Fault diagnosis of 48 V micro hybrid system based on structural analysis
1. Huibei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan, Hubei 430070,China; 2. Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan, Hubei 430070, China; 3. Technology Center of Dongfeng Trucks, Wuhan, Hubei 430070, China
Abstract：The working principle of 48 V micro hybrid system and the structural analysis were introduced. The simulation model of 48 V micro hybrid system was established in Matlab/Simulink software to analyze the common failure modes of the sensors and synchronous belt transmission. Five minimal structurally overdetermined sets（MSO sets） corresponding to fault model of 48 V micro hybrid system were selected based on structural analysis (SA) to design the fault detection and isolation (FDI) system with fault eigenvectors of system defined by the diagnostic strategy. The simulation results show that compared with traditional methods, the diagnostic method based on structural analysis uses less residuals and can simply algorithm. The FDI system can use only five residuals to detect and isolate 10 kinds of system faults in 48 V micro-hybrid system, and all of them can be completely isolated from each other.
王志鹏1, 杜常清1,2, 胡杰1,2, 顾炎麟1, 任卫群3. 基于结构分析的48 V微混系统的故障诊断[J]. 江苏大学学报（自然科学版）, 2019, 40(6): 636-642.
WANG Zhipeng1, DU Changqing1,2, HU Jie1,2, GU Yanlin1, REN Weiqun3. Fault diagnosis of 48 V micro hybrid system based on structural analysis[J]. Journal of Jiangsu University(Natural Science Eidtion)
, 2019, 40(6): 636-642.
YANG F, HU C M, ZHANG B J. Simulative research of control strategy for 48 V mild hybrid system［J］. Chinese Internal Combustion Engine Engineering, 2017, 38(6):111-118.(in Chinese)
ZHAO Z G, YANG Y Y, HE L, et al. Torque transient optimal control in boost mode of 48 V micro hybrid electric vehicle［J］. Automobile Technology, 2015(7):46-51.(in Chinese)
［3］
MAGA M, RAMDANI N, TRAV-MASSUYS L. Robust fault detection in hybrid systems using set-membership parameter estimation［J］. IFAC Papers Online, 2015, 48(21):296-301.
［4］
MEZIANE H, LABARRE C, LEFTERIU S, et al. Fault detection and isolation for a multi-cellular converter based on sliding mode observer［J］. IFAC Papers Online, 2015, 48(21):164-170.
［5］
HWANG W, HUH K. Fault detection and estimation for electromechanical brake systems using parity space approach［J］. Journal of Dynamic Systems Measurement ＆ Control, 2015, 137(1): 014504.
［6］
CHRISTOFER S, ERIK F, LARS N. Selecting and utilizing sequential residual generators in FDI applied to hybrid vehicles［J］. IEEE Transactions on Systems Man ＆ Cybernetics Systems, 2014, 44(2):172-185.
［7］
ZHANG J Y, RIZZONI G. Functional safety of electrified vehicles through model-based fault diagnosis［J］. IFAC Papers Online, 2015, 48(15):454-461.
［8］
CHEN Q, AHMED Q, RIZZONI G, et al. Design and evaluation of model-based health monitoring scheme for automated manual transmission［J］. Journal of Dynamic Systems Measurement ＆ Control, 2016, 138(10): 101011.
CHEN Q, YAO Z G, AHMED Q, et al. A research on structural analysis-based fault diagnosis theory and its application［J］. Automotive Engineering, 2017, 39(11):1341-1349.(in Chinese)
［11］
ZHANG J Y, RIZZONI G. Structural analysis for diagnosability and reconfigurability, with pplication to electric vehicle drive system［J］. IFAC Papers Online, 2015, 48(21):1471-1478.
［12］
MATTIAS K, JAN , MATTIAS N.An efficient algorithm for finding minimal overconstrained subsystems for model-based diagnosis［J］. IEEE Transactions on Systems, Man, and Cybernetics Part A: Systems and Humans, 2007, 38(1):197-206.
2019, Vol. 40 
