Abstract:For traditional high flow self-priming centrifugal pumps are subject to poor self-priming performance and low efficiency, a large flow self-priming centrifugal pump with a new self-priming structure is designed. In the design, a high-pressure jet is involved into the gas exhaust system of the pump, then the structure of jet nozzle is designed carefully and reasonably, and their main dimensions are decided accordingly. Moreover, a check valve is designed as well for the nozzle, and a globe valve with good air tightness is chosen. A new coupling-clutch transmission device is put forward, in which the shafts of the pump and a compressor are connected with a pulley to ensure the compressor to be detached quick after the self-priming completion. A compressor is selected according to the requirement on the exhaust by the pump and relevant national technical standards. Experiments on the self-priming performance of the newly designed self-priming pump are carried out, and the priming times at different suction heights are recorded. The experimental results show that the self-priming times are 62, 92, 121 and 173 s, respectively, when the suction heights are 5.3, 6.0, 7.0 and 8.1 m. These self-priming times are less than those specified in relevant national technical standards. Thus, for the pump, its advantage in the self-priming performance is not only obvious, but the overall efficiency of the pump unit is also improved significantly.
武永生, 刘建瑞, 李红, 陈凯, 常浩. 新型自吸离心泵自吸结构设计与试验研究[J]. 排灌机械工程学报, 2016, 34(7): 579-583.
WU Yongsheng, LIU Jianrui, LI Hong, CHEN Kai, CHANG Hao. Design and test of new self-priming structure for self-priming centrifugal pump. Journal of Drainage and Irrigation Machinery Engin, 2016, 34(7): 579-583.
[1]刘建瑞, 文海罡, 高振军, 等. 半开式叶轮与导流器间隙 对自吸泵性能的影响[J]. 流体机械, 2013, 41(3): 5-9. LIU Jianrui, WEN Haigang, GAO Zhenjun, et al. Performance effect of the clearance between semi-open impeller and fluid director of self-priming pump [J]. Fluid machinery, 2013, 41(3): 5-9.(in Chinese)[2]孙幼波, 陈涛, 杨帅, 等.立式自吸泵水力性能分析及内部结构的改进[J].浙江大学学报(工学版),2013,47(2):332-337. SUN Youbo, CHEN Tao, YANG Shuai, et al. Vertical self-priming pump water power performance analysis and improvement of internal structure [J]. Journal of Zhejiang University(engineering science), 2013,47(2): 332-337.(in Chinese)[3]潘中永,张大庆,李彦军,等.喷灌与滴灌两用自吸泵设计与分析[J].华中科技大学学报(自然科学版),2014.42.(3):122-126. PAN Zhongyong, ZHANG Daqing, LI Yanjun,et al. Sprinkler irrigation and drip irrigation and self-priming pump design and analysis [J]. Journal of Huazhong University of Science and Technology(natural science edition), 2014,42(3): 122-126.(in Chinese)[4]张金凤, 冒杰云, 袁寿其,等. 变转速工况下汽车冷却水泵内外特性变化规律[J]. 流体机械, 2014, 42(8): 1-6. ZHANG Jinfeng, MAO Jieyun,YUAN Shouqi,et al. Effect of rotation speed on the inner flow and perfor-mance characteristics for an automobile cooling pump[J]. Fluid machinery, 2014, 42(8): 1-6.(in Chinese)[5]李红, 徐德怀, 李磊,等. 自吸泵自吸过程瞬态流动的数值模拟[J]. 排灌机械工程学报, 2013, 31(7): 565-569. LI Hong, XU Dehuai, LI Lei, et al. Numerical simulation of transient flow in self-priming centrifugal pump during self-priming period[J].Journal of drainage and irrigation machinery engineering, 2013, 31(7): 565-569.(in Chinese)[6]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2011.[7]刘建瑞,汤富俊,陈斌,等. 大型自吸离心泵设计及试验研究[J]. 水泵技术,2014(5):1-5. LIU Jianrui, TANG Fujun, CHEN Bin,et al. Large self-priming centrifugal pump design and experiments [J]. Pump technology, 2014(5):1-5.(in Chinese)[8]孙艳琦,牛文全.文丘里管结构参数对其水力性能的影响 [J].西北农林科技大学学报,2010,38(2):211-218. SUN Yanqi, NIU Wenquan. The effect on the hydraulic performance of the venturi structural parameters [J]. Journal of Northwest Agriculture and Forestry University of Science and Technology, 2010,38(2): 211-218.(in Chinese)[9]刘建瑞. 一种用于新型自吸离心泵的射流喷嘴: 201420107039.9[P]. 2014-03-11.[10]刘建瑞.一种用于新型自吸离心泵的逆止阀: 201420107068.5[P]. 2014-03-11.[11]滕人博,刘建瑞,王鸿睿,等. 碗式回流阀的结构分析及试验研究[J]. 中国农村水利水电,2008(5):31-33. TENG Renbo, LIU Jianrui, WANG Hongrui,et al. Bowl type backflow of structure analysis and test study [J]. China′s rural water conservancy and hydropower, 2008(5): 31-33.(in Chinese)