Matlab与InTouch间直接通讯的实现

doi:10.3969/j.issn.1671-7775.2009.01.015

摘要
图/表
参考文献
相关文章 (0)

全文: PDF (247 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为解决以往Matlab与InTouch间数据通讯必须利用第3方软件进行接口编程的难题，在对Matlab和InTouch软件所提供的DDE接口研究的基础上，以Matlab为客户端、InTouch做服务器，在Matlab环境下，基于DDE技术分别用M文件和S函数两种不同的方法，首次实现了Matlab和InTouch之间的直接通讯．文中给出了用于实现Matlab和InTouch之间直接通讯的M文件和S函数的实例．实例证明，两种方法实现方便，并能支持多输入多输出模型的数据交换．

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	肖民
	惠磊

关键词 ： Matlab')" href="#">Matlab, InTouch ')" href="#"> InTouch , 通讯')" href="#">通讯, 软件')" href="#"> 软件, 接口 DDE')" href="#"> 接口 DDE

Abstract：In order to solve the problem that the third software must be used to realize the communication between Matlab and InToueh, and by taking Matlab as client terminal and InTouch as server, two different methods based on DDE technology, named m -file method and s -function method, were developed to realize the direct communication between Matlab and InTouch for the first time. The examples of M - file and S - function to realize the communication between Matlab and InTouch were provided. It is proved that this two methods are easy to be realized and can support data exchange between MIMO models

Key words： Matlab')" href="#"> Matlab InTouch')" href="#">InTouch communication')" href="#">communication software')" href="#">software interface')" href="#">interface DDE')" href="#"> DDE

基金资助:

江苏省船舶先进设计制造技术重点实验室开放研究基金资助项目（CJ0706）

引用本文:

肖民, 惠磊. Matlab与InTouch间直接通讯的实现[J]. 江苏大学学报（自然科学版）, 2009, 30(1): 62-65. Xiao Min, Hui Lei. Direct communication between Matlab and InTouch[J]. Journal of Jiangsu University(Natural Science Eidtion) , 2009, 30(1): 62-65.

链接本文:

http://zzs.ujs.edu.cn/xbzkb/CN/10.3969/j.issn.1671-7775.2009.01.015 或 http://zzs.ujs.edu.cn/xbzkb/CN/Y2009/V30/I1/62