Abstract：To investigate the diffluence ratio and internal flow characteristics of a three-way control valve, the SIMPLE algorithm was used to simulate the internal flow field by using the standard k-ε turbulence model. By changing the inlet flow rate and the rotational angle of valve core, the internal flow characteristics and the diffluence ratio variation laws were studied. The simulated and experimental results are in good agreement each other. The results show that the valve can shunt effectively when the rotational angle varies from 15° to 75°. With increasing angle, the horizontal diffluence ratio increases at first to 0.55 at 35°, then decreases to 0.40 at 55°, finally keeps increasing to 1.00. This variation tendency agrees with the change in the ratio of the horizontal outflow area to the total outflow area. With increasing angle, the inlet pressure increases firstly and then decreases but reaches the peak at about 45°, the pressure curves are generally symmetrical about 45° line. This change tendency is consistent with the entrance flow area of the regulating part. The flow area contracts in the connection part between the inlet and the core, and the throttling leads to the highest flow velocity there and the highest pressure at the entrance.
孙彩珍,李红*,汤攀. 三通调节阀分流比及内部流动特性分析[J]. 排灌机械工程学报, 2019, 37(5): 441-446.
SUN Caizhen, LI Hong*, TANG Pan. Analysis of diffluence ratio and internal flow characteristics of three-way control valve. Journal of Drainage and Irrigation Machinery Engin, 2019, 37(5): 441-446.
[1]綦建前. 阀门分类方法的探讨[J]. 阀门,2000(5):35-37. QI Jianqian. Discussion on valve classification [J].Valve,2000(5):35-37.(in Chinese)[2]MANAGEMENT E P. Control Valve Handbook[M].[S.L.]: Fisher Controls International LLC, 2005.[3]MOUJAES S F, JAGAN R. 3D CFD predictions and experimental comparisons of pressure drop in a ball valve at different partial openings in turbulent flow[J]. Journal of energy engineering, 2008, 134(1):24-28.[4]姚晓春.V形调节球阀的数值模拟及结构优化[D].兰州:兰州理工大学,2009.[5]张生昌,张玉林,方志明,等. 基于CFD 的球阀三维流场数值模拟[J]. 排灌机械工程学报,2013,31(2):157-161. ZHANG Shengchang,ZHANG Yulin,FANG Zhiming,et al.3D flow numerical simulation of ball valve based on CFD[J].Journal of drainage and irrigation machinery engineering,2013,31(2):157-161.(in Chinese)[6]王虎斌. 基于遗传算法的三通调节球阀节流盘型线优化研究[D].兰州:兰州理工大学,2016.[7]成雷. 三通除焦阀的结构设计及流体计算[J]. 石油化工设备技术,2011,32(6):27-29. CHENG Lei.Structure design and hydraulic calculation of hydraulic decoking three-way valve[J].Petro-chemical equipment technology,2011,32(6):27-29.(in Chinese)[8]王渭,陈凤官,明友,等. 水力除焦三通阀流道结构的CFD 分析[J]. 流体机械,2012,40(11):25-28. WANG Wei,CHEN Fengguan,MING You,et al. CFD analysis of the flow channel structure for hydraulic decoking three-way valve[J].Fluid machinery,2012,40(11):25-28.(in Chinese)[9]王渭,杨善文,陈凤官,等. 水力除焦三通阀阀芯改造对水泵出口压力的影响[J].流体机械,2013,41(12):48-53. WANG Wei,YANG Shanwen,CHEN Fengguan,et al. Effect of trim modification of hydraulic decoking three-way valve on the pump-outlet pressure[J].Fluid machinery,2013,41(12):48-53.(in Chinese)[10]朱钰. 具有圆形阀口的三通滑阀的静态特性分析[J]. 集美大学学报自然科学版,2008(4):33-36. ZHU Yu.Steady-state flow characteristics analysis of three-way spool valve with circular port[J].Journal of Jimei University(natural science),2008(4):33-36.(in Chinese)
