Abstract:To solve the problems of permanent magnet vernier motor (PMVM) with high torque density and high power density, the performance of PMVM was compared with that of traditional permanent magnet synchronous motor (PMSM). The structure and working principle of 6slot/32pole splittooth PMVM were introduced. The air-gap flux density of PM field and armature reaction magnetic field (ARMF), the noload EMF, the torque and the loss of 6slot/32pole split-tooth PMVM were analyzed by finite element simulation software of JMAG and quantitatively compared with those of two traditional PMSMs with the same diameter, stack length and number of stator teeth. The results show that compared with 6slot/32pole and 6slot/4pole PMSMs, the average torque of 6slot/32pole split-tooth PMVM is increased by about 45.0% and 76.2%, and the torque ripple is decreased about 90.5% and 95.0%, respectively. The results reveal that the split-tooth PMVM has merits of high torque density and low cogging torque. However, the air-gap flux density of the split-tooth PMVM contains large number of harmonics with different pole-pairs and rotation speeds, which leads to higher iron loss and PM eddy current loss.
GUO Y J. Robust finitetime control of PMSW servo system with input saturation constraint[J]. Journal of Chongqing University of Posts and Telecommunications (Natural Science Edition), 2019, 31(5): 737-742. (in Chinese)
WANG T T, WANG H Z, LIU Q X, et al. Design of fuzzy PID controller for brushless DC motor optimized by GA[J]. Journal of Jilin University (Science Edition), 2020, 58(6): 1421-1428. (in Chinese)
LI H, CHU H L, ZHAO Q L, et al. Synchronous circuit design of brushless DC motor[J]. Journal of Jilin University (Science Edition), 2021, 59(1): 162-167. (in Chinese)
TANG J L, ZHAO H W, WANG T T, et al. Design of BP neural network PID controller optimized by LQR[J]. Journal of Jilin University (Science Edition), 2020, 58(3): 651-658. (in Chinese)
[5]
LUO X, NIU S X. A novel contrarotating power split transmission system for wind power generation and its dual MPPT control strategy[J]. IEEE Transactions on Power Electronics, 2017, 32(9): 6924-6935.
[6]
LIU G H, YANG J Q, ZHAO W X, et al. Design and analysis of a new faulttolerant permanentmagnet vernier machine for electric vehicles[J]. IEEE Transactions on Magnetics, 2012, 48(11): 4176-4179.
HE L L, AN Q, WANG J W, et al. Power test system of 1.5 kW wind turbine[J]. Journal of Drainage and Irrigation Machinery Engineering, 2019, 37(12):1056-1060. (in Chinese)
ZHAO B, WU Y J, WANG S L, et al. Analysis of structural characteristics of vertical axis wind turbine with wind gathering device in Tibet[J]. Journal of Drainage and Irrigation Machinery Engineering, 2021,39(3):270-277. (in Chinese)
ZHAO B, MA H P, ZHAO Y X, et al. Analysis on application of vertical axis wind turbines in QinghaiTibet Plateau[J]. Journal of Drainage and Irrigation Machinery Engineering, 2018, 36(3):250-256. (in Chinese)
[10]
LI D W, ZOU T J, QU R H, et al. Analysis of fractionalslot concentrated winding PM vernier machines with regular openslot stators[J]. IEEE Transactions on Industry Applications, 2018, 54(2): 1320-1330.
WANG S C, ZHU X Y, LI D D, et al. Speed robust control of permanent magnet synchronous motor in nonideal network environment[J]. Journal of Drainage and Irrigation Machinery Engineering, 2020, 38(4): 421-426,432. (in Chinese)
DU Y, ZOU C H, ZHU X Y, et al. Comparison of winding arrangements and electromagnetic characteristics of a linear primary permanent magnet vernier machine[J]. Transactions of China Electrotechnical Society, 2017, 32(3): 130-138. (in Chinese)
LU H, DU Y, LIU X B, et al. Static performance analysis of magnetic fieldmodulated doublyfed brushless hybrid excitation motor[J]. Transactions of China Electrotechnical Society, 2020, 35(14):2969-2978. (in Chinese)
[14]
FU W N, HO S L. A quantitative comparative analysis of a novel fluxmodulated permanentmagnet motor for lowspeed drive[J]. IEEE Transactions on Magnetics, 2010, 46(1): 127-134.
[15]
QU R H, LI D W, WANG J. Relationship between magnetic gears and vernier machines[C]∥Proceedings of the 2011 International Conference on Electrical Machines and Systems, doi: 10.1109/ICEMS.2011.6073448.
[16]
HO S L, NIU S X, FU W N. Design and comparison of vernier permanent magnet machines[J]. IEEE Transactions on Magnetics, 2011, 47(10): 3280-3283.
[17]
TOBA A, LIPO T A. Generic torquemaximizing design methodology of surface permanentmagnet vernier machine[J]. IEEE Transactions on Industry Applications, 2000, 36(6): 1539-1546.
[18]
LI J G, CHAU K T, JIANG J Z, et al. A new efficient permanentmagnet vernier machine for wind power generation[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1475-1478.
[19]
ISHIKAWA R, SATO K, SHIMOMURA S, et al. Design of inwheel permanent magnet vernier machine to reduce the armature current density[C]∥Proceedings of the 2013 International Conference on Electrical Machines and Systems, doi: 10.1109/icems.2013.6754567.
[20]
LI J G, CHAU K T, LI W L. Harmonic analysis and comparison of permanent magnet vernier and magneticgeared machines[J]. IEEE Transactions on Magnetics, 2011, 47(10): 3649-3652.