Abstract: In order to renew the pumping stations, in which the pumps are directly linked with motor, a new type of transmission device was proposed due to its advantage of variable speed. This new device consists of a planetary gear transmission and a gear reduction. The planetary gear transmission is composed of a 2X-H planet bar, two clutches and two brakes which control the power input. Based on the analysis of movement of planetary gears, the transmission ratio for each step was conducted. The final planetary gear drive transmission design was determined by the calculation and analysis of two kinds of planet tooth number matching. As a result, a motor with 1 500 r/min was selected and two transmission ratios of 3 and 1.5 were decided. Through the right matching of planet tooth numbers, the speed requirement of 250 r/min and 125 r/min for the pump station was achieved. This design can also meet the need of frequent changes of pump in flow and head in the big project of “South to North Water Transfer”.
[1]兰才有,仪修堂,段桂芳,等.南水北调东线工程水泵机组选型方法探讨[J].排灌机械,2004, 22(1): 1-9.Lan Caiyou, Yi Xiutang, Duan Guifang, et al. Study on selection of water pump-unit on the east route of South-North Water Diversion Project[J]. Drainage and Irrigation Machinery, 2004, 22(1): 1-9.(in Chinese)[2]关醒凡,商明华,谢卫东,等.后置灯泡式贯流泵装置水力模型[J].排灌机械,2008,26(1): 25-28.Guan Xingfan, Shang Minghua, Xie Weidong, et al. Hydraulic model and its pilot-plant unit for rear bulb-type cross-flow pump[J].Drainage and Irrigation Machinery, 2008, 26(1):25-28.(in Chinese)[3]厉明祥. 南水北调大型泵结构设计研究[J].排灌机械,2003,21(3):1-5.Li Mingxiang. Research on the structure design of large pump for the South to North Water Transfer Project[J]. Drainage and Irrigation Machinery,2003,21(3):1-5.(in Chinese)[4]储训,陈履.大型泵站建设和更新改造对策[M].南京:河海大学出版社,2000:12-77.[5]刘红宇,刘梅清.东深供水改造工程太园泵站设计中几个问题的研究[J].中国农村水利水电, 2003,45(10):56-60.Liu Hongyu,Liu Meiqing.Study of some problems about Taiyuan pumping stations in Dongshen water supply improvement project[J].China Rural Water and Hydropower,2003,45(10):56-60.(in Chinese)[6]Salgado D R, Alonso F J. Optimal mechanical spindle speeder gearbox design for high-speed machining[J]. International Journal of Advanced Manufacturing Technology, 2009,40(7/8):637-647.[7]Castillo J M. The analytical expression of the efficiency of planetary gear trains[J]. Mechanism and Machine Theory, 2002,37(2):197-214.[8]胡丰宾,孙冬野,秦大同,等.DCT双离合器联合起步模式建模与仿真[J].江苏大学学报:自然科学版,2010,31(1):19-25.Hu Fengbin, Sun Dongye, Qin Datong, et al. Modeling and simulation for dual-clutch launching mode of DCT[J].Journal of Jiangsu University:Natural Science Edition,2010, 31(1):19-25.(in Chinese)[9]饶振刚.行星齿轮传动设计[M].北京:化学工业出版社, 2003:11-46,109-118.[10]鲍培德,马履中,谢俊,等. 大中型泵站行星变速传动装置的分析与应用[J].中国农村水利水电,2005,47(7):77-79.Bao Peide, Ma Lüzhong, Xie Jun, et al. Research on the planetary gearbox transmission device of large-and-middle sized pumping station[J]. China Rural Water and Hydropower, 2005,47(7):77-79.(in Chinese)