Numerical simulation and experiment for velocity field in jagged micro- channel
Jin Wen1,Zhang Hongyan2,He Wenbo3
(1.Department of Power Engineering,Xi′an Aerotechnical College,Xi′an,Shaanxi 710077,China;2.School of Environment and Municipal Engineering,Xi′an Architectural and Technological University,Xi′an,Shaanxi 710055,China;3.School of Energy and Power Engineering,Xi′an Jiaotong University,Xi′an,Shaanxi 710049,China)
Abstract:Under Re of 100 and 300 respectively,the flow field distributions in jagged micro-channel with side lengths of 800 μm were investigated by experimental measurement and numerical simulation.Applying micro-PIV technique,the research got the velocity vector distributions and streamline graphs of the flow field.The results show that the flow structures are the same in each gear of the micro-channel.It has high-speed zone and low-speed zone in the flow field of single gear,and the backflow appears in the flat top and corner with a complete vortex in the low-speed zone.A novel numerical method for simulating micro-scale flow field was established mainly by adopting porous medium model,realizable k-ε turbulence model,and single gear geometric model setting.The flow field distributions in the micro-channel are got by simulating and calculating under periodic boundary conditions.The simulation flow fields are consistent with the experimental results.Through the quantified analysis on the specific cross section,it proves that the simulation value and experimental value have a high degree of similarity,and the numerical simulation approach can be used in all the inflow velocity simulation for the complex structured micro-channels with a wider range of Reynolds.
金文, 张鸿雁, 何文博 . 齿形微通道内流流场数值模拟及试验研究[J]. 排灌机械工程学报, 2011, 29(3): 255-259.
Jin Wen,Zhang Hongyan,He Wenbo. Numerical simulation and experiment for velocity field in jagged micro- channel. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(3): 255-259.
[1]Wang Haoli,Wang Yuan,Zhang Jiazhong.Influence of ribbon structure rough wall on the microscale poiseuille flow[J].Journal of Fluids Engineering,2005,127 (6):1140-1145.[2]Wang Haoli,Wang Yuan.Flow in microchannels with rough walls:Flow pattern and pressure drop[J].Journal of Micromechanics and Microengineering,2007,17(3):586-596.[3]Wang Haoli,Wang Yuan.Influence of three-dimensional wall roughness on the laminar flow in microtube[J].International Journal of Heat and Fluid Flow,2007,28 (2):220-228.[4]王健,郝鹏飞 何枫.梯形截面微管道内流场的PIV测量[J].试验流体力学,2005,19(3):94-98.[5]王元,金文,何文博.锯齿型微通道内流流场的Micro-PIV实验研究[J].西安交通大学学报,2009,43(9):109-113.[6]金文,张鸿雁 何文博.微灌滴头平角齿形微通道流动试验研究[J].试验流体力学,2010,24(1):15-19.[7]金文,张鸿雁.灌水器内流道流场Micro-PIV试验分析[J].农业工程学报,2010,26(2):12-17.[8]Rawool A S,Mitra Sushanta K,Kandlikar S G.Numerical simulation of flow through microchannels with designed roughness[J].Microfluid Nanofluid,2006 (2):215-221.[9]陈建华 ,张会强 张贵田.含人为粗糙元微小冷却通道内的流动与换热[J].清华大学学报:自然科学版,2008,48(5):900-903.[10]金文,张鸿雁 何文博.多孔介质壁面条件下微尺度流动的数值模拟[J].排灌机械工程学报,2010,28(3):271-276.