Abstract:Based on the analysis of the physical model of the impeller of roto-jet pump, the analytical mathematics model of internal flow within the impeller is set up. By exploiting software, analysis of three-dimensional potential flow within the impeller of roto-jet pump is carried out, and the theoretical head obtained by impeller is calculated. At the same time, the commercial software Fluent was applied to calculate the internal flow. Compared with the results obtained by above two methods, the method is proved to be feasible.
邹雪莲;陈红勋. 旋喷泵叶轮内部流动的全三维数值模拟[J]. 排灌机械工程学报, 2004, 22(2): 1-4.
ZOU Xue-lian, CHEN Hong-xun. Three-Dimensional Numerical Simulation of Internal Flow Within the Impeller Of Roto-Jet Pump. Journal of Drainage and Irrigation Machinery Engin, 2004, 22(2): 1-4.
[1] GALNES.Flushing Media Pumps Stops Costly Downtime Due to Seal Failure[J].Chemical Processing,1980,43(2):32[2] 杨军虎,马希金.旋喷泵叶轮内的准三元流动计算[J].甘肃工业大学学报,1994(1):48-53[3] 杨军虎,齐学义.旋喷泵的效率及集流管水力设计方法探讨[J].化工机械,1996,23(2):91-93[4] Steve Osbom.The Roto-Jet pump: 25 years new[J].World Pumps,1996(12):32-35[5] 王成木,黎成行,尹晓.旋喷泵水力性能的实验研究[J].水泵技术,2000(5):3-7[6] 齐学义,杨军虎,刘在伦.旋喷泵设计参数的分析讨论[J].流体机械,1999,27(10):19-21[7] 王元淳.边界元法基础[M].上海:上海交通大学出版社,1988