Abstract: Based on the analysis of the gear′s force,the finite element method was applied to calculate the tangency intensity of the straight conjugate internal gear pump′s gear,and the result was compared with that calculated from empirical fomulas.The comparison shows that the calculation results of the two methods agree well thus it proves the feasibility and superiority of finite element analysis in the design and material selection of the conjugate internal gear pump.
[1]Tong S H,Yang D C H.On the generation of new lobe pumps for higher pumping flowrate[J].Mechanism and Machine Theory,2000,35:997-1012.[2]崔建昆,秦山,闻斌.直线共轭内啮合齿轮副啮合特性分析[J].机械传动,2004,28(6):12-15.Cui Jiankun,Qin Shan,Wen Bin.Analysis of meshing characteristics for the straight conjugate internal gear pair[J].Journal of Mechanical Tranismission,2004,28(6):12-15.(in Chinese)[3]丛小青,刘梦仙,乌骏.直线-共轭内啮合齿轮泵的设计方法[J].排灌机械,2008,26(1):33-36.Cong Xiaoqing,Liu Mengxian,Wu Jun.Designmethod of straight-conjugate internal gear pump[J].Drainage and Irrigation Machinery,2008,26(1):33-36.(in Chinese)[4]成大先.机械设计手册[M].北京:化学工业出版社,2002:1484-1487.[5]Demenego A,Vecchiato D,Faydor L,et al.Design and simulation of meshing of a cycloidal pump[J].Mechanism and Machine Theory,2002(37):311-332.[6]Litvin F L,Donno M D,Peng A,et al.Integrated computer program for simulation of meshing and contact of gear drives[J].Computer Methods in Applied Mechanics and Engineering,2000,181:71-85.[7]Litvin F L,Seol I H.Computerized determination of gear tooth surface as envelope to two parameter family of surfaces[J].Computer Methods in Applied Mechanics and Engineering,1996,138:213-225.[8]周秦源,孔远翔,米建龙,等.基于Pro/E和ANSYS的齿轮接触应力的有限元分析[J].沈阳航空工业学院学报,2007,24(4):34-37.Zhou Qinyuan,Kong Qiyi,Mi Jianlong,et al.Finite element analysis of gear tangency stress on Pro/E and ANSYS[J].Journal of Shenyang Institute of Aeronau-tical Engineering,2007,24(4):34-37.(in Chinese)