Experiment on dust suppression performance of selfpriming sprayer
MA Zhong-Fei-1, 2 , ZHANG Yu-Xiang-1, YANG Xiu-Li-1, GE Zhi-Lin-1
(1.School of the Environment, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China)
Abstract:To improve the spray dust suppression,a means,namely selfpriming sprayer dust suppression,was put forward,the working principle of dust suppression was analyzed,and the selfpriming sprayers with different structures were designed.The orthogonal and related comparison experiments were made on those designed selfpriming sprayers.The test results indicated that the distance between the mixing chamber throat and driving nozzle outlet,diffusion angle and driving pressure have different effects on the SMD value,effective range,atomization angle,amount of air entrained.When the distance between the mixing chamber throat and driving nozzle outlet,diffusion angle and driving pressure are 48 mm,30° and 6 MPa,those parameters achieve their optimal values and the best performance presents in dust suppression.The SMD value of conventional single nozzle spray is 124.3 μm,but that of selfpriming sprayer is 108.5 μm,causing a reduction of 12.7% in SMD.As the driving pressure is 6 MPa,the efficiency of all size dust removal is 92.67% and that of breathable dust removal is 87.21% in a conventional single nozzle spray.However,at the same driving pressure,the efficiency of all size dust removal 93.6% and that of breathable dust is 92.69% in the selfpriming sprayer optimized by the orthogonal experiments.Obviously,the dust removal efficiency of breathable dust has been improved greatly in the optimized selfpriming sprayer compared with the efficiency of all size dust removal.
参考文献(References)[1]马中飞.工业通风与除尘[M].北京:中国劳动保障出版社,2009.[2]曹绍龙.高压喷雾除尘技术及其应用[J].陕西煤炭,2008(1): 96-97.Cao Shaolong.Dedusting technics and apply by highpressure fog[J].Shaanxi Coal,2008(1):96-97.(in Chinese)[3]马胜利,刘亚力.掘进工作面高压喷雾降尘的机理分析[J].煤矿机械,2009,30(8):88-90.Ma Shengli,Liu Yali.Mechanism analysis of high pressure spray dustfall in heading face[J].Coal Mine Machinery,2009,30(8):88-90.(in Chinese)[4]Yang S H,Wijeratne A B,Li Li,et al.Manipulation of protein charge states through continuous flowextractive desorption electrospray ionization: A new ambient ionization technique[J].Analytical Chemistry,2011,83(3):643-647.[5]王贞涛,罗惕乾,陈汇龙,等.荷电喷雾改善烟气脱硫效果的机理及试验[J].排灌机械,2009,27(6):403-408.Wang Zhentao,Luo Tiqian,Chen Huilong,et al.Experiment and mechanism analysis on improving flue gas desulfurization efficiency by electrostatic spray[J].Drainage and Irrigation Machinery,2009,27(6):403-408.(in Chinese)[6]赵华玮,代学灵,曾宪桃,等.磁化水降低喷射混凝土粉尘含量的试验研究[J].采矿与安全工程学报,2008,25(3):371-374.Zhao Huawei,Dai Xueling,Zeng Xiantao,et al.Experiment study on using magnetized water for decreasing shotcrete dust density[J].Journal of Mining & Safety Engineering,2008,25(3):371-374.(in Chinese)[7]Bruckard W J,Davey K J,Rodopoulos T,et al.Water leaching and magnetic separation for decreasing the chloride level and upgrading the zinc content of EAF steelmaking baghouse dusts[J].International Journal of Mineral Processing,2005,75(1/2):1-20.[8]Kobayashi Hiroshi,Arao Kimio,Murayama Toshiyuki,et al.Highresolution measurement of size distributions of Asian dust using a coulter multisizer[J].Journal of Atmospheric and Oceanic Technology,2007,24(2):194-205.[9]蔡农.掘进工作面风水喷雾除尘技术的研究与应用[J].能源技术与管理,2008(1):59-61.Cai Nong.Study and application of geomantic omen atomization dedusting echnology on roadway head[J].Energy Technology and Management,2008(1):59-61.(in Chinese)[10]杨秀莉,张化龙.自吸喷雾对采煤机控尘作用的数值模拟[J].煤矿安全,2008(5):20-22.Yang Xiuli,Zhang Hualong.Numerical simulation on selfpriming sprayer to shearerf dust control unction[J].Safety in Coal Mines,2008(5):20-22.(in Chinese)[11]龙新平,鄢恒飞,张松艳,等.喉管长度对环形射流泵性能影响的数值模拟[J].排灌机械工程学报,2010,28(3):198-201.Long Xinping,Yan Hengfei,Zhang Songyan,et al.Numerical simulation for influence of throat length on annular jet pump performance[J].Journal of Drainage and Irrigation Machinery Engineering,2010,28(3):198-201.(in Chinese)[12]Yan Junjie,Chong Daotong,Wu Xinzhuang.Effect of swirling vanes on performance of steamwater jet injector[J].Applied Thermal Engineering,2010,30(6/7):623-630.