Solid volume concentration distribution of solid-liquid two-phase flow in HD type petrol-chemical process pump
Liu Yi1,2, Jiang Yue1, Han Zhengjie1
1.School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China; 2.Wenzhou Pump and Valve Engineering Institute, Wenzhou, Zhejiang 325105, China
Abstract:The steady solid-liquid two-phase flow field in the fist stage of a HD type petrol-chemical process pump is simulated with CFD software by employing the Reynolds Averaged Navier-Stokes equations and the standard k-ε turbulence model as well as SIMPLEC algorithm to explore the distribution pattern of solid particle volume concentration in the double-suction impeller and double-channel volute of the first stage of the pump. The two-phase flow is subject to different solid bulk volume concentrations and particle diameters. The results show that solid volume concentration distribution becomes non-uniform in the double-suction impeller but exhibits a noticed regular pattern with increasing solid particle bulk concentration at constant particle diameter, that is, the concentration is higher near the blade suction side than the pressure side. Besides, solid particles have a tendency to move to the blade suction side. Moreover, the particles move towards the suction side with increasing particle dia-meter at fixed bulk concentration; however, the non-uniformity of solid concentration remains nearly unchanged. In the double-channel volute, solid concentration is distributed unevenly as well; particularly, the local solid particle concentration is increased from section 1 to section 8. Additionally, in the diffuser of volute, the concentration is higher nearly the diffuser side wall with tongue than the opposite side wall of the tongue. The solid particles with large diameter tend to move towards the opposite side wall of the tongue, causing a relatively higher concentration there.
刘宜,, 蒋跃, 韩正杰. HD型石油化工流程泵内部固液两相分布规律[J]. 排灌机械工程学报, 2013, 31(9): 758-762.
Liu Yi,, Jiang Yue, Han Zhengjie. Solid volume concentration distribution of solid-liquid two-phase flow in HD type petrol-chemical process pump. Journal of Drainage and Irrigation Machinery Engin, 2013, 31(9): 758-762.
[1]李易松,魏建峰.小粒径固液两相流在旋流泵内运动的数值模拟[J].流体机械,2010,38(7):20-23. Li Yisong,Wei Jianfeng.Numerical simulation of interior flow in vortex-pump for liquid-solid two-phase medium with small size particles[J].Fluid Machinery,2010,38(7):20-23.(in Chinese)[2]田周发.双吸泵叶轮抽黄河含沙水磨损原因浅析及对策[J].水泵技术,2007(2):29-31. Tian Zhoufa.Research in the reason of wear and tear of double suction pump impeller with the Yellow River water and sand and the countermeasure[J].Pump Techno-logy,2007(2):29-31.(in Chinese)[3]Li Yi, Zhu Zuchao, He Zhaohui, et al.Abrasion characteristic analyses of solid-liquid two-phase centrifugal pump [J]. Journal of Thermal Science, 2011,20(3):283-287.[4]Zhang Yuliang, Li Yi, Cui Baoling, et al.Numerical simulation and analysis of solid-liquid two-phase flow in centrifugal pump[J].Chinese Journal of Mechanical Engineering, 2013,26(1):53-60.[5]徐振法,王银凤,唐铃凤.颗粒对渣浆泵内部流场影响规律的研究[J].机械工程师,2008(7):125-127. Xu Zhenfa, Wang Yinfeng, Tang Lingfeng.Influence of particle on inner flow field in slurry pump[J].Mechanical Engineer,2008(7):125-127.(in Chinese)[6]徐振法,刘宜,李会暖.双吸式叶轮中固体颗粒分布规律的研究[J].起重运输机械,2009(9):70-73. Xu Zhenfa, Liu Yi,Li Huinuan.Research on the pattern of solid particle distribution in the double-suction impeller[J].Hoisting and Conveying Machinery,2009(9):70-73.(in Chinese)[7]徐振法,刘宜,李会暖.双吸式化工流程泵内部流场的数值分析[J].成组技术与生产现代化,2009,26(3):12-16. Xu Zhenfa, Liu Yi,Li Huinuan.Numerical simulation of flow in the double suction chemical pump[J].Group Technology & Production Modernization,2009,26(3):12-16.(in Chinese)[8]潘地林.蜗壳内部流动特性数值分析及改进设计研究[J].流体机械,1999,27(1):14-18. Pan Dilin.Characteristics numerical analysis of internal flow in volute and the research of improvement design[J].Fluid Machinery,1999,27(1):14-18.(in Chinese)[9]杨玫,吴承雄,沈建平,等.向心涡轮无叶蜗内部三维湍流场的数值模拟[J].华中理工大学报,1996,24(7):15-18. Yang Mei, Wu Chengxiong, Shen Jianping,et al. Numerical simulation of the three-dimension turbulent flow field inside a volute of a centripetal turbine[J].Journal of Huazhong University of Science and Technology,1996,24(7):15-18.(in Chinese)[10]王晓燕,刘宜,陈玉芳.HD型石油化工流程泵双蜗壳内部流场数值计算[J].排灌机械,2007,25(1):21-24. Wang Xiaoyan,Liu Yi,Chen Yufang. Numerical simulation of flow field in the double volute of HD type petrol chemical process pump[J]. Drainage and Irrigation Machinery,2007,25(1):21-24.(in Chinese)[11]詹友刚.Pro/ENGNEER中文野火版2.0高级应用教程[M].北京:机械工业出版社,2006.[12]刘胜柱,郭鹏程,罗兴锜.离心泵叶轮内的网格生成与计算流体力学分析[J].农业工程学报,2004,20(5):78-81. Liu Shengzhu, Guo Pengcheng, Luo Xingqi, et al. Grid generation in the centrifugal pump impeller and computational fluid dynamics analysis[J]. Transactions of the CSAE, 2004,20(5):78-81.(in Chinese)[13]王福军.计算流体动力学分析——CFD软件原理与应用[M].北京:清华大学出版社,2004:114-122.[14]陆斌斌,刘厚林,谈明高,等.双流道泵内非定常固液两相流的数值分析[J].农机化研究,2009(5):34-37. Lu Binbin,Liu Houlin,Tan Minggao,et al.Numerical analysis on unsteady solid-liquid two-phase flow in a double channel pump[J].Journal of Agricultural Mechanization Research,2009(5):34-37.(in Chinese)[15]关醒凡.现代泵技术手册[M].北京:中国宇航出版社,2011.