Abstract:To study the characteristics of internal flow in the gap of interstage seal in supercritical boi-ler feed pumps, a few interstage seal models with various gap sizes were established and the fluid flows in these seals were simulated numerically. The pressure and velocity distributions in the axial and circumferential directions, and the pressure variation along the axial direction were calculated under a pulse inlet pressure. The results show that the fluid hydrostatic pressure and velocity have three variation stages through the seal in the axial direction, namely sharp drop, ascendant and linearly descen-dent stages. The greater the gap′s size is, the smaller the static pressure is, and the faster the velocity is. The static pressure distribution is not uniform in the circular cross-sections and presents a certain periodicity in the circumferential direction. In the annular cross-sections the high-velocity region appears near the rotating inner wall, but the low-velocity region occurs near the stationary outer wall. In addition, under a pulse inlet pressure, the pressure pulsating frequency in the middle and at the outlet of the seal is the same as the frequency at the inlet. The tail pressure is mainly determined by the outlet pressure, thus it fluctuates only within a certain amplitude.
刘刚, 付强*, 朱荣生, 王秀礼, 张本营, 李梦圆. 超临界锅炉给水泵级间密封间隙流动特性[J]. 排灌机械工程学报, 2018, 36(5): 391-396.
LIU Gang, FU Qiang*, ZHU Rongsheng, WANG Xiuli, ZHANG Benying, LI Mengyuan. Characteristics of flow through gap of interstage seal in supercritical boiler feed pump. Journal of Drainage and Irrigation Machinery Engin, 2018, 36(5): 391-396.
[1]HUANU Si,YANU Fuxiang,GUO Jing. Numerical simulation of 3D unsteady flow in centrifugal pump by dyna-mic mesh technique[J]. Procedia engineering,2013,61: 270-275.[2]TVERDOKHLEB I,KNYAZEVA E,BIRUKOV A,et al. About designing the flow part of a multi-stage pump with a minimum radial dimensions[J]. Procedia enginee-ring,2012, 39:84-90.[3]张学静,杨军虎.多级泵内部流场的三维数值模拟及性能预测[J].流体机械,2011,39(8): 24-28. ZHANG Xuejing,YANG Junhu. Three-dimensional numerical simulation and performance prediction of multistage pump[J]. Fluid machinery,2011,39(8): 24-28.(in Chinese)[4]CONSTANTINESCU V N. Basic relationships in turbulent lubrication and their extension to include thermal effects[J]. Journal of lubrication technology,1973, 95(2): 147-154.[5]HIRS G G. A bulk-flow theory for turbulence in lubricant films[J]. Journal of lubrication technology, 1973,95(2):137-145.[6]ELROD H G,NG C W. A theory for turbulent fluid films and its application to bearings[J].Journal of lubrication technology,1967,89(3):346-362.[7]GUINZBURG A,BRENNEN C E,ACASTO A J, et al. Experimental results for the rotordynamic characteristics of leakage flows in centrifugal pumps[J]. Journal of fluids engineering,1994,116(1): 110-115.[8]KIM E,PALAZZOLO A. Rotordynamic force prediction of a shrouded centrifugal pump impeller-part 1: numeri-cal analysis[J]. Journal of vibration and acoustics,2016, 138(3):1-10.[9]DING H,VISSER F C,JIANG Y,et al. Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications[J].Journal of fluids engineering,2011,133(1): 1-14.[10]张塬东, 张琼, 吴大转, 等.立式双级自吸泵水力性能分析及内部结构改进[J]. 流体机械, 2017, 45(9): 33-39. ZHANG Yuandong, ZHANG Qiong,WU Dazhuan, et al. Improvement design of a vertical double-stage self-priming pump[J]. Fluid machinery, 2017, 45(9):33-39.(in Chinese)[11]李文广,费振桃,蔡永雄. 离心油泵叶轮口环间隙对性能的影响[J].水泵技术,2004(5): 7-13. LI Wenguang, FEI Zhentao, CAI Yongxiong. Effect of clearance of wear-ring on the centrifugal oil pump[J]. Pump technology,2004(5): 7-13.(in Chinese)[12]郭豹, 刘厚林, 王纳秀,等.高温熔盐泵的模态计算与分析[J]. 流体机械, 2016, 44(3):45-49. GUO Bao,LIU Houlin,WANG Naxiu,et al. Modal ana-lysis of molten salt pump at high temperature[J]. Fluid machinery, 2016, 44(3):45-49.(in Chinese)[13]赵伟国.基于CFD的离心泵口环间隙流动研究[D].武汉:华中科技大学,2006.[14]吴大转,许斌杰,武鹏,等. 多级离心泵内部间隙流动与泄漏损失[J]. 浙江大学学报(工学版),2011,45(8):1393-1398. WU Dazhuan,XU Binjie,WU Peng,et al. Internal clea-rance flow and leakage loss in multistage centrifugal pump[J]. Journal of Zhejiang University(engineering science), 2011, 45(8):1393-1398.(in Chinese)[15]HIRANO T,GUO Zenglin, GORDON K R,et al. Application of computational fluid dynamics analysis for rotating machinery——part II: labyrinth seal analysis[J]. Journal of engineering for gas turbines and power, 2005, 127:820-826.[16]蒋庆磊,翟璐璐,吴大转,等. 多级离心泵内叶轮出口压力脉动研究[J]. 工程热物理学报,2012,33(4):599-602. JIANG Qinglei, ZHAI Lulu, WU Dazhuan, et al. Pressure fluctuation at impeller outlet in multistage pump[J]. Journal of engineering thermophysics,2012,33(4): 599-602.(in Chinese)[17]关醒凡. 现代泵理论与设计[M]. 北京:中国宇航出版社,2011.