Research on one-piece suspension damping pillar based on magnetorheological materials
1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun， Jilin 130022, China; 2. Automotive Engineering Research Institute, Jiangsu University, Zhenjiang, Jiangsu 212013, China
Abstract：To improve the ride comfort of car and the adapting ability to the time-varying road surface, a new integrated suspension design scheme based on magnetorheological materials was proposed to realize the graded regulation of stiffness for the electronically controlled air suspension. The damping pillar of the air suspension was improved based on the characteristics of magnetorheological materials to achieve the infinite regulating of stiffness and the damping of suspension system. The structural composition and working principle of the damping pillar were introduced, and the mathematical models of stiffness and damping characteristics were established respectively. An experimental bench was set up to identify the model parameters according to the experimental results, and the simulation results were compared with the experimental results. The results show the mathematical model of damping pillar is accurate, and the design scheme is suitable.
LI Z X, SHEN A C, JIANG H.Research on multiagent game control system of an electronic air suspension[J]. Automotive Engineering, 2020, 42(6): 793-800，831.（in Chinese）
［2］
ZHAO R, XIE W, WONG P K, et al. Adaptive vehicle posture and height synchronization control of active air suspension systems with multiple uncertainties[J]. Nonlinear Dynamics, 2020, 99(3): 2109-2127.
LIU L C, ZHAN Q F, CHEN L Q, et al.Research on hardwareintheloop simulation test for electronically controlled air suspension[J]. Journal of Machine Design,2017,34(9):48-53. (in Chinese)
［4］
TANG G, ZHU H J, ZHANG Y Q, et al. Studies of air spring mathematical model and its performance in cab suspension system of commercial vehicle[J]. SAE Technical Papers, doi:10.4271/2015-01-0608.
LU W C, YANG F, WANG S H, et al. Damping characteristics of a coaxial integrated strut with adjustable pneumatic damping[J]. Journal of Vibration and Shock, 2015, 34(20): 115-119,128. (in Chinese)
LI G, ZHANG H, WANG X, et al. Test research on semiactive suspension based on solenoidactuated damping continuously variable shock absorber[J]. Automobile Technology,2016(9):35-38,42. (in Chinese)
JIANG H B, LIU Q L. Rear suspension parameter optimization of offroad vehicle NJ2045 equipped with an adjustable stiffness and damping strut[J]. Journal of Guangxi University(Natural Science Edition),2017,42(3):809-815. (in Chinese)
［8］
LI W, CHEN Y, ZHANG S, et al. Damping characteristic analysis and experiment of air suspension with auxiliary chamber[J]. IFACPapersOnLine, 2018, 51(17):166-172.
ZHANG Z Y, WANG J B, HU L, et al. Semiactive control of air suspension considering pavement preview information and parametric uncertainty[J]. Journal of Vibration and Shock,2020,39(23):21-29. (in Chinese)
［10］
NIETO A J, MORALES A L, TRAPERO J R, et al. An adaptive pneumatic suspension based on the estimation of the excitation frequency[J]. Journal of Sound Vibration, 2011, 330(9):1891-1903.
［11］
MOHEYELDEIN M M, ABDELTAWWAB A M, ABDEIGWWAD K A, et al. An analytical study of the performance indices of air springsuspensions over the passive suspension[J]. BeniSuef University Journal of Basic and Applied Sciences, 2018,7(4)：525-534.
LI Z X, JU L Y, JIANG H, et al. Parameter optimization and control of air suspension with adjustable auxiliary chamber[J]. Automotive Engineering, 2015, 37(8):941-945，969. (in Chinese)
［13］
SUN S S, YANG J, LI W H, et al. Development of an isolator working with magnetorheological elastomers and fluids[J]. Mechanical Systems and Signal Processing, 2017, 83(13):371-384.
［14］
BASTOLA A K, LI L. A new type of vibration isolator based on magnetorheological elastomer[J]. Materials and Design, 2018, 157:431-436.
［15］
NGUYEN X B, KOMATSUZAKI T, IWATA Y, et al. Modeling and semiactive fuzzy control of magnetorheological elastomerbased isolator for seismic response reduction[J]. Mechanical Systems and Signal Processing, 2018, 101(15):449-466.
