Abstract:In order to solve the problems of traditional piped hydraulic transportation, a new technique of energy conservation and environmental protection—the piped hydraulic transportation of tube contained raw material was put forward. The piped carriage was one of the key parts of the technique. By a combination of theoretical analysis and model experiments, the stressed characteristics of the piped carriages were analyzed and hydraulic characteristics of the transportation of different types of piped carriages in the pipe were researched. The research results show that the structural form of the piped carriage has a significant influence on the motion speed and transport energy consumption. The motion speed and transport energy consumption are the largest for the 150 mm×80 mm piped carriage, take the second place for the 100 mm×80 mm piped carriage, and are the smallest for the 150 mm×70 mm piped carriage. These conclusions can be used as reference for further improvement on the structure of the piped carriage.
李永业, 孙西欢, 李 飞, 王 锐. 不同型号的管道车在管道中运移的水力特性[J]. 排灌机械工程学报, 2010, 28(2): 174-178.
Li Yongye, Sun Xihuan, Li Fei, Wang Rui. Hydraulic characteristics of transportation of different piped carriages in pipe. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(2): 174-178.
[1]白晓宁,胡寿根,张道方,等. 固体物料管道水力输送的研究进展与应用[J].水动力学研究与进展,A辑,2001,16(3):303-311.Bai Xiaoning, Hu Shougen, Zhang Daofang, et al. Advances and applications of solid liquid two phase flow in pipeline hydrotransport[J]. Journal of Hydrodynamics, Ser A, 2001,16(3):303-311.(in Chinese)[2]Liu H, Marrero T R. Coal log pipeline technology:an overview[J]. Powder Technology, 1997,94(3):217-222.[3]Matouek V. Research developments in pipeline transport of settling slurries[J]. Powder Technology, 2005,156(1):43-51.[4]Liu H, Lin Y. Effect of exit shape of compaction mold on coal log quality[J]. Powder Technology, 1997,90(3):267-271.[5]Maciejewski W, Lord E, Gillies R, et al. Pipeline transport of large ablating particles in a non Newtonian carrier[J]. Powder Technology, 1997,94(3):223-228.[6]李永业,孙西欢,延耀兴.管道车不同荷重时筒装料管道水力输送特性[J].农业机械学报, 2008,39(12):93-96.Li Yongye, Sun Xihuan, Yan Yaoxing. Hydraulic chara cteristics of tube contained raw material hydraulic transportation under the different loads on the piped carriage[J]. Transactions of the Chinese Society for Agricultural Machinery, 2008,39(12):93-96. (in Chinese)[7]阎庆绂,李永业,孙西欢.离心泵入口侧管路中的涡流[J].排灌机械,2007,25(3):6-7.Yan Qingfu, Li Yongye, Sun Xihuan.The eddy current on the suction side of centrifugal pump[J]. Drainage and Irrigation Machinery, 2007,25(3):6-7. (in Chinese)[8]谈明高,刘厚林,袁寿其. 离心泵水力损失的计算[J].江苏大学学报:自然科学版,2007,28(5):405-408.Tan Minggao, Liu Houlin, Yuan Shouqi. Calculation of hydraulic loss in centrifugal pumps[J]. Journal of Jiangsu University: Natural Science Edition, 2007,28(5):405-408. (in Chinese)[9]童学卫,李永业,孙西欢.筒装料管道水力输送试验系统设计研究[J].山西水利,2008(2):42-43.Tong Xuewei, Li Yongye, Sun Xihuan. Experimental system design on the piped hydraulic transportation of tube contained raw material[J]. Shanxi Water Resources,2008(2):42-43. (in Chinese)[10]Deng Qingwen, Liu H. Analysis of coal log ram extrusion[J]. Powder Technology, 1997,91(1):31-41.