Effects of blade leading edge position on hydraulic performances of centrifugal pump
ZHAO Wanyong1*,GUO Qiang1,2
1. School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China; 2. Key Laboratory of Fluid Machinery and System, Gansu Province, Lanzhou, Gansu 730050, China
Abstract:In order to study effects of blade leading edge position on centrifugal pump performance and internal flow field characteristics, five impellers with different blade leading edge positions were designed based on the original impeller of a centrifugal pump, and three-dimensional steady flow fields in the entire flow passage of the pumps with these impellers were carried out based on the SST k-ω and Zwart cavitation models under water single-phase as well as water-sand two-phase flow conditions. The results demonstrate that the suction performance of the centrifugal pump can be improved when the blade leading edge position is moved towards the impeller eye. The reason for this is that for a low specific-speed centrifugal pump its blade leading edge position being moved towards the impeller eye can improve flow conditions, such as flow uniformization, fluid velocity decrease and pressure rise in the impeller inlet. When the edge position is altered in a certain range, the head and efficiency of the pump are affected little. However, if the edge position is extended too much to the impeller eye, the head will be declined considerably because the blades are subject to the impaired capacity of doing work. At the same flow rate, the increase of sand content can degrade the head and efficiency of the pump but also augment the number of cavitation nuclei, thus make the suction performance poor.
赵万勇*, 郭强,. 叶片进口边位置对离心泵性能的影响[J]. 排灌机械工程学报, 2019, 37(7): 568-573.
ZHAO Wanyong*,GUO Qiang,. Effects of blade leading edge position on hydraulic performances of centrifugal pump. Journal of Drainage and Irrigation Machinery Engin, 2019, 37(7): 568-573.
[1]赵万勇. 离心泵叶轮汽蚀与泥沙磨损破坏浅析[J]. 兰州理工大学学报, 2000, 26(1):58-62. ZHAO Wanyong. Elementary analysis of centrifugal pump impeller destruction due to cavitation and sand abrasion[J]. Journal of Lanzhou University of Technology, 2000, 26(1):58-62.(in Chinese)[2]赵万勇, 赵爽. 离心泵叶片设计经验系数取值范围分析[J]. 流体机械, 2012, 40(4): 31-34. ZHAO Wanyong, ZHAO Shuang. Analysis of empirical coefficient scope to the design of blade in centrifugal pump[J]. Fluid machinery, 2012, 40(4): 31-34.(in Chinese)[3]罗先武, 张瑶, 彭俊奇, 等. 叶轮进口几何参数对离心泵空化性能的影响[J]. 清华大学学报(自然科学版), 2008, 48(5): 836-839. LUO Xianwu, ZHANG Yao, PENG Junqi, et al. Effect of impeller inlet geometry on centrifugal pump cavitation performance [J]. Journal of Tsinghua University(natio-nal science edition), 2008, 48(5): 836-839.(in Chinese)[4]邓育轩, 纪燕飞, 何立东, 等. 螺旋离心泵内不稳定漩涡空化对出口压力的影响[J]. 流体机械, 2017,45(8):43-47. DENG Yuxuan, JI Yanfei, HE Lidong, et al. Influence of unsteady vortex cavitation on pump outlet pressure in a screw centrifugal pump [J]. Fluid machinery, 2017,45(8):43-47.(in Chinese)[5]陈汇龙, 刘志斌, 刘彤, 等. 基于空化的机械密封槽腔耦合方式研究[J]. 江苏大学学报(自然科学版), 2015, 36(1):43-47. CHEN Huilong, LIU Zhibin, LIU Tong, et al. Research on coupling style of mechanical seal with spiral groove and micro-pores based on cavitation[J]. Journal of Jiangsu University(natural science edition), 2015, 36(1):43-47.(in Chinese)[6]李仁年, 陈昊, 韩伟, 等. 大颗粒下螺旋离心泵内运动特性数值模拟与分析[J]. 流体机械, 2016, 44(7):18-21. LI Rennian, CHEN Hao, HAN Wei, et al. Numerical simulation and analysis of particle motion trajectory in the screw centrifugal pump with large particles[J]. Fluid machinery, 2016, 44(7):18-21.(in Chinese)[7]程效锐, 董富弟, 杨从新,等. 基于颗粒摩擦和碰撞模型的离心泵叶片磨损预测[J]. 兰州理工大学学报, 2015, 41(2):55-60. CHENG Xiaorui, DONG Fudi, YANG Congxin, et al. Wear prediction of centrifugal pump blade based on particle friction and collision model[J]. Journal of Lanzhou University of Technology, 2015, 41(2):55-60.(in Chinese)[8]李文锋, 冯建军, 朱国俊,等. 基于CFD的固液两相离心泵内部流动及磨蚀特性研究[J]. 西安理工大学学报, 2017, 33(1):46-52. LI Wenfeng, FENG Jianjun, ZHU Guojun, et al. Investigation in internal flow and abrasion characteristics of solid-liquid two-phase centrifugal pump base on CFD[J] Journal of Xi′an University of Technology, 2017, 33(1):46-52.(in Chinese)[9]MADADNIA J, OWEN I. Accelerated surface erosion by cavitating particulate-laden flows[J]. Wear, 1993, 165(1): 113-116.[10]MADADNIA J, OWEN I. Erosion in conical diffusers in particulate-laden cavitating flows[J]. International jou-rnal of multiphase flow, 1995, 21(6):1253-1257.[11]BENNIA A, LOUKARFI L, KHELIL A, et al. Contribution to the experimental and numerical dynamic study of a turbulent jet sssued from lobed diffuser[J]. Journal of applied fluid mechanics, 2016, 9(6): 2957-2967.[12]赵伟国, 韩向东, 李仁年,等. 沙粒粒径与含沙量对离心泵空化特性的影响[J]. 农业工程学报, 2017, 33(4):117-124. ZHAO Weiguo, HAN Xiangdong, LI Rennian, et al. Effects of silt diameter and silt concentration on cavi-tation flow in centrifugal pump[J]. Transactions of the CSAE, 2017, 33(4):117-124.(in Chinese)[13]CHENG H, LONG X, BIN J I, et al. Numerical investigation of unsteady cavitating turbulent flows around twi-sted hydrofoil from the Lagrangian viewpoint[J]. Journal of hydrodynamics, Ser. B, 2016, 28(4): 709-712.[14]王松林, 谭磊, 王玉川. 离心泵蜗壳内非定常流动特性[J]. 振动与冲击, 2014, 33(11):43-48. WANG Songlin, TAN Lei, WANG Yuchuan, et al. Characteristics of unsteady flow in a centrifugal pump volute[J]. Journal of vibration and shock, 2014, 33(11):43-48.(in Chinese)