Rotor′s intensity analysis of eccentric and squirmy rotor pump based on ANSYS
Zhang Shengchang1, Wang Zonghuai1, Deng Hongying1, Liang Ning2
(1.Industrial Pump Research Institute, Zhejiang University of Technology, Hangzhou, Zhejiang 310014,China; 2.Zhejiang Hangzhou Drilling Machine Manufactory Co. Ltd.,Hangzhou, Zhejiang 310016,China)
Abstract:Based on the geometry and motion characteristics of hydraulic end in eccentric and squirmy rotor pump, the stress and restriction condition of rotor during the squirm process were analyzed. According to the design parameters of eccentric and squirmy rotor pump, the load and restriction condition at six operating points were calculated and analyzed. A three dimensional model of rotor was built based on ANSYS, and analyzed with hexahedral SWEEP mesh method. Furthermore, a numerical simulation for Polyoxymethylene(Pom) rotor′s intensity and stiffness was carried out by using quasi dynamic model method, and the stress and strain data of the rotor at six operating points were derived. The results of numerical simulation show that the maximum stress of the rotor with Pom material is far less than the allowable value, and both the stress and strain of the rotor meet the demands. The results provide a basis for reliability design of eccentric and squirmy rotor pump.
张生昌, 王宗槐, 邓鸿英, 梁 宁. 基于ANSYS的偏心蠕动式转子泵转子强度分析[J]. 排灌机械工程学报, 2010, 28(2): 132-135.
Zhang Shengchang, Wang Zonghuai, Deng Hongying, Liang Ning. Rotor′s intensity analysis of eccentric and squirmy rotor pump based on ANSYS. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(2): 132-135.
[1]张生昌,李 强.无泄漏环形隔膜泵的研制[J].流体机械,1994,22(7): 3-6.Zhang Shengchang,Li Qiang. Development of non leakage annular diaphragm pump[J]. Fluid Machinery,1994,22(7): 3-6. (in Chinese)[2]张生昌,郑英臣,林彬彬,等. 环形隔膜泵转子运动规律浅析[J]. 流体机械,2008,36(5):30-34.Zhang Shengchang, Zheng Yingchen, Lin Binbin, et al. Analysis on the rotor motion law for annular diaphragm pump[J]. Fluid Machinery, 2008,36(5):30-34.(in Chinese)[3]傅祥志. 机械原理[M]. 武汉:华中科技大学出版社,2000.[4]张庆元,陈如恒,蒲容春,等. 钻井泵机架的静动态有限元分析[J]. 石油学报,2000,21(2):83-87.Zhang Qingyuan,Chen Ruheng,Pu Rongchun, et al. Static and dynamic finite element analysis of drilling pump framework[J]. Acta Petrolei Sinica, 2000,21(2):83-87. (in Chinese)[5]袁丹青, 康仕彬, 丛小青,等. 直线共轭内啮合齿轮泵齿轮接触强度的有限元分析[J].排灌机械,2009,27(2):111-114.Yuan Danqing, Kang Shibin, Cong Xiaoqing, et al. Finite element analysis on gear tangency stress of straight conjugate internal gear[J]. Drainage and Irrigation Machinery,2009,27(2):111-114. (in Chinese)[6]Cui Qifeng, Liu Chengliang, Zha Xuan F. Study on a piezoelectric micropump for the controlled drug delivery system [J]. Microfluidics and Nanofluidics, 2007,3(4):66-69.[7]Peter H C, Raymond P V, Robert W T. Characterizing intramural stress and inflammation in hypertensive arte rial bifurcations[J]. Biomechanics and Modeling in Mechanobiology,2007,36(11):24-30.[8]Helmut Keck,Mirjam Sick.Thirty years of numerical flow simulation in hydraulic turbomachines[J]. Acta Mechanica, 2008,126(12):1-4.