Abstract:In order to predict fatigue life of the piezoelectric vibrator used in piezoelectric pump, the finite element model of bimorph piezoelectric vibrator was made and static analysis was carried out by using ANSYS software. The equivalent stress contours were obtained, and the danger points were found out. Then the fatigue analysis was carried out to those danger points by applying ANSYS/Fatigue module and was compared with the other concentrated points. Consequently the fatigue consumption coefficients were obtained. Thus the bimorph piezoelectric vibrator strength and fatigue life could be predicated effectively by the Miner rule. The model was also applied to study the effect of different base materials and structural parameters to the bimorph piezoelectