Hydraulic design and numerical optimization of guide vane of AP1000 model nuclear main pump
Xie Rong 1, Qi Heng 1, Shan Yujiao2, Jin Weinan1
1.Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, Dalian University of Technology, Dalian, Liaoning 116024, China; 2.Shenyang Aero Engine Research Institute, China Aviation Industry Corporation I, Shenyang, Liao-ning 110015, China
Abstract:Based on self-design of impeller of AP1000 nuclear main pump,the upright guide vane was designed using foundational hydraulic methods. In order to reduce the hydraulic loss in the vane flow passage, two different schemes were proposed to optimize the vane design after analyzing the CFD computational results. The first one was to directly optimize the upright guide vanes design. And the other was to redesign the upright guide vanes as twisted spatial type to match up the impeller and subsequently to optimize the vanes. In the space guide vanes design and optimization process, two different solutions were adopted to parameterize the model, and the sample database were generated. With the hydraulic efficiency of impeller and guide vane being selected as the optimization objective, ANN and genetic algorithms were used to repeatedly optimize the blade profile of space guide vanes, and finally the guide vanes were obtained with better hydraulic efficiency matching with the impeller. The influence of different numbers of guide vane on the hydraulic efficiency was also discussed to provide the theoretical guidance and reference in hydraulic performance.
谢蓉, 祁恒, 单玉姣, 金伟楠. AP1000核主泵模型泵导叶水力设计与数值优化[J]. 排灌机械工程学报, 2014, 32(12): 1029-1034.
Xie Rong , Qi Heng , Shan Yujiao, Jin Weinan. Hydraulic design and numerical optimization of guide vane of AP1000 model nuclear main pump. Journal of Drainage and Irrigation Machinery Engin, 2014, 32(12): 1029-1034.
[1]Goto A. Study of internal flows in a mixed-flow pump impeller at various tip clearances using three-dimensio-nal viscous flow computations[J]. Journal of Turbomachinery, 1992, 114(2):373-382.[2]Goto A. The effect of tip leakage flow on part-load performance of a mixed-flow pump impeller[J]. Journal of Turbomachinery, 1992,114(2):383-391.[3]Goto A, Takemura T, Zangeneh M. Suppression of se-condary flows in a mixed flow pump impeller by application of three-dimensional inverse design method: Part 2—Experimental validation[J]. Journal of Turbomachi-nery,1996,118(3):544-551.[4]Zangeneh M, Goto A, Takemura T. Suppression of se-condary flows in a mixed flow pump impeller by application of three-dimensional inverse design method: Part 1—Design and numerical validation[J]. Journal of Turbomachinery, 1996,118(3):536-543.[5]Van Esch B P M, Kruyt N P. Hydraulic performance of a mixed-flow pump: Unsteady inviscid computations and loss models[J]. Journal of Fluids Engineering, 2001,123:256-264.[6]王红志.一种实用的混流泵叶轮设计方法[J].机电工程技术,2006,35(3):37-39. Wang Hongzhi. A practical design method of mixed flow pump impeller [J]. Mechanical and Electrical Engineering, 2006, 35(3):37-39.(in Chinese)[7]曹树良,梁莉,祝宝山,等.高比转速混流泵叶轮设计方法[J].江苏大学学报:自然科学版,2005,26(3):185-188. Cao Shuliang, Liang Li,Zhu Baoshan, et al. High specific speed mixed-flow pump impeller design method [J]. Journal of Jiangsu University:Natural Science Edition, 2005, 26(3): 185-188.(in Chinese)[8]张勤昭,曹树良,祝宝山,等.高比转速混流泵叶轮正反问题计算[J].清华大学学报:自然科学版,2007,47(9):1435-1438. Zhang Qinzhao, Cao Shuliang, Zhu Baoshan, et al. High specific speed mixed-flow pump impeller and reverse problem calculation [J]. Journal of Tsinghua University:Natural Science Edition, 2007,47(9): 1435-1438.(in Chinese)[9]林恺,曹树良,祝宝山,等.用于高比转速混流泵设计的流场计算[J].清华大学学报:自然科学版,2008,48(2):219-223. Lin Kai, Cao Shuliang,Zhu Baoshan, et al. Used for high speed flow field calculation of mixed flow pump design [J]. Journal of Tsinghua University:Natural Scien-ce Edition, 2008, 48(2): 219-223.(in Chinese)[10]邴浩,曹树良,谭磊.混流泵叶轮设计正反问题迭代方法[J].排灌机械工程学报,2011,29(4):277-281. Bing Hao, Cao Shuliang, Tan Lei. Mixed flow pump impeller design and iterative method [J]. Journal of Drainage and Irrigation Machinery Engineering, 2011, 29(4): 277-281.(in Chinese)[11]Wang Pengfei, Ruan Xiaodong. Medial axis transform method for shape design of hub and shroud contours of impellers[J]. Journal of Fluids Engineering, 2011, 133:0345021-0345024.[12]贾瑞宣,徐鸿.低比转速混流泵叶轮优化设计[J]. 排灌机械工程学报,2010,28(2):98-102. Jia Ruixuan, Xu Hong. Low specific speed mixed-flow pump impeller optimization design [J]. Journal of Drainage and Irrigation Machinery Engineering, 2010, 28(2): 98-102.(in Chinese)[13]谢蓉,单玉娇,王晓放.混流泵叶轮流动性能数值模拟和叶型优化设计[J]. 排灌机械工程学报,2010,28(4):295-299. Xie Rong, Shan Yujiao, Wang Xiaofang. Mixed flow pump impeller flow numerical simulation and perfor-mance profile optimization design [J]. Journal of Drai-nage and Irrigation Machinery Engineering, 2010, 28(4): 295-299.(in Chinese)[14]张栋俊,徐士鸣.类球形压水室出流管形状对核主泵性能的影响[J].水泵技术,2010(1):21-25. Zhang Dongjun,Xu Shiming. Kind of spherical pressu-rized water chamber discharge tube shape affect the performance of nuclear main pump [J].Pump Technology, 2010(1):21-25.(in Chinese)[15]王春林,彭娜,赵佰通,等.核主泵模型泵导叶进口边相对位置对泵性能的影响[J].排灌机械,2008,26(5):38-41. Wang Chunlin, Peng Na, Zhao Baitong,et al. The nuclear main pump vane pump model imports edge position effect the performance of the pump [J]. Irrigation and Drainage Machinery, 2008, 26(5): 38-41.(in Chinese)[16]杨从新,杜媛英,黎义斌. 导叶参数对混流泵水阻系数及效率的影响[J].排灌机械工程学报,2012,30(5):537-542. Yang Congxin, Du Yuanying, Li Yibin. Guide vane parameters on the efficiency of mixed flow pump water resistance coefficient and the influence of [J]. Journal of Drainage and Irrigation Machinery Engineering, 2012, 30(5): 537-542.(in Chinese)