Abstract：For further researching on authenticity and accuracy of the numerical simulation in tubular pump, the numerical simulation in tubular pump was conducted with different parameters. The simulation calculation results were compared with the data of positive energy test of a two-way tubular model pump in Shanghai. In the process of the numerical simulation, the setting of parameters, such as the meshing of grid, the choices of computational model and the boundary conditions were compared and analyzed. The characteristics of pressure and flow pattern were observed. The closest scheme was selected, which might have referential value for tubular pump numerical simulation. The comparisons with test data and the interior pressure distribution and flow pattern show that S-A model is better than Realizable k-ε model. When the pressure of inlet is 0, the numerical simulation with S-A model is proved to be the best.
郑源, 刘君, 陈阳, 李玺, 杨雪林. 基于Fluent的贯流泵数值模拟[J]. 排灌机械工程学报, 2010, 28(3): 233-237.
Zheng Yuan, Liu Jun, Chen Yang, Li Xi, Yang Xuelin. Numerical simulation of tubular pump based on Fluent. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(3): 233-237.
［1］陆林广,陈坚,梁金栋,等. 灯泡贯流泵装置的优化水力设计［J］.水利学报,2008,39(3):355-360.Lu Linguang, Chen Jian, Liang Jindong, et al. Optimal hydraulic design of bulb tubular pump system［J］. Journal of Hydraulic Engineering, 2008,39(3):355-360. (in Chinese)［2］吕建新,许跃华.大型灯泡式贯流泵CFD计算［J］.排灌机械,2007,25(5):17-19.Lü Jianxin, Xu Yuehua. CFD calculation for large-scale bulb tubular pump［J］. Drainage and Irrigation Machinery, 2007, 25(5):17-19. (in Chinese)［3］关醒凡,商明华,谢卫东,等. 后置灯泡式贯流泵装置水力模型［J］.排灌机械,2008,26(1):25-28.Guan Xingfan, Shang Minghua, Xie Weidong, et al. Hydraulic model and its pilotplant unit for rear bulb-type cross-flow pump［J］. Drainage and Irrigation Machinery,2008,26(1):25-28. (in Chinese)［4］陆林广,梁金栋,陈阿萍,等.卧式前轴伸泵装置流道三维流动及水力损失［J］.排灌机械,2009,27(1):47-50.Lu Linguang, Liang Jindong, Chen Aping, et al. 3-D turbulet flow and hydraulic loss for pump system with horizontal forward-extension shaft［J］. Drainage and Irrigation Machinery, 2009, 27(1):47-50. (in Chinese)［5］Shi Depan, Luo Zhenghong, Zheng Zuwei. Numerical simulation of liquid-solid two-phase flow in a tubular loop polymerization reactor［J］. Powder Technology, 2010,198(1): 135-143.［6］成立,刘超,汤方平,等.对称翼型转轮双向竖井贯流泵装置［J］.排灌机械,2008,26(5):50-53.Cheng Li, Liu Chao, Tang Fangping,et al. Shaft tubular pump system with symmetric aerofoil blade［J］. Drainage and Irrigation Machinery, 2008,26(5):50-53.(in Chinese)［7］Xu Binggui, Zhang Yanping, Wang Hui, et al. Application of numerical simulation in the solid expandable tubular repair for casing damaged wells［J］. Petroleum Exploration and Development, 2009, 36(5):651-657.［8］王瑞金,张凯，王刚.Fluent技术基础与应用实例［M］.北京:清华大学出版社,2007.［9］Avraham I K, Efim G E, Gerd W, et al. Coaxial tubular solar collector constructed from polymeric materials: an experimental and transient simulation study［J］.Energy Conversion and Management, 2003, 44(16):2549-2566.［10］Wongsuwan W, Kumar S, Neveu P,et al. A review of chemical heat pump technology and applications［J］. Applied Thermal Engineering, 2001(15):1489-1519.
