Abstract:The sedimentation tank is the key facility to ensure the safe operation of drip irrigation system in Hetao irrigation areas. It is of great significance to study the flow field characteristics for optimizing the structure of the sedimentation tank and improving the sediment deposition efficiency. A new type of gravity settling basin for Yellow River irrigation areas was studied. It reduced the sediment settling distance by setting the inclined pipe in the sedimentation tank, and further improving the sedimentation efficiency. Based on the numerical simulation technology, the Realizable k-ε model in Star-ccm+software was used to simulate the flow process of the inclined tube-gravity sedimentation tank which was used in Hetao irrigation areas. The numerical simulation results were in good agreement with the measured data, which showed that the numerical simulation results could well reflect the flow field characteristics of the inclined tube-gravity sedimentation tank. The simulation results showed that the flow pattern in the inclined tube area of the settling basin was relatively stable, which was favorable for stable settling of the sediment. The vortex area at the front of the sedimentation tank and the bottom of the front area and the top of the back area of inclined tube area was not conducive to sediment settlement. The water absorption effect of the overflow weir in the back of the sedimentation tank affected the flow stability in the inclined tube area and reduced the sedimentation efficiency. Therefore, it is necessary to further optimize the structural parameters of the sedimentation tank. The research indicates that this type of settling basin needs to optimize the hole arrangement pattern of the adjusting flow board, the assembly height of the inclined tube and the position of the overflow weir.
王克远, 李云开, 杨培岭*, 任树梅. 引黄滴灌斜管式重力沉沙池流场特性数值模拟[J]. 排灌机械工程学报, 2018, 36(10): 1041-1046.
WANG Keyuan, LI Yunkai, YANG Peiling*, REN Shumei. Numerical simulation of flow field characteristics of inclined tube-gravity sedimentation tank for drip irrigation in Yellow River. Journal of Drainage and Irrigation Machinery Engin, 2018, 36(10): 1041-1046.
[1]TARPAGKOU R, PANTOKRATORAS A. CFD metho-dology for sedimentation tanks: the effect of secondary phase on fluid phase using DPM coupled calculations[J]. Applied mathematical modelling, 2013, 37(5):3478-3494.[2]RAMIN E, AGNER D S W, YDE L, et al. A new settling velocity model to describe secondary sedimentation[J]. Water research, 2014, 66:447-458.[3]陶洪飞,戚印鑫,杨海华,等.河水滴灌重力沉沙过滤池中浑水流场分布规律[J].排灌机械工程学报,2017, 35(9):785-791. TAO Hongfei, QI Yinxin, YANG Haihua, et al. Study on characteristics of muddy water flow field in gravity sand sedimentation pool for drip irrigation with river water[J]. Journal of drainage and irrigation machinery engineering, 2017, 35(9):785-791.(in Chinese)[4]申庚午.引黄滴灌条件下重力式沉沙过滤复合系统优化设计与应用研究[D].北京:中国农业大学,2016.[5]张军.圆中环沉沙排沙池模型试验及流场数值模拟研究[D].乌鲁木齐:新疆农业大学,2015.[6]刘佳节.黏性细颗粒泥沙絮凝及沉降过程细观尺度数值模拟[D].北京:中国农业大学,2016.[7]SHIH T H, LIOU WW, SHABBIR A, et al. A new k-ε eddy viscosity model for high Reynolds number turbulent flows model development and validation[J]. Computers fluids, 1995, 24(3):227-238.[8]华根福, 刘焕芳. 调流墙对微灌用沉沙池水流流态的影响分析研究[J]. 中国农村水利水电, 2012(10):13-16. HUA Genfu, LIU Huanfang. Research on the effect of adjusting flow board on flow of the sand basin for micro-irrigation[J]. China rural water and hydropower, 2012(10):13-16.(in Chinese)