Abstract：Experimental investigation was performed for electrostatic spray of several spray liquids under capillaryannular electrode configuration. The effects of the material properties of the spray liquids and electrode voltage on electrostatic spraying were analyzed through the working parameters of chargemassratio(CMR). Experiments show that in the case of microflow rate ranges, there is almost a linear growth of the applied voltage and the CMR before Rayleigh limit within the right voltage range. Spray liquid electrical conductivity has a great influence on the chargemassratio，the higher the spray liquid electrical conductivity is, the faster the CMR of drops with the electrode voltage increases, and when it is lower, the applied voltage plays a leading role on the CMR. The CMR response is inversely proportional to spray liquid viscosity but proportional to spray liquid surface tension.
王军锋, 王泽, 霍元平, 毛文龙, 张娟娟. 荷电电压、介质物性对静电雾化特征的影响[J]. 排灌机械工程学报, 2012, 30(4): 469-472.
WANG Jun-Feng, WANG Ze, HUO Yuan-Ping, MAO Wen-Long, ZHANG Juan-Juan. Effects of liquid properties on electrostatic spray characteristics. Journal of Drainage and Irrigation Machinery Engin, 2012, 30(4): 469-472.
［1］Faschingleitner J, Hoflinger W. Evaluation of primary and secondary fugitive dust suppression methods using enclosed water spraying systems at bulk solids handing\[J\]. Advanced Powder Technology, 2011, 22(2): 236-244.［2］Maski Devanand, Durairaj Divaker. Effects of charging voltage, application speed, target height, and orientation upon charged spray deposition on leaf abaxial and adaxial surfaces\[J\]. Crop Protection, 2010,29(2):134-141.［3］刘雪美, 张晓辉, 侯存良. 喷杆喷雾机风助风筒流场分析与结构优化\[J\]. 农业机械学报, 2010,42（4）：70-75.Liu Xuemei, Zhang Xiaohui, Hou Cunliang. Air flow simulation and flow field optimization for airduct of airassisted boom sprayer \[J\]. Transactions of the Chinese Society for Agricultural Machinery, 2010,42（4）:70-75.(in Chinese)［4］Toljic Nikola, Adamiak K, Castle G S P, et al. Threedimensional numerical studies on the effect of the particle charge to mass ratio distribution in the electrostatic coating process\[J\]. Journal of Electrostatics, 2011,69(3):189-194.［5］Maski Devanand, Durairaj Divaker. Effects of electrode voltage, liquid flow rate, and liquid properties on spray chargeability of an airassisted electrostaticinduction spraycharging system\[J\]. Journal of Electrostatics, 2010,68(2):152-158.［6］Meng Xiangbo, Zhu Jingxu, Zhang Hui. Influences of different powders on the characteristics of particle charging and deposition in powder coating processes\[J\]. Journal of Electrostatics, 2009,67(4):663-671.［7］Grimm Ronald L, Beauchamp J L. Evaporation and discharge dynamics of highly charged multicomponent droplets generated by electrospray ionization\[J\]. Journal of Physical Chemistry A, 2010,114(3):1411-1419.［8］Wilson J M. A linear source of electrostatically charged spray\[J\]. Journal of Agricultural Engineering Research, 1982,27(4):355-362.［9］Almekinders H, Ozkan H E, Reichard D L, et al. Spray deposit patterns of an electrostatic atomizer\[J\]. Transactions of the American Society of Agricultural Engineers, 1992,35(5):1361-1367.［10］Hensley Joshua L, Feng Xin, Bryan James E. Induction charging nozzle for flat fan sprays\[J\]. Journal of Electrostatics, 2008,66(5/6):300-311.
