calculation and optimization of liquid sealing capability of spiral seal[J]. Lubrication engineering, 2006(8):132-135.(in Chinese)[13]GOLDEN G H, TOKAR J V. Thermophysical properties of sodium[J]. Bibliography, 1969.[14]魏龙, 冯秀. 化工密封实用技术[M]. 北京:化学工业出版社, 2011.[15]BHARATB. Principles and applications to tribology[M].[S.L.] A John Wiley&Sons, 2013.[16]WU Y, ZHAO H, ZHANG C, et al. Optimization analysis of structure parameters of steam ejector based on CFD and orthogonal test[J]. Energy, 2018,151:79-93.