Abstract:The relationship between the wear rates on the surfaces of the impeller as well as volute and the sediment concentration was investigated using the distribution of the wear rates. An Eulerian-Lagrangian computational fluid dynamics(CFD)procedure was used to simulate steady liquid-solid two-phase flow for various pump operating conditions. The FINNIE model was used to predict the abrasion of the surface of impeller and volute. It was found that the relative value of wear rate of impeller and casing surface increased with the increase of sediment concentration; it was larger at the low flow rate of the pump, while the value was lower in the high efficiency condition of the pump. The relative value for the casing surface is larger than that for the impeller surface. The relative value for flow parts is low in the high efficiency area of the pump.
彭光杰, 王正伟, 付硕硕. 离心式泥泵过流部件的磨损特性[J]. 排灌机械工程学报, 2015, 33(12): 1013-1018.
PENG Guangjie, WANG Zhengwei, FU Shuoshuo. Wear characteristics of flow parts of centrifugal dredge pump. Journal of Drainage and Irrigation Machinery Engin, 2015, 33(12): 1013-1018.
[1]PATANKAR N A,JOSEPH D D. Modeling and numerical simulation of particulate flows by the Eulerian-Lagrangian approach [J]. International journal of multiphase flow,2001,27(10):1659-1684.[2]PATANKAR N A,JOSEPH D D. Lagrangian numerical simulation of particulate flows[J]. International journal of multiphase flow,2001,27(10):1685-1706.[3]吴伟章,吴玉林,任静,等. 水轮机转轮内部磨损预测[J]. 工程热物理学报,2000,21(6):709-712. WU Weizhang, WU Yulin, REN Jing, et al. Numerical simulation on silt abrasion in a hydraulic turbine runner[J]. Journal of engineering thermophysics, 2000,21(6):709-712.(in Chinese)[4]赵万勇. 含沙水流对泵叶轮磨损原因及改进措施[J]. 排灌机械,2001,19(1):16-19. ZHAO Wanyong. Wear and tear of pump impeller due to sand-laden flow and its improving measures[J]. Drainage and irrigation machinery,2001,19(1):16-19.(in Chinese).[5]李仁年,徐振法,韩伟,等. 渣浆泵内部流场数值模拟与磨损特性分析[J]. 排灌机械,2007,25(2): 5-8. LI Rennian,XU Zhenfa,HAN Wei, et al. Numerical simulation of interior flow and wear character in slurry pumps[J]. Drainage and irrigation machinery,2007, 25(2):5-8.(in Chinese).[6]李昳,何伟强,朱祖超,等. 脱硫泵固液两相流动的数值模拟与磨损特性[J]. 排灌机械,2009,27(2):124-128. LI Yi,HE Weiqiang,ZHU Zuchao, et al. Numerical simulation of solid-liquid two-phase flow and abrasion characteristics in desulfurization pump [J].Drainage and irrigation machinery,2009,27(2):124-128.(in Chinese)[7]刘小兵. 水力机械泥沙磨损的数值模拟[J]. 四川工业学院学报,2000,19(2):79-84. LIU Xiaobin. Numerical simulation of silt abrasive erosion in hydraulic machinery[J]. Journal of Sichuan University of Science and Technology,2000,19(2): 79-84.(in Chinese).[8]PENG G, WANG Z, XIAO Y, et al. Abrasion predictions for Francis turbines based on liquid-solid two-phase fluid simulations[J]. Engineering failure analysis, 2013, 33(7):327—335.[9]施卫东,龙飞,张德胜,等. 潜水轴流泵内部固液两相流动的数值模拟[J]. 排灌机械工程学报,2012,30(5):508-512. SHI Weidong, LONG Fei, ZHANG Desheng,et al. Numerical simulation of solid liquid two phase turbulent flow in submersible axial flow pump[J]. Journal of drainage and irrigation machinery engineering, 2012, 30(5): 508-512.(in Chinese)[10]叶晓琰,田莹莹,丁亚娜,等. 高剪切匀浆泵两相流动的数值模拟[J]. 排灌机械工程学报,2012,30(4): 407-411. YE Xiaoyan,TIAN Yingying,DING Yana,et al.Numeri-cal simulation of two phase flow in high shear pulp pump[J]. Journal of drainage and irrigation machinery Engineering, 2012,30(4): 407-411.(in Chinese)[11]吴波. 渣浆泵固液两相三维湍流及冲蚀磨损特性研究[D]. 长沙: 中南大学, 2010.[12]张恒. 渣浆泵叶轮内两相湍流数值模拟及磨损特性分析[D]. 昆明: 昆明理工大学, 2013.[13]熊茂涛. 含沙水流中离心式水泵过流部件泥沙磨损的数值模拟[D]. 成都: 西华大学, 2006.[14]FINNIE I. Some observations on the erosion of ductile metals[J]. Wear, 1972, 19(1):81-90.[15]AHLERT K R. Effects of particle impingement angle and surface wetting on solid particle erosion of ANSI 1018 steel[D]. Oklahoma: University of Tulsa,1994.[16]高忠信,周先进. 水轮机转轮固液两相三维紊流计算及磨损预估[J]. 水利学报, 2002(9):37-43. GAO Zhongxin, ZHOU Xianjin. Numerical prediction on silt wearing of turbine runner by means of two-phase turbulent flow simulation[J]. Journal of hydraulic engineering, 2002(9):37-43.(in Chinese)[17]彭光杰. 含沙水流对大型混流式水轮机运行特性的影响研究[D]. 北京:清华大学, 2009.