Abstract:Based on Reynolds Time-Averaged N-S equations and the standard k-ε turbulent model,FLUENT software and SIMPLEC algorithm were used to simulate the three-dimensional incompressible turbulent flow fields in an axial-flow pump with and without front guide impeller under the design condition.The velocity and pressure distributions were obtained and analyzed.Meanwhile,performance predictions,and analysis of the head and efficiency with or without front guide impeller were done under different flow rate.With front guide impeller performance instability region became narrower,and its efficiency slightly decreased.By analyzing the interior flow field characteristics and the influence of front guide impeller on the performance of the axial-flow pump,beneficial references can be provided to its hydraulic optimized design.
王春林;赵佰通;彭娜;司艳雷. 带前置导轮轴流泵内流场数值模拟及性能预测[J]. 排灌机械工程学报, 2008, 26(6): 41-45.
WANG Chun-lin, ZHAO Bai-tong, PENG Na, SI Yan-lei. Numerical simulation and performance prediction of interior flow field for axial-flow pump with front guide impeller. Journal of Drainage and Irrigation Machinery Engin, 2008, 26(6): 41-45.
[1] 李同卓,陈坚,陆宏圻.对轴流泵前置导轮设计的探讨[J].核动力工程,2004,25(3):270-274[2] Yu H,Kivilathti J.CFD modeling ofthe flow field inside a reflow oven[J].Soldering and Surface Mount Technology,2002,14(1):38-44[3] 王春林,司艳雷,郑海霞.旋流自吸泵内部流场的数值模拟[J].排灌机械,2008,26(2):31-35[4] Changming YANG,Cichang CHEN,Jinnuo WANG.Three-Dimensional viscous numerical simulation of tip clearance flow in axial-flow pump[J].Journal of Thermal Science,2003,12(3):231-233[5] Caridad J,Kenyery F.CFD analysis of electric submersible pumps(ESP)handling two-phase mixtures[J].Transaction of the ASME:Journal of Energy Resource Technology,2004,126(2):99-103[6] 李龙,王泽,胡荣霞.轴流泵内部流动的压力及性能研究[J].水泵技术,2007(1):29-31[7] 杨昌明,陈次昌,王金诺.轴流泵端壁间隙流动特性的数值研究[J].机械工程学报,2003,39(9):49-51[8] WANG Fu-jun,LI Yao-jun,CONG Guo-hui.CFD simulation of 3 D flow in large-bore axial-flow pump with half-elbow suction sump[J].Journal of Hydrodynamws:Ser B,2006,18(2):243-247[9] 关醒凡.泵的理论与设计[M].北京:机械工业出版社,1998:366-379