Numerical prediction of critical cavitation number in pump-turbine
Hao Zongrui1, Liu Jintao2, Wang Leqin2
1.Institute of Oceanographic Instrument, Shandong Academy of Science, Qingdao, Shandong 266001, China; 2.Institute of Process Equipment, Zhejiang University, Hangzhou, Zhejiang 310027, China
Abstract:The hydraulic performance and internal flow in a pump-turbine model were analyzed under different cavitation numbers to study effects of the coefficient on unsteady flow in the model by using the SST k-ω turbulence model. The results show that cavitation number can alter the flow pattern in the pump-turbine and the critical cavitation number reflects the energy performance of a pump-turbine. The head of pump-turbine decreases and the efficiency rises at cavitation inception; with development of the cavitation, the head increases considerably, while the efficiency decreases quickly. The cavities are located at the blade suction side near the runner outlet and ring. The change of cavitation number has less effect on the instability of flow in the pump-turbine runner only. If cavitation number is larger, the head of pump-turbine will remain unchanged essentially. Moreover, the head decreases slightly with decreasing cavitation number when cavitation number is in the range of 0.075-0.150. However, the head increases with decreasing cavitation number as the coefficient is less than 0.075.
郝宗睿, 刘锦涛, 王乐勤. 水泵水轮机临界空化系数的数值预测[J]. 排灌机械工程学报, 2013, 31(9): 774-777.
Hao Zongrui, Liu Jintao, Wang Leqin. Numerical prediction of critical cavitation number in pump-turbine. Journal of Drainage and Irrigation Machinery Engin, 2013, 31(9): 774-777.
[1]梅祖彦. 抽水蓄能发电技术[M]. 北京:机械工业出版社, 2000:200-221.[2]徐洪泉,张强,王海涛,等. 利用临界空化系数精确确定水轮机出力[J]. 水利水电技术, 2005,36(6):85-88. Xu Hongquan, Zhang Qiang, Wang Haitao,et al. Accurate confirmation of hydro-turbine output with critical cavitation number[J]. Water Resources and Hydropo-wer Engineering, 2005,36(6):85-88.(in Chinese)[3]徐洪泉, 王万鹏. 水轮机空化系数及其对水力性能的影响[J]. 大电机技术, 2010(5):44-47,59. Xu Hongquan, Wang Wanpeng. cavitation number of a hydraulic turbine and its effect on performance[J]. Large Electric Machine and Hydraulic Turbine, 2010(5):44-47,59.(in Chinese)[4]赵越,刘智良,郭全宝. 确定模型水泵水轮机水泵工况叶片初生空化的声学方法研究[J]. 大电机技术2011(1):39-45. Zhao Yue, Liu Zhiliang, Guo Quanbao, An acoustic method of judging inception cavitation on runner blade of model pump turbine at pump condition[J]. Large Electric Machine and Hydraulic Turbine,2011(1):39-45.(in Chinese)[5]张梁. 混流式水轮机两相空化流数值模拟及涡动力学分析[D].北京: 清华大学热能工程系, 2007.[6]Paladino E E,Lima J A,Pessoa P A S, et al. A computational model for the flow within rigid stator progressing cavity pumps[J]. Journal of Petroleum Science and Engineering, 2011, 78(1): 178-192.[7]Xiang M, Cheung S C P, Tu J Y,et al. Numerical research on drag reduction by ventilated partial cavity based on two-fluid model[J]. Ocean Engineering, 2011, 38(17/18):2023-2032.[8]Liu Jintao, Liu Shuhong, Wu Yulin, et al. Numerical investigation of the hump characteristic of a pump-turbine based on an improved cavitation model[J]. Computers and Fluids, 2012,68:105-111.[9]Wu Yulin, Liu Shuhong, Dou Huashu, Numerical prediction and similarity study of pressure fluctuation in a prototype Kaplan turbine and the model turbine[J]. Computers and Fluids, 2012, 56:128-142.[10]Chen Gang, Liu Shuhong, Cao Guangjun. Unsteady cavitation simulation in transient process of turbine flow meter[J]. Modern Physics Letters B, 2010, 24(13): 1503-1506.[11]Rayleigh L. 1916, On the dynamics of revolving fluid[J]. Proceedings of the Royal Society of London,Ser A,1916,93(648):148-154.[12]刘德民.基于空化计算的混流式水轮机叶道涡和尾水涡数值分析[D]. 北京:清华大学热能工程系, 2011.