Abstract:The performance of centrifugal pumps can be improved through filing blade outlet when the head is slightly lower than the actual demand.After filing the impeller of a single-stage single-suction centrifugal pump, the head and efficiency rise by 9.8% and 6.7% respectively. The unsteady nume-rical simulation of whole flow field of the pump was executed at design condition with CFX software, and the change of the flow field was analyzed. Based on ANSYS Workbench, the one-way fluid-structure interaction of impeller was calculated and the effect of filing blade outlet on impeller strength was analyzed. Results show that, the increase of absolute velocity and the decrease of relative velocity can make the head increased after filing. The adverse pressure gradient on blade outlet edge with filed blades decreases obviously, preventing the separation of boundary layer. The losses of friction and se-paration are decreased, so the efficiency is improved. Impeller maximum equivalent stress changes with the phase after filing blade outlet. But the impeller maximum total deformation is greater than original impeller at every phase.The research provides a reliable method for improving flow field of centrifugal pump.
白羽, 刘厚林, 董亮, 刘永付, 王宝勤, 唐晓晨. 修锉叶片出口对离心泵内流场及叶轮强度的影响[J]. 排灌机械工程学报, 2014, 32(10): 852-857.
Bai Yu, Liu Houlin, Dong Liang, Liu Yongfu, Wang Baoqin, Tang Xiaochen. Effect of filing blade outlet on centrifugal pump flow field and impeller strength. Journal of Drainage and Irrigation Machinery Engin, 2014, 32(10): 852-857.
[1]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2011.[2]杨敏官,孙鑫恺,高波,等. 离心泵内部非定常空化流动特征的数值分析[J]. 江苏大学学报:自然科学版, 2012, 33(4):408-413. Yang Minguan,Sun Xinkai,Gao Bo,et al. Numerical analysis of unsteady cavitating flow characteristic in centrifugal pump[J]. Journal of Jiangsu University: Natural Science Edition, 2012, 33(4):408-413.(in Chinese)[3]谈明高,王勇,刘厚林,等. 叶片数对离心泵内流诱导振动噪声的影响[J]. 排灌机械工程学报, 2012, 30(2): 131-135. Tan Minggao,Wang Yong,Liu Houlin, et al. Effects of number of blades on flow induced vibration and noise of centrifugal pumps[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012, 30(2): 131-135.(in Chinese)[4]Turton R K. Principles of Turbomachinery[M]. London: Chapman and Hall,1994.[5]董亮, 刘厚林, 谈明高, 等. 离心泵全流场与非全流场数值计算[J]. 排灌机械工程学报, 2012, 30(3): 274-278. Dong Liang,Liu Houlin,Tan Minggao,et al. Numerical calculation of whole and non-whole flow field in centrifugal pumps [J]. Journal of Drainage and Irrigation Machinery Engineering,2012, 30(3):274-278.(in Chinese)[6]王福军.计算流体力学分析[M].北京:清华大学出版社,2004.[7]孔繁余,王婷,王文廷,等. 基于流固耦合的高温泵叶轮应力有限元分析[J]. 江苏大学学报:自然科学版,2012,33(3):269-273. Kong Fanyu,Wang Ting,Wang Wenting,et al. Finite element analysis of high temperature pump impeller stress based on fluid-solid coupling [J]. Journal of Jiangsu University:Natural Science Edition,2012,33(3):269-273.(in Chinese)[8]舒敏骅,刘厚林,谈明高,等. 不同比转数离心泵设计工况下湍流模型的适用性研究[J].中国农村水利水电,2011(2):142-145. Shu Minhua,Liu Houlin,Tan Minggao,et al. Research on the application of turbulence models to the design of centrifugal pumps [J]. China Rural Water and Hydropower,2011(2):142-145.(in Chinese)[9]张克危. 流体机械原理(上册)[M].北京:机械工业出版社,2000.[10]袁寿其. 低比速离心泵理论与设计[M].北京:机械工业出版社,1997.