Abstract:The methods to reduce centrifugal pump′s power consumption and to avoid motor overload have been discussed.The method to reduce power by clogging flow passage has been presented.Two attempts on IS 50-32-160 non-overload centrifugal pump have been carried out by using the software FLUENT to forecast the performance.After clogging flow passage for second time,the maximal power was reduced by 10.4% and the non-overload characteristic had been presented.When the flow passage was clogged by 1/4,the proportion between inlet and outlet among two blades was changed to 1.16.The results of forecast are as following: adopting correct method of clogging flow passage,reducing the power of centrifugal pumps,thus their efficiency would be improved.The correct method of clogging flow passage must consider two factors,the ratio of clogging flow passage and an effective area proportion between inlet and outlet among two blades.
王洋, 何文俊. 基于FLUENT的无过载离心泵改型及性能预测[J]. 排灌机械工程学报, 2009, 27(2): 115-118.
Wang Yang,He Wenjun. Improved design and performance forecasting of non-overload centrifugal pumps based on FLUENT. Journal of Drainage and Irrigation Machinery Engin, 2009, 27(2): 115-118.
[1]李昳,袁寿其.低比速离心泵水力设计进展[J].排灌机械,2000,18(1):9-13.Li Yi,Yuan Shouqi.Advances in hydraulic design of low specific speed centrifugal pumps[J].Drainage and Irrigation Machinery,2000,18(1):9-13.(in Chinese)[2]丛小青,袁寿其,袁丹青,等.无过载排污泵水力设计方法[J].排灌机械,2003,21(4):5-7.Cong Xiaoqing,Yuan Shouqi,Yuan Danqing,et al.Design method of the non-overload sewage pumps[J].Drainage and Irrigation Machinery,2003,21(4):5-7.(in Chinese)[3]丛小青,袁寿其,袁丹青.无过载排污泵正交试验研究[J].农业机械学报,2005,36(10):66-69.Cong Xiaoqing,Yuan Shouqi,Yuan Danqing.Research of latin square test on non-overload sewage pumps[J].Transactions of the Chinese Society of Agricultural Machinery,2005,36(10):66-69.(in Chinese)[4]袁寿其,张玉臻.低比速泵水力设计原则及优化思想[J].农业机械学报,1997,28(2):155-159.Yuan Shouqi,Zhang Yuzhen.Principles of hydraulic design and optimization of low specific speed pump[J].Transactions of the Chinese Society of Agricultural Machinery,1997,28(2):155-159.(in Chinese)[5]Choi Y D,Kurokawa J,Matsui J.Performance and internal flow characteristics of a very low specific speed centrifugal pump[J].Journal of Fluids Engineering,Transactions of the ASME,2006,128(2):341-349.[6]袁寿其.低比速离心泵理论与设计[M].北京:机械工业出版社,1997.[7]Gonzalez J,Santolaria C.Unsteady flow structure and global variables in a centrifugal pump[J].Journal of Fluids Engineering,Transactions of the ASME,2006,128(5):937-946.