Abstract： Aiming at the alkali pump works in a strong corrosion condition and low efficiency ,a design method with dual “S” impeller was proposed． By using the enlarged flow rate coefficient method，the effects of geometry parameters of the impeller on passing performance and efficiency were analyzed and the hydraulic design method was introduced．The results show that the dual “S” impeller is benefit for transporting viscous medium．Adopting nickel base alloy, its metallographic structure is austenite，named HS-1, assures the anti corrosion performance and reduces the cost of the pump. According to process engineering requirements，a single stage cantilever structure was used and the system’s stability was improved. The test result shows that the dual “S” impeller of alkali pump has a steady Q-H curve．In addition，the actual head is 52．3 m and the flow rate is 4 m3/h，the efficiency of the pump is 16.18%．All the technical parameters are satisfied for the design requirements and achieves localization of the alkali pumps．It is useful for the design of mini flow and low specific speed pump used in transporting high temperature, strong corrosion and viscous medium．
宫恩祥, 黄铭科, 张 丽, 刘三华, 杨 巍. 背开式双“S”形叶轮碱泵的设计与试验[J]. 排灌机械工程学报, 2010, 28(2): 136-139.
Gong Enxiang, Huang Mingke, Zhang Li, Liu Sanhua, Yang Wei. Design and experiment of alkali pump with back open dual “S” impeller. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(2): 136-139.
[1]魏宗胜．氯碱和纯碱工业用泵[J]．化工设备设计，1994（6）：29-39．Wei Zongsheng. Chlor alkali and soda ash industry pumps[J]. Chemical Equipment Design,1994(6)：29-39．(in Chinese)[2]Thomas F O′Brien, Tilak V Bommaraju, Fumio Hine. Overview of the Chlor Alkali Industry[M]// Handbook of Chlor Alkali Technology:Volume I. New York:Springer US,2005:37-74．[3]牟介刚，李思，郑水华，等.离心泵叶轮出口盖板形状对水力性能的影响[J].排灌机械，2009，27（5）：323-326.Mou Jiegang，Li Si，Zheng Shuihua，et al. Relationship between hydraulic performance of centrifugal pump and shape of impeller shroud[J]. Drainage and Irrigation Machinery，2009，27(5)：323-326.(in Chinese)[4]李涛，尚家巨，郝宁. 星形叶轮的特点及其特性分析[J]．通用机械,2007，6(7)：70，94．Li Tao，Shang Jiaju，Hao Ning. The characteristics and analysis of star like impeller[J]. General Machinery,2007，6(7)：70,94．(in Chinese)[5]袁寿其，曹武陵，金树德，等．低比转速离心泵的理论与设计[J]．排灌机械，1992，10(3)：29-36．Yuan Shouqi，Cao Wuling，Jin Shude，et al. The theory and design of low specific speed centrifugal pump[J]. Drainage and Irrigation Machinery，1992，10(3)：29-36.(in Chinese)[6]倪永燕，袁寿其，袁建平，等.低比转速离心泵加大流量设计模型[J]．排灌机械，2008，26(1)：21-24．Ni Yongyan，Yuan Shouqi，Yuan Jianping， et al. Model of enlarged flow design for low specific speed centrifugal pump[J]. Drainage and Irrigation Machinery，2008，26(1)：21-24．(in Chinese)[7]Tuzson J. Centrifugal Pumps Design[M]. New York：John Wiley & Sons Inc，2000．[8]Standard Specifi cation for Castings，Nickel and Nickel Alloy[S]．ASTM,2003.
