Experimental analysis of dynamic stress on blades of hydro-turbine
Chen Xueli1, He Yongmin2, Wang Jun1, Wang Quan1
1.School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China; 2.Dongfang Electric Machinery Co. Ltd., Deyang, Sichuan 618000, China
Abstract:A piece of experimental work is conducted on the different blades in the runner of a 600 MW hydro-turbine to study its operational stability and dynamic stress. The strain gauge data at 30 locations on a blade in the runner are acquired online by using a wireless dynamics stress instrument installed on the top of the power generator set, then the variation and frequency characteristics of dynamic stress at different guide vane openings are analyzed offline. Meanwhile, the vibration and pressure pulsation data in this machine are monitored simultaneously using another instrument based on NI hardware, the results are compared with and correlated to the dynamic stress observations. It is indicated that the amplitude of dynamic stress at round 30% design opening is higher than in the vortex-rope operational region, meanwhile the spectrum of pressure fluctuations in the penstock and draft tube has some similarity to that of dynamic stress. In the spectrum of pressure fluctuations and dynamic stress, the guide vane passing frequency and harmonics as well as plenty frequency components ranged in 30-50 Hz can be observed evidently.
陈学力, 何永明, 王军, 汪泉. 水轮机真机转轮动应力试验分析[J]. 排灌机械工程学报, 2015, 33(7): 589-593.
Chen Xueli, He Yongmin, Wang Jun, Wang Quan. Experimental analysis of dynamic stress on blades of hydro-turbine. Journal of Drainage and Irrigation Machinery Engin, 2015, 33(7): 589-593.
[1]张丽霞. 混流式水轮机转轮叶片疲劳裂纹控制研究[D]. 北京:清华大学机械工程学院,2010.[2]程良骏. 水轮机[M]. 北京:机械工业出版社, 1981:319-322.[3]Saeed R A, Galybin A N. Simplified model of the turbine runner blade[J]. Engineering Failure Analysis, 2009,16(7):2473-2484.[4]张琼, 谭恢村. 轴流式水轮机转轮刚强度研究[J]. 东方电机, 2010(1):91-96. Zhang Qiong, Tan Huicun. Stiffness and strength of axial flow turbine runner[J]. Dongfang Electrical Machine, 2010(1):91-96.(in Chinese)[5]王文全,张立翔, 闫妍,等. 混流式水轮机导叶叶道内湍流场的大涡模拟[J]. 热能与动力工程, 2009,24(2):257-260. Wang Wenquan, Zhang Lixiang, Yan Yan, et al. Large eddy simulation of the turbulent flow field in guide vane flow passages of a mixed-flow type water turbine[J]. Journal of Engineering for Thermal Energy & Power, 2009,24(2):257-260.(in Chinese)[6]Franco-Nava J M, Dorantes-Goómez O, Rosado-Tamariz E, et al. Flow induced stresses in a Francis turbine runner using computer-based design tools[C]//Proceedings of the ASME 2009 Fluids Engineering Division Summer Meeting, 2009:2245-2252.[7]Negru R, Muntean S, Marsavina L, et al. Computation of stress distribution in a Francis turbine runner induced by fluid flow[J]. Computational Materials Science, 2012,64:253-259.[8]肖若富, 王正伟, 罗永要. 轴流转浆式水轮机桨叶的动应力特性[J]. 清华大学学报:自然科学版, 2007,47(11):2014-2017. Xiao Ruofu, Wang Zhengwei, Luo Yongyao. Dynamic stress characteristics of Kaplan turbine blades[J]. Journal of Tsinghua University: Science and Technology, 2007,47(11):2014-2017.(in Chinese)[9]肖若富, 王正伟, 罗永要. 涡带工况下混流式水轮机转轮动应力特性分析[J]. 水力发电学报, 2007,26(4):130-134,140. Xiao Ruofu, Wang Zhengwei, Luo Yongyao. Dynamic stress analysis of Francis turbine with partial load[J]. Journal of Hydroelectric Engineering, 2007,26(4):130-134,140.(in Chinese)[10]肖若富, 王正伟, 罗永要. 基于流固耦合的混流式水轮机转轮静应力特性分析[J]. 水力发电学报, 2007,26(3):120-123,133. Xiao Ruofu, Wang Zhengwei, Luo Yongyao. Stress analysis of Francis turbine runners based on FSI[J]. Journal of Hydroelectric Engineering, 2007,26(3):120-123,133.(in Chinese)[11]刘伦洪,郑莉媛. 水轮机动应力测量仪的研制[J]. 华中科技大学学报: 自然科学版, 2005,33(10):29-31. Liu Lunhong, Zheng Liyuan. Research and design of dynamic stress instrument for hydraulic generators[J]. Journal of Huazhong University of Science and Technology: Nature Science Edition, 2005,33(10):29-31.(in Chinese)[12]钱勤,张克危,刘伦洪,等. 大朝山水电站6号机组运行稳定性与转轮动应力研究[J]. 大电机技术, 2006(3):35-39. Qian Qin, Zhang Kewei, Liu Lunhong, et al. Research on operation stability and runner dynamic stress of Dachaoshan Hydropower Station Unit 6[J]. Large Electric Machine and Hydraulic Turbine, 2006(3):35-39.(in Chinese)