Effect of single-stage aging treatment on microstructure of 6082 aluminum alloy profile
1. School of Materials Science and Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2. Jiangsu Zhenhexiang New Material Co., Ltd., Changzhou, Jiangsu 213011, China
Abstract:To optimize the aging treatment parameters and explore the strengthening and toughing mechanism of aging treatment, the effects of single-stage aging treatment on the microstructure evolution of 6082 extruded aluminum alloy profiles were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). The results show that the aging treatment can effectively reduce the residual stress stored during the extrusion deformation process. The crystalline grain grows slightly with average size increased from 7.02 μm to 9.80 μm. The average crystalline grain boundary angle is decreased from 25.51° to 16.06°, and the low angle grain boundary ratio is markedly increased from 47.91% to 67.47%. The aging treatment can significantly change the grain distribution in the {100} and {110} directions of the crystalline grain, which remarkably enhances the texture of the sample in the {100} and {110} directions. These changes are conducive to the improvement of the performance of 6082 aluminum alloy extruded profiles.
王宏明1, 杨广林1, 李桂荣1, 潘亚明2. 单级时效处理对6082铝合金型材微观组织的影响[J]. 江苏大学学报(自然科学版), 2020, 41(4): 434-439.
WANG Hongming1, YANG Guanglin1, LI Guirong1, PAN Yaming2. Effect of single-stage aging treatment on microstructure of 6082 aluminum alloy profile[J]. Journal of Jiangsu University(Natural Science Eidtion)
, 2020, 41(4): 434-439.
KHADYKO M, MORIN D, BRVIK T, et al. Tensile ductility of extruded aluminium alloy AA6063 in diffe-rent tempers\[J\]. Materials Science & Engineering A, doi: 10.1016/j.msea.2018.12.048.
[2]
KHADYKO M, MYHR O R, DUMOULIN S,et al. A microstructure-based yield stress and work-hardening model for textured 6xxx aluminium alloys \[J\]. Philosophical Magazine, 2016, 96(11): 1047-1072.
[3]
ZHAO T S, ZHOU J, ZHOU J F, et al. Influence of pre-stretching and aging processes on comprehensive performance of aluminum alloy\[J\]. Materials and Ma-nufacturing Processes, 2018, 33(15): 1641-1647.
WANG H M, CHU Q Z, LI G R, et al. Effect of simultaneous magnetic field and deep cryogenic treatment on the microstructure and mechanical properties of aluminum-brass\[J\]. Materials Review, 2017, 31(5): 82-86. (in Chinese)
[5]
LUO P, MCDONALD D T, XU W, et al. A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing\[J\]. Scripta Materialia, 2012, 66(10): 785-788.
LI G R, LI Y M, WANG F F,et al. Effect of high pulsed magnetic field on microstructrue and mechanical properties of TC4 titanium alloy\[J\]. The Chinese Journal of Nonferrous Metals, 2015, 25(2): 330-337. (in Chinese)
XU X J, ZHANG Y K, DENG P A, et al. Effect of pre-recovery-annealing treatment on microstructure and pro-perties of extruded 7085 aluminum alloy\[J\]. Transactions of Materials and Heat Treatment, 2014, 35(8): 36-40. (in Chinese)
[8]
CABIBBO M. Microstructure strengthening mechanisms in different equal channel angular pressed aluminum alloys\[J\]. Materials Science and Engineering A, 2013, 560: 413-432.
TAN C, XU X J, JIANG W, et al.Effect of pre-recove-ry treatment on microstructure and properties of ultra high strength aluminum alloy extrusion treated by solid solution-T652 treatment\[J\]. The Chinese Journal of Nonferrous Metals, 2015, 25(11): 3019-3025. (in Chinese)
LUO K Y, L C, WANG Q W, et al. Temperature field and residual stress distribution of 7075-T6 Al alloy welding line connected by laser butt welding\[J\]. Journal of Jiangsu University (Natural Science Edition), 2014, 35(2): 224-228. (in Chinese)