Abstract：A new type of multi-nozzle ejecting heater is proposed.The heating device consists of four water nozzles,steam inhalation room,four mixed spouts and diffuse spouts.Ejecting and heating performance of the heater at low steam pressure was studied through the experimental method.The working fluid was 9 ℃ water,and the ejecting fluid was 118～124 ℃steam.The inlet water pressure was changed from 0.1 MPa to 0.45 MPa.The results show that ejecting coefficient and the outlet water temperature decreases while the inlet water pressure rises.Ejecting coefficient decreases while the distance between water nozzle and mixed spout increases.The outlet water temperature increases while steam pressure rises.The temperature can rise by 85 ℃.Heating efficiency of the ejector can reach 99% when the distance between water nozzle and mixed spout is 38 mm.The ejector can operate safely and reliably in low pressure heating system.The risk of high pressure water flowing into low pressure extraction pipe can be eliminated in the confined room by directly mixed heating method.
蔡琴； 童明伟， 沈斌， 白秀娟. 新型喷射式加热器的性能试验[J]. 排灌机械工程学报, 2009, 27(4): 261-264.
Cai Qin,Tong Mingwei,Shen Bin,Bai Xiujuan. Experiment on performance of new type ejecting heater. Journal of Drainage and Irrigation Machinery Engin, 2009, 27(4): 261-264.
[1]Balamurugan S,Gaikar V G,Patwardhan A W.Effect of ejector configuration on hydrodynamics characteristics of gas-liquid ejectors[J].Chemical Engineering Science,2008,63:721-731.[2]Ouzzane M,Aidoun Z.Model development and numerical procedure for detailed ejector analysis and design[J].Applied Thermal Engineering,2003,23:2337-2351.[3]龙新平,关运生,韩宁,等.可调式射流泵性能的数值模拟[J].排灌机械,2008,26(6):1-5.Long Xinping,Guan Yunsheng,Han Ning,et al.Numerical simulation of performance of self-regulating jet pump[J].Drainage and Irrigation Machinery,2008,26(6):1-5.(in Chinese)[4]李刚,袁益超,刘聿拯,等.汽水喷射器升压特性及输出量的调节方法[J].中国电机工程学报,2008,28(17):39-42.Li Gang,Yuan Yichao,Liu Yuzheng,et al.Lifting pressure characteristics and output regulation method of steam-water injector[J].Proceedings of the CSEE,2008,28(17):39-42.(in Chinese)[5]向清江,袁寿其,何培杰,等.液气射流泵内部流场的数值计算[J].江苏大学学报:自然科学版,2008,29(3):231-235.Xiang Qingjiang,Yuan Shouqi,He Peijie,et al.Numerical simulation of liquid jet gas pump[J].Journal of Jiangsu University:Natural Science Edition,2008,29(3):231-235.(in Chinese)[6]Hemidi A,Henry F,Leclaire S,et al.CFD analysis of a supersonic air ejector.Part Ⅰ:Experimental validation of single-phase and two-phase operation[J].Applied Thermal Engineering,2009,29:1523-1531.[7]陆宏圻.喷射技术理论及应用[M].武汉:武汉大学出版社,2004.[8]袁丹青,王冠军,乌骏,等.多喷嘴射流泵数值模拟及试验研究[J].农业工程学报,2008,24(10):95-99.Yuan Danqing,Wang Guanjun,Wu Jun,et al.Numerical simulation and experiment study of multi-nozzle jet pump[J].Transactions of the CSAE,2008,24(10):95-99.(in Chinese)
