Abstract：In order to analyze the structural problems of an axial pump impeller at unstable operation saddle zone and to study the stability of the structure, numerical simulation was applied to solve the Reynolds-averaged Navier-Stokes equation by the finite volume method, and standard k-ε turbulence model was chosen in computation fluid dynamics software Fluent. The flow field and pump casing were calculated by one way fluid-solid coupling method in ANSYS Workbench, and stress distribution and total deformation distribution of the pump casing at different operating conditions were obtained and studied. The results show that an unsteady operation zone exits between 40% and 75% rated flow rate. The numerical simulation could accurately depict the flow field of the axial pump, and the unstable flow pattern of the pump device is gradually aggravating with the decreasing of flow rate. The stress of blade is markedly uneven and stress concentration occurs at the blade root, and with decreasing of flow rate, the maximum equivalent stress increases gradually, while the impeller structure satisfies the safety requirements. The maximum deformation occurs at the tip of blade inlet, and with the decrease of flow rate it increases and then decreases, while large deformation zone continues to expand. The research could provide reference for the safety and stable operation of axial flow pumps.
罗欣, 郑源, 张新. 轴流泵马鞍区流场流固耦合数值模拟[J]. 排灌机械工程学报, 2014, 32(6): 466-471.
Luo Xin, Zheng Yuan, Zhang Xin. Numerical simulation of flow field for axial pump saddle zone based on fluid-structure interaction. Journal of Drainage and Irrigation Machinery Engin, 2014, 32(6): 466-471.
[1]徐磊,陆林广,陈伟,等.南水北调工程邳州站竖井贯流泵装置进出水流态分析[J].农业工程学报,2012,28(6):50-56. Xu Lei, Lu Linguang, Chen Wei, et al. Flow pattern analysis on inlet and outlet conduit of shaft tubular pump system of Pizhou pumping station in South-to-North Water Diversion Project [J]. Transactions of the CSAE, 2012,28(6):50-56.(in Chinese)[2]张德胜,施卫东,张华,等.轴流泵叶轮端壁区流动特性数值模拟[J].农业机械学报,2012,43(3):73-77. Zhang Desheng, Shi Weidong,Zhang Hua, et al. Numerical simulation of flow field characteristics in tip clearance region of axial-flow impeller [J]. Transactions of the Chinese Society for Agricultural Machinery, 2012,43(3):73-77.(in Chinese)[3]陆林广,伍杰,陈阿萍,等.立式轴流泵装置的三维湍流流动数值模拟[J].排灌机械,2007,25(1):29-32. Lu Linguang,Wu Jie,Chen Aping,et al. Numerical si-mulation of 3D turbulent flow in a vertical axial-flow pump system [J].Drainage and Irrigation Machinery, 2007,25(1):29-32.(in Chinese)[4]郑源,茅媛婷,周大庆,等.低扬程大流量泵装置马鞍区的流动特性[J].排灌机械工程学报,2011,29(5):369-373. Zheng Yuan, Mao Yuanting,Zhou Daqing,et al. Flow characteristics of low-lift and large flow rate pump insta-llation in saddle zone[J]. Journal of Drainage and Irrigation Machinery Engineering, 2011,29(5):369-373.(in Chinese)[5]刘君,华学坤,郑源,等.低扬程立式轴流泵装置模型马鞍形区研究[J].南水北调与水利科技,2011,9(4):34-38. Liu Jun, Hua Xuekun,Zheng Yuan,et al. Study on performance of saddle zone in low lift vertical axial-flow pump system model[J]. South-to-North Water Transfers and Water Science & Technology, 2011,9(4):34-38.(in Chinese)[6]王福军,张玲,张志民,等.