Abstract:In order to study the temperature difference in cavitation field for water at room temperature and high temperature and to reveal thermodynamic effect on cavitation, the cavitation field on NACA0066(MOD)airfoil surface was simulated with CFD software based on mass transport equation and full cavitation model. Source term that depicts the thermodynamic effect was added in energy equation by importing UDF code and the saturated vapor pressure was set as a function of temperature. The results show that temperature altered in cavitation field because of absorption of latent heat when cavita-ting, and cavity zone temperature is respectively 0.13, 0.84, 13.00 K lower than that of upper steam, which is respectively at 293, 373, 473 K. In other words, the higher the temperature of the fluid, the greater temperature drop is in cavity zone. Moreover, with decrease of saturated pressure caused by the decrease of local temperature, the length of cavity is shortened.
王巍, 林茵, 王晓放, 王一名. 高温条件下热力学效应对空化的影响[J]. 排灌机械工程学报, 2014, 32(10): 835-839.
Wang Wei, Lin Yin, Wang Xiaofang, Wang Yiming. Thermodynamics effect on cavitation for high temperature water. Journal of Drainage and Irrigation Machinery Engin, 2014, 32(10): 835-839.
[1]Franc J P, Michel J M. Fundamentals of Cavitation[M]. Dordrecht:Kluwer Academic Publishers,2004.[2]Cervone A, Rapposelli E, D′Agostino L, et al. Thermal cavitation experiments on a NACA0015 hydrofoil[J]. Journal of Fluids Engineering, 2006, 128(2): 326-331.[3]Maria G D G, Daniela B, Antonio F. Analysis of thermal effects in a cavitating orifice using Rayleigh equation and experiments[J]. Journal of Engineering for Gas Turbines and Power, 2010, 132(9): 1-11.[4]Liu Shuhong, Wu Yulin, Xu Hongyuan. Numerical analysis of airfoil NACA0015 and centrifugal pump′s cavitation characteristic based on the thermodynamic effects[C]//Proceeding of the ASME 2009 Fluids Engineering Division Summer Meeting,2009.[5]Zhang X B, Qiu L M, Gao Y, et al. Computational fluid dynamic study on cavitation in liquid nitrogen[J]. Cryogenics,2008, 48: 432-438.[6]Hosangadi A, Ahuja V. Numerical study of cavitation in cryogenic fluids[J]. Journal of Fluids Engineering, 2005, 127(2): 267-281.[7]Watanabe S, Hidaka T, Horiguchi H. Steady analysis of the thermodynamic effect of partial cavitation using the singularity method[J]. Journal of Fluids Engineering, 2007, 129(2): 121-127.[8]季斌,罗先武,吴玉林,等. 考虑热力学效应的高温水空化模拟[J]. 清华大学学报:自然科学版,2010, 50(2):262-265. Ji Bin, Luo Xianwu, Wu Yulin, et al. Cavitating flow simulation for high temperature water based on thermodynamic effects[J].J Tsinghua Univ:Sci & Tech,2010,50(2): 262-265.(in Chinese)[9]时素果,王国玉,陈广豪. 质量传输模型在考虑热力学效应空化流动计算中的应用评价[J]. 应用力学学报,2011,28(6): 589-594. Shi Suguo,Wang Guoyu,Chen Guanghao. Evaluation of the mass transport models in computations of cavitating flows with thermal effects[J].Chinese Journal of Applied Mechanics, 2011, 28(6): 589-594.(in Chinese)[10]张瑶,罗先武,许洪元,等. 热力学空化模型的改进及数值应用[J]. 工程热物理学报,2010, 23(10): 1671-1674. Zhang Yao, Luo Xianwu, Xu Hongyuan, et al.The improvement and numerical applications of a thermodyna-mic cavitation model[J].Journal of Engineering Thermophysics,2010,23(10):1671-1674.(in Chinese)[11]刘厚林,刘东喜,王勇,等.三种空化模型在离心泵空化流计算中的应用评价[J].农业工程学报,2012,28(16): 54-59. Liu Houlin, Liu Dongxi, Wang Yong, et al.Applicative evaluation of three cavitating models on cavitating flow calculation in centrifugal pump[J].Transactions of the Chinese Society of Agricultural Engineering,2012,28(16): 54-59.(in Chinese)[12]刘艳,赵鹏飞,王晓放. 两种空化模型计算二维水翼空化流动研究[J].大连理工大学学报,2012,52(2):175-182. Liu Yan, Zhao Pengfei, Wang Xiaofang. Study of cavitating flows around two-dimensional hydrofoil using two cavitation models[J]. Journal of Dalian University of Technology, 2012, 52(2): 175-182.(in Chinese)[13]Singhal A K, Athavale M M, Li H. Mathematical basis and validation of the full cavitations model[J]. Journal of Fluids Engineering, 2002, 124(3): 617-624.[14]Kubota A, Kato H. Unsteady structure measurement of cloud cavitation on a foil section using conditional sampling techniques[J]. Journal of Fluids Engineering, 1989, 111(3): 204-210.[15]王福军.计算流体动力学分析——CFD软件原理与应用[M]. 北京: 清华大学出版社, 2004.