Abstract： Based on CFD software Fluent,the flow field of a selfpriming centrifugal pump with deflector and jet nozzle was simulated numerically. The internal flow field variables such as velocity vector,static and total pressures were analyzed,and the pump efficiency was predicted.The numerical simulation showed that the velocity vector distribution in the pump is smooth,the static pressure distribution at the two outlets of the new type deflector is uniform and the pressure in each channel is close to an axisymmetric distribution.At the design point the pump head and efficiency predicted are higher than observations by 6.9% and 0.5%,respectively. The performance curve predicted is quite similar to that measured.The experimental results showed that the performance curve of the pump is flat andthe pump has an expanded high efficiency zone.The entire technical specifications of the pump have met the design requirements; also the efficiency is better by 16.34% than the imported pumps with the same specifications.To reduce weight and cost the pump casing is made of die casting aluminium alloy,causing the pump is featured with reasonable design,novel structure,small size,light weight,reliable operation and easy for use.
马栋棋. 新型自吸离心泵数值模拟及试验研究[J]. 排灌机械工程学报, 2011, 29(6): 483-486.
Ma Dongqi. Numerical simulation and experiment research on new type self priming centrifugal pump. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(6): 483-486.
［1］吕智军，兰才有，王福军.自吸离心泵研究现状及发展趋势［J］.排灌机械，2005,23(3)：1-5.Lü Zhijun,Lan Caiyou,Wang Fujun.The present status and development of selfpriming pump［J］.Drainage and Irrigation Machinery,2005,23(3):1-5.(in Chinese) ［2］郭晓梅,杨敏官,王春林.自吸离心泵现状分析［J］.水泵技术,2002(1):27-29.Guo Xiaomei,Yang Minguan,Wang Chunlin.Analysis of the present status of selfpriming pump［J］.Pump Technology,2002(1):27-29.(in Chinese) ［3］王春林,司艳雷,郑海霞,等.旋流自吸离心泵内部流场的数值模拟［J］.排灌机械,2008,26(2):31-35.Wang Chunlin,Si Yanlei,Zheng Haixia,et al.Numerical simulation of rotational interior flow in selfpriming pump［J］.Drainage and Irrigation Machinery, 2008,26(2):31-35.(in Chinese) ［4］王福军.计算流体动力学分析［M］.北京:清华大学出版社,2004:215-216. ［5］沈艳宁，袁寿其，陆伟刚，等.复合叶轮离心泵数值模拟正交试验设计方法［J］.农业机械学报，2010，41（9）：22-26.Shen Yanning,Yuan Shouqi,Lu Weigang,et al.Orthogonal test design method based on numerical simulation for nonoverload centrifugal pump with complex impeller［J］.Transactions of the Chinese Society for Agricultural Machinery, 2010,41(9):22-26.(in Chinese) ［6］苏起钦.射流式自吸离心泵性能数值模拟暨气液两相流分析［D］.江苏大学流体机械工程技术研究中心,2009. ［7］黄 思,吴玉林.叶片式离心泵内气液两相泡状流的三维数值计算［J］.水利学报,2001(6):57-61.Huang Si,Wu Yulin.3D calcucation of gasoil flow in rotodynamic pump based on a bubbly flow model［J］.Journal of Hydraulic Engineering,2001(6):57-61.(in Chinese)［8］Kang Can,Yang Minguan,Wu Xiaolian,et al.Characteristics of gasliquid transport flow through an axial flow impeller［C］∥Proceedings of the 2009 AsiaPacific Conference on Power and Energy Engineering，2009:1-4. ［9］Zhu Zuchao,Xie Peng,Ou Guofu,et al.Design and experimental analyses of smallflow highhead centrifugalvortex pump for gasliquid twophase mixture［J］.Chinese Journal of Chemical Engineering,2008,16(4):528-534.
