Zhu Delan1, Wu Pute1,2, Li Lanbin1, Zhang Chen1, Wang Jian1
(1.College of Resources and Environment,Northwest Agriculture and Forestry University, Yangling, Shaanxi 712100, China; 2.National Engineering Center for Irrigation Water Savings,Northwest Agriculture and Forestry University, Yangling, Shaanxi 712100, China)
Abstract:In order to find design method of gravity-fed manifold subunit, the emitters discharge variation rate caused by hydraulic variation, emitter manufacturing variation and micro-topography variation were used as the criteria of irrigation uniformity. Then, the emitter discharge variation rate caused by hydraulic factor, the pressure head variation, and the maximum pressure head for different pressure sections were determined. By analyzing water pressure head relationship of different pressure units, the distribution coefficient of manifold pressure head variation for different pressure area was calculated, and the manifold subunit design was divided into independent processes for laterals and manifold. In the manifold design, a two-stage optimal design method was used. The size of each of the pressure sections was determined according to the pressure head distribution along the manifold. The different emitter types were chosen according to the nominal design pressure which best matches the available pressure at the entrance of each lateral. The design procedure can be applied in a spreadsheet application on a personal computer.
[1]张国祥.考虑三偏差因素的滴灌系统流量总偏差率[J].农业工程学报,2006,22(11):72-78.Zhang Guoxiang.Calculating the total flow deviation rate of drip-irrigation system based on three deviation rates[J].Transactions of the Chinese Society of Agricultural Engineering,2006,22(11):72-78.(in Chinese)[2]Keller J,Bliesner R D.Sprinkler and Trickle Irrigation[M].New Jersey:The Blackburn,1990:498-508.[3]Zhu Delan,Wu Pute,Merkley G P,et al.Drip irrigation lateral design procedure based on emission uniformity and field micro-topography variation[J].Irrigation and Drainage,2009,59(1):1-12.[4]朱德兰,吴普特,牛文全.用两级优化法进行喷微灌支管设计[J].水利学报,2005,36(5):608-612.Zhu Delan,Wu Pute,Niu Wenquan.Two grades optimal design of submain manifold for sprinkle irrigation[J].Journal of Hydraulic Engineering,2005,36(5):608-612.(in Chinese)[5]Dandy G C,Hassanli A M.Optimum and operation of multiple subunit drip irrigation system[J].Journal of Irrigation and Drainage Engineering,ASCE,1996,122(5):265-275.[6]Kale R V,Singh R P,Mahar P S.Optimal design of pressurized irrigation subunit[J].Journal of Irrigation and Drainage Engineering,ASCE,2008,134(2):137-146.[7]Bhatnagar P R,Srivastava R C.Gravity-fed drip irrigation system for hilly terraces of the northwest himalayas[J].Irrigation Science,2003,21(4):151-157.[8]朱德兰,吴普特,张青峰,等.微地形影响下滴灌均匀度设计指标研究[J].排灌机械,2006,24(1):22-26.Zhu Delan,Wu Pute,Zhang Qingfeng,et al.Study on the emission uniformity for the emitter under the condition of farmland micro-terrain action[J].Drainage and Irrigation Machinery,2006,24(1):22-26.(in Chinese)[9]朱德兰,吴普特,王艳群,等.滴头设计工作压力计算方法研究[J].排灌机械,2005,23(5):31-34.Zhu Delan,Wu Pute,Wang Yanqun,et al.Study on the calculation method of operation pressure of emitters[J].Drainage and Irrigation Machinery,2005,23(5):31-34.(in Chinese)