Hydrodynamic characteristics of shaft-less waterjet pump
Liu Ruihua1, Cao Puyu2, Wang Yang2, Ning Chao2
1.Jiangsu Electric Power Construction No.3 Engineering Company, China Energy Engineering Group Co. Ltd., Zhenjiang, Jiangsu 212013, China; 2.National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China
Abstract:A design concept of shaft-less waterjet propulsion pump is put forward to improve the hydrodynamic performance of existing SDPM-450 waterjet pump. In such a design, a gear transmission system replaces the conventional belt-shaft transmission to drive the pump impeller. Since the upstream shaft has been removed, its disturbance on the flow field in the inlet conduct is avoided. The hydrodynamic performances of the shaft-less waterjet pump and the conventional one are predicted by using CFD code under ship high speed conditions. The hydrodynamic characteristics are clarified based on theoretical analysis, internal flow field and propulsion performance. A theoretical analysis shows that the flow rate discharged by the pump and the capability of doing work of the pump are improved. As a result, the shaft-less pump is subject to 20% more thrust and 15% more efficiency compared with the conventional pump. Based on flow field analysis, the shaft-less pump presents a shrunk wake and a reduced inflow loss. The propulsion performance analysis reveals that the shaft-less pump can work more efficiently at a high speed, causing a 3-5knot increment in the sip speed in average.
刘瑞华, 曹璞钰, 王洋, 宁超. 无轴式喷水推进泵的水动力特性[J]. 排灌机械工程学报, 2015, 33(5): 380-386.
Liu Ruihua, Cao Puyu, Wang Yang, Ning Chao. Hydrodynamic characteristics of shaft-less waterjet pump. Journal of Drainage and Irrigation Machinery Engin, 2015, 33(5): 380-386.
[1]Bulten. A breakthrough in waterjet propulsion systems[C]//Proceedings of the International Maritime Defence Exhibition and Conference. Doha, Qatar: DIMDEX, 2008.[2]Verbeek R. Recent development in waterjet design[C]//Proceedings of the International Conference on Water-jet Propulsion——II:Amsterdam, 1998.[3]Tervisga V. The effect of waterjet-hull interaction on thrust and propulsion efficiency[C]//Proceedings of the International Conference on Fast Sea Transportation Conference. Trondheim, Norway:[s.n.], 1991.[4]常书平,王永生,庞之洋,等. 喷水推进器进水流道内流场数值模拟与分析[J]. 武汉理工大学学报:交通科学与工程版,2010,34(1):47-51. Chang Shuping, Wang Yongsheng, Pang Zhiyang, et al. Numerical simulation and analysis of fluid Flow in inlet of waterjet propulsion[J]. Journal of Wuhan University of Technology:Transportation Science and Engineering, 2010, 34(1): 47-51.(in Chinese)[5]常书平,王永生. 基于CFD的混流泵空化特性研究[J]. 排灌机械工程学报,2012,30(2):171-175. Chang Shuping, Wang Yongsheng. Cavitation perfor-mance research of mixed flow pump based on CFD[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012, 30(2): 171-175.(in Chinese)[6]常书平,王永生,苏永生. 若干因素对导叶式混流泵水力性能的影响[J]. 排灌机械工程学报,2012,30(6):646-649. Chang Shuping, Wang Yongsheng, Su Yongsheng. Effects of some factors on hydraulic performance of mixed flow pump with guide vanes[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012, 30(6): 646-649.(in Chinese)[7]Bulten. Numerical analysis of waterjet propulsion system[D]. Eindhoven: Department of Mechanical Engineeri-ng, Technical University of Eindhoven, 2006.[8]魏应三,王永生. 喷水推进器进水流道不均匀度统一描述[J]. 武汉理工大学学报,2009,31(8):159-163. Wei Yingsan,Wang Yongsheng. Unified description of outflow non-uniformity of waterjet duct[J]. Journal of Wuhan University of Technology, 2009, 31(8): 159-163.(in Chinese)[9]Hu Peixin, Mehrdad Z. Investigations of 3D turbulent flow inside and around a water-jet intake duct under different operating conditions [J]. Journal of Engineering, 1999, 121(2): 396-404.[10]Seil G J. The effect of the shaft, shaft rotation and scale on the flow in waterjet inlets[C]//Proceedings of the International Conference on Waterjet Propulsion—Ⅲ:Gothenburg, Sweden: RINA, 2001.[11]金平仲. 船舶喷水推进[M]. 北京:国防工业出版社,1986.[12]Cao Puyu, Wang Yang, Li Yacheng. Investigating the effect of the rotation shaft on the performance of the water-jet propulsion[C]//Proceedings of the 12th Asian International Conference on Fluid Machinery. Yogyakarta, Indonesia: AFMC, 2013.[13]Alexander K. The waterjet as an engine dynamometer[C]//Proceedings of the International Symposium on Waterjet Propulsion Latest Development. London: RINA, 1994.