Effect of tip clearance on unsteady flow in axial-flow pump
Li Yaojun1, Shen Jinfeng1, Hong Yiping1, Tang Xuelin1, Zhang Zhimin2
1.College of Water Resources & Civil Engineering, China Agricultural University, Beijing 100083, China; 2.China Institute of Water Resources and Hydropower Research, Beijing 100044, China
Abstract:In order to study the influence of the tip clearance on the unsteady flow and performance of the axial-flow pump, adopting the Spalart-Allmaras model based detached eddy simulation(DES)method and sliding mesh technique, numerical simulations of internal turbine flow of the axial-flow pump under designed conditions were carried out. The internal unsteady flow and its pressure pulsations of four different tip clearance sizes were simulated and analyzed. With the designed tip clearance, the predicted pump head and efficiency matched well with the measured data, and the maximum relative errors were less than 2.0% and 3.0%, respectively. The numerical results show that the pump performance, especially the head and efficiency tend to decrease as tip clearance becomes bigger; the intensity and range of the tip clearance vortex increase as the tip gap grows. When the gap reaches 3.3‰D2, the tip clearance vortex expands to the trailing edge of the neighboring blade. The results also show that the blade passing frequency dominated the pressure fluctuations in the impeller. The increase of the blade tip gap led to a reduction of the maximum pressure fluctuation amplitude on the front part of the impeller casing, but an increase on the middle part of the impeller casing. Pressure fluctuations in the impeller-vane gap region are dominated by the blade passing frequency(fn), while the maximum pressure fluctuation amplitude was observed to decrease as the tip clearance size increases.
黎耀军, 沈金峰, 洪益平, 唐学林, 张志民. 轮缘间隙对轴流泵内部非定常流场的影响[J]. 排灌机械工程学报, 2013, 31(8): 667-673.
Li Yaojun, Shen Jinfeng, Hong Yiping, Tang Xuelin, Zhang Zhimin. Effect of tip clearance on unsteady flow in axial-flow pump. Journal of Drainage and Irrigation Machinery Engin, 2013, 31(8): 667-673.
[1]Inoue M, Furukawa M. Physics of tip clearance flow in turbomachinery[J]. American Society of Mechanical Engineers, 2002, 257(2B):777-789.[2]Wu H, Tan D, Miorini R L, et al. Three-dimensional flow structures and associated turbulence in the tip region of a waterjet pump rotor blade[J]. Experiments in Fluids, 2011, 51(6):1721-1737.[3]郑源, 刘君, 周大庆, 等. 大型轴流泵装置模型试验的压力脉动[J]. 排灌机械工程学报, 2010, 28(1):51-55. Zheng Yuan, Liu Jun, Zhou Daqing, et al. Pressure pulsation of model test in large-size axial-flow pump[J].Journal of Drainage and Irrigation Machinery Engineering, 2010,28(1):51-55.(in Chinese)[4]王福军, 张玲, 张志民. 轴流泵不稳定流场的压力脉动特性研究[J]. 水利学报, 2007, 38(8):1003-1009. Wang Fujun, Zhang Ling, Zhang Zhimin. Analysis on pressure fluctuation of unsteady flow in axial-flow pump[J]. Journal of Hydraulic Engineering,2007, 38(8):1003-1009.(in Chinese)[5]施卫东, 冷洪飞, 张德胜, 等. 轴流泵内部流场压力脉动性能预测与试验[J]. 农业机械学报, 2011, 42(5):44-48. Shi Weidong, Leng Hongfei, Zhang Desheng, et al. Performance prediction and experiment for pressure fluctuation of interior flow in axial-flow pump[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(5):44-48.(in Chinese)[6]张德胜, 施卫东, 李通通, 等. 轴流泵叶轮出口尾迹区非定常压力和速度场特性[J]. 农业工程学报, 2012, 28(17):32-37. Zhang Desheng, Shi Weidong, Li Tongtong, et al. Property of unsteady pressure and meridional velocity in wake region of axial-flow pump impeller[J]. Transactions of the CSAE, 2012, 28(17): 32-37.(in Chinese)[7]Nagahara T, Inoue Y, Sato T, et al. Investigation of the flow field in a multistage pump by using LES[C]//Proceedings of the ASME Fluids Engineering Division Summer Meeting. Houston, USA: ASME, 2005: 1321-l329.[8]王福军, 张玲, 黎耀军, 等. 轴流式水泵非定常湍流数值模拟的若干关键问题[J]. 机械工程学报, 2008, 44(8):73-77. Wang Fujun, Zhang Ling, Li Yaojun,et al. Some key issues of unsteady turbulent numerical simulation in axial-flow pump[J]. Chinese Journal of Mechanical Engineering, 2008, 44(8):73-77.(in Chinese)[9]Mion P, Wang M, You D, et al. Large-eddy simulation of rotor tip-clearance flows: Computational challenges and accomplishments[C]//Proceedings of the HPCMP Users Group Conference 2005. TN,United States:[s.n.],2005: 134-141.[10]Spalart P R,Jou W H,Strelets M,et al.Comments on the feasibility of LES for wings,and on a hybird RANS/LES approach[C]//Proceedings of 1st AFOSR International Conference on DNS/LES.Louisiana,USA:Greyden Press,1997:4-8.[11]张宇宁, 刘树红, 吴玉林. 混流式水轮机压力脉动精细模拟和分析[J]. 水力发电学报, 2009, 28(1):183-186. Zhang Yuning, Liu Shuhong, Wu Yulin. Detailed simulation and analysis of pressure fluctuation in Francis turbine[J]. Journal of Hydroelectric Engineering, 2009, 28(1):183-186.(in Chinese)[12]Lucius A, Brenner G. Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation[J]. International Journal of Heat and Fluid Flow,2010, 31(6): 1113-1118.[13]尹俊连, 刘锦涛, 王乐勤, 等. 水泵水轮机泵工况小流量区压力脉动预测[J]. 工程热物理学报, 2011, 32(7):1141-1144. Yin Junlian, Liu Jintao, Wang Leqin, et al. Prediction of pressure fluctuations of pump turbine under off-design condition in pump mode[J]. Journal of Engineering Thermophysics, 2011, 32(7):1141-1144.(in Chinese)[14]中国农业机械化科学研究院. 轴流泵试验报告[R]. 北京:中国农业机械化科学研究院, 2005.[15]Spalart P R, Allmaras S R. A One-equation Turbulence Model for Aerodynamic Flows[R]. Seattle:Boeing Commercial Airplane Group, 1992.[16]Ferziger J H, Peric M. Computational Methods for Fluid Dynamics[M]. 3rd ed. Berlin: Springer-Verlag, 2002.