Abstract:The flow inside a Venturi injector was investigated numerically by Fluent software based on Reynolds-averaged Navier-Stokes equations and Standard k-ε turbulent model,and the reliability of calculations was examined and validated. 15 different throat structures constituted by inlet diameters as 4,5,and 6mm,respectively,and diameter ratio λ of outlet diamer to inlet diameter as 1.0,1.1,1.2,1.3 and 1.4,respectively,were conducted for predicting injection performance. The results showed that the throat diameter has some influence on the internal flow behaviour of throat and diffusion pipe,injection performance and efficiency.The diameter ratio λ of outlet diamer to inlet diameter for Venturi throat has more influence on the injection performance than the throat inlet diameter.According to the principle of high efficiency,the range of diameter ratio is from 1.2 to 1.3.The regression models between injection efficiency and ratio of injection rate to inlet flow rate were established when λ was either 1.2 or 1.3,and their maximum efficiency was predicted.The Venturi injector with the throat inlet diameter of 4mm and diameter ratio of 1.3 can achieve the highest effeciency of 15.5%,having no vortex inside the diffusion pipe and less average turbulent energy at the same cross sections compared with diameter ratio of 1.0.The research results provide a theoretical reference for optimal design of Venturi injector.
[1]李百军,毛罕平,等.并联文丘里管吸肥装置的研究及其参数选择[J].排灌机械,:.[2]王淼,黄兴法,李光永.文丘里施肥器性能数值模拟研究[J].农业工程学报,2006,22(7):27-31.[3]Jun Ishimoto, Kenjiro Kamijo. Numerical simulation of cavitating flow of liquid helium in venturi channel [ J ]. Cryogenics ,2003,43 ( 1 ) :9 - 17.[4]严海军,初晓一,王敏,等.微灌系统文丘里施肥器吸肥性能试验[J].排灌机械工程学报,2010,28(3):251-255.[5]Lran E N, Rodrigo M P. Performance of low-cost ejectors [ J ]. Journal of Irrigation and Drainage Engineering, 2004,130(2) :122 - 128.[6]Reader-Harris M J,Brunton W C,Gibson J J, et al. Dis- charge coefficients of Venturi tubes with standard andnon-standard convergent angles [ J ]. Flow Measurement and Instrumentation ,2001,12 ( 2 ) : 135 - 145.[7]龙新平,鄢恒飞,张松艳等.喉管长度对环形射流泵性能影响的数值模拟[J].排灌机械工程学报,2010,28(3):198-206.[8]鄢恒飞,龙新平.喷嘴偏心距对射流泵性能影响的数值模拟[J].武汉大学学报:工学版,2010,43(1):34-37.[9]Long Xinping,Han Ning, Chen Qian. Influence of nozzle exit tip thickness on the performance and flow field of jet pump[J ]. Journal of Mechanical Science and Technology,2008,22 ( 10 ) : 1959 - 1965.