Abstract：The computer aided design software of hydraulic components of slurry pumps was developed based on Pro/E. Firstly, the theory of solid liquid two phase flows was applied to design hydraulic components of slurry pumps and improve the particle motion inside hydraulic parts, and all the geometric parameters were obtained considering the particle influence on hydraulic parts. Then based on VC++ 6.0 platform and Windows XP operating system, MFC framework was used to develop user interface， and geometric parameters of hydraulic parts were calculated. Finally, based on Pro/TOOLKIT of the Pro/E Wildfire’s version 2.0 which encapsulated a lot of API function interfaces, the computer aided design of slurry pumps was built into Pro/E main menu as slurry pump submenu item. The relevant submenus are developed to automatically model three dimensional hydraulic components, such as impeller, half blades attached to the impeller, casing, front and back shroulds.
唐学林， 边丽媛， 易 成. 基于Pro/E的渣浆泵水力部件开发[J]. 排灌机械工程学报, 2010, 28(2): 112-116.
Tang Xuelin, Bian Liyuan, Yi Cheng. Development of hydraulic components of slurry pump based on Pro/E. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(2): 112-116.
[1]赵青松,李成华,王博,等. 基于Pro／E的离心蜗壳三维模型设计[J]. 沈阳农业大学学报,2005,36(2):241-243.Zhao Qingsong, Li Chenghua, Wang Bo, et al. Three dimensional modeling design for centrifugal spiral casing based on Pro／E[J].Journal of henyang Agricultural University, 2005, 36(2):241-243. (in Chinese)[2]侯祎华,齐学义,常一乐,等. 基于Pro／E的水轮机转轮三维造型[J]. 排灌机械,2006,24(1):14-16,26.Hou Yihua, Qi Xueyi, Chang Yile, et al. 3 D design of hydro turbine′s runner based on Pro／E[J]. Drainage and Irrigation Machinery,2006,24(1):14-16,26. (in Chinese)[3]Lin Y J, Farahati R. CAD based virtual assembly prototyping—a case study[J]. International Journal of Advanced Manufacturing Technology, 2003, 21（4）:263-274.[4]Hardee E, Tu J, Choi K K, et al. A CAD based design parameterization for shape optimization of elastic solids[J]. Advances in Engineering Software, 1999, 30(3):185-199.[5]司辉,丛小青,王 霄. 基于Pro/Engineer二次开发的双流道叶轮流道设计[J]. 排灌机械,2007,25(5):5-8.Si Hui,Cong Xiaoqing,Wang Xiao. Channel design of double channel impeller based on Pro/Engineer second developing technology[J]. Drainage and Irrigation Machinery,2007,25(5):5-8. (in Chinese)[6]Addie G R,Kadambi J R,Visintainer R. Design and application, slurry pump technology[C]／／Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting. 2005:1344-1346.[7]许洪元,罗先武. 磨料固液泵[M]. 北京:清华大学出版社,2000.[8]Khaild Y A,Sapuan S M. Wear analysis of centrifugal slurry pump impellers[J]. Industrial Lubrication and Tribology,2007,59(1):18-28.[9]吴晓蓉,徐金祥. 离心式泥浆泵的水力设计[J]. 排灌机械,2004,22(5):17-19.Wu Xiaorong, Xu Jinxiang. Hydraulic design of centri fugal mud pump[J]. Drainage and Irrigation Machinery,2004,22(5):17-19. (in Chinese)[10]李世国. Pro／TOOLKIT程序设计[M]. 北京: 机械工业出版社,2003.
