Development and application of a new differential pressure flow-meter
Li Yanjun1,Yan Dengfeng2
(1.Technical and Research Center of Fluid Machinery Engineering of Jiangsu,Zhenjiang,Jiangsu 212013,China;2.Yangzhou University,Yangzhou,Jiangsu 225009,China)
Abstract: A new differential pressure flow-meter is developed by using the theory of flow around a circular cylinder.The special designed cylinder tube is used to obtain fluid pressure in the flow-meter.By measuring the fluid pressure difference between the total pressure hole against the flow and the side hole at specified angles,the point velocities and the average flow rate of cross-section are determined.In a certain range of flow angle around the cylinder tube,the flow pressure coefficient does not change with the Reynolds number,so the new flow-meter can be calibrated outside conduit but not in situ.The application is convenient and reliable,and the system uncertainty can be controlled within ±1.0%.The new flow-meters are applied to the single-pump flow test at the scene of No.1 and No.3 unit of Xietai Pumping Station in South-North Water Transfer East Route Project.The errors between the results of field test and conversion from model test were within 0.78 m3/s.The cylinder tubes of the flow-meters were inserted into the suction chamber before the pump impeller,and the flow measurement of large pump was achieved on the condition of no straight pipes.
李彦军, 严登丰. 一种新型差压流速流量计的研制与应用[J]. 排灌机械工程学报, 2009, 27(4): 251-254.
Li Yanjun1,Yan Dengfeng2. Development and application of a new differential pressure flow-meter. Journal of Drainage and Irrigation Machinery Engin, 2009, 27(4): 251-254.
[1]李建威.水力机械测试技术[M].北京:机械工业出版社,1981.[2]仇宝云,刘超,汤方平,等.探针测量大型水泵流量研究[J].农业机械学报,2004,35(4):66-69.Qiu Baoyun,Liu Chao,Tang Fangping,et al.Flowrate measurement of large pumps by probe system[J].Transactions of the Chinese Society for Agricultural Machinery,2004,35(4):66-69.(in Chinese)[3]周济人,杨华,成立,等.超声波流量计测试大型低扬程泵站流量的模型试验[J].排灌机械,2009,27(1):51-54.Zhou Jiren,Yang Hua,Cheng Li,et al.Experimental study on pump discharge measurement for large-scale and low-lift pumping station by using ultrasonic flowmeter[J].Drainage and Irrigation Machinery,2009,27(1):51-54.(in Chinese)[4]Zheng Y,Zhao ZY,Fan BQ,et al.Technique on flow measurement and its application in low head and large discharge pump stations[C]∥Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Confe-rence.NewYork:AMER SOC Mechanical Engineers,2007,2:85-90.[5]White F M.Fluid Mechanics[M].6th ed.New York:McGraw-Hill,2006.[6]ISO 3354:2008 Measurement of clean water flow in closed conduits-Velocity-area method using current-meters in full conduits and under regular flow conditions[S].