轴流泵不稳定流场的压力脉动特性研究[J].水利学报,2007,38(8):1003-1009. Wang Fujun, Zhang Ling, Zhang Zhimin,et al. Analysis on pressure fluctuation of unsteady flow in axial-flow pump[J]. Journal of Hydraulic Engineering,2007,38(8):1003-1009.(in Chinese)[7]江伟,郭涛,李国君,等.离心泵流场流固耦合数值模拟[J].农业机械学报,2012,43(9):53-56. Jiang Wei,Guo Tao,Li Guojun, et al. Numerical calculation on flow field in centrifugal pump based on fluid-structure interaction theorem[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012,43(9):53-56.(in Chinese)[8]郑小波,罗兴琦,邬海军,等.轴流式叶片的流固耦合振动特性分析[J].西安理工大学学报,2005,21(4):342-346. Zheng Xiaobo, Luo Xingqi,Wu Haijun,et al. Analysis of fluid-solid coupling dynamic characteristics for the a-xial flow blades [J]. Journal of Xi′an University of Technology, 2005,21(4):342-346.(in Chinese)[9]孔繁余,陈浩,王婷,等.基于流固耦合的减压塔底泵泵体强度分析[J].机械工程学报,2013,49(2):159-164. Kong Fanyu,Chen Hao, Wang Ting,et al. Strength analysis of decompression tower bottom pump′s pump ca-sing based on fluid-solid coupling [J]. Journal of Mechanical Engineering, 2013,49(2):159-164.(in Chinese)[10]廖伟丽,徐斌,逯鹏,等.部分负荷下混流式水轮机转轮叶片变形对流场的影响[J].机械工程学报,2006,42(6):55-59. Liao Weili, Xu Bin,Lu Peng,et al. Influence of runner blade deformation on fluid field of francis turbine under part load chinese[J].Journal of Mechanical Enginee-ring,2006,42(6):55-59.(in Chinese)[11]贺秋冬,龚曙光,丁涛,等.对旋轴流局部通风机叶片断裂原因分析与改进[J].机械工程学报,2011,47(24):122-127. He Qiudong,Gong Shuguang,Ding Tao, et al. Analyses on blade fracture of contra-rotating axial fan for mine local ventilator and its improvement measures[J]. Journal of Mechanical Engineering, 2011,47(24):122-127.(in Chinese)[12]成立,吴璐璐,刘超,等.大型轴流泵水力不稳定区研究[J].灌溉排水学报,2010,29(2):102-104. Cheng Li, Wu Lulu, Liu Chao,et al. Hydraulic unstable operating region of large scale axial flow pump[J]. Journal of Irrigation and Drainage, 2010,29(2):102-104.(in Chinese)[13]杨华,孙丹丹,汤方平,等.轴流泵非稳定工况下叶轮进口流场试验研究[J].排灌机械工程学报,2011,29(5):406-410. Yang Hua, Sun Dandan, Tang Fangping,et al. Experiment research on inlet flow field for axial-flow pump at unsteady operating condition[J]. Journal of Drainage and Irrigation Machinery Engineering,2011,29(5):406-410.(in Chinese)[14]Masahiro Miyabe, Hideaki Maeda, Isamu Umeki, et al. Unstable head-flow characteristic generation mechanism of a low specific speed mixed flow pump [J].Journal of Thermal Science,2006,15(2):115-120.[15]潘旭,李成,铁瑛,等.轴流泵叶片流固耦合强度分析[J].水力发电学报,2012,31(4):221-226. Pan Xu, Li Cheng, Tie Ying,et al. Strength analysis of fluid-solid coupling of axial flow pump blades [J]. Journal of Hydroelectric Engineering, 2012,31(4):221-226.(in Chinese)[16]施卫东,徐燕,张启华,等.基于流固耦合的多级潜水泵叶轮结构强度分析[J].农业机械学报,2013,44(5):70-73. Shi Weidong, Xu Yan,Zhang Qihua,et al. Structural strength analysis of multistage submersible pump impe-ller based on fluid-structure interaction[J].Transactions of the Chinese Society for Agricultural Machinery, 2013,44(5):70-73.(in Chinese)[17]郑源,李平,陈新方,等.水力机械多功能模型试验台循环管路系统水力设计[J].流体机械,2001,29(11):16-18. Zheng Yuan, Li Ping, Chen Xinfang,et al. Hydraulic design on circulating pipe system with multiple-rig for hydraulic machinery model test [J]. Fluid Machinery,2001,29(11):16-18.(in Chinese)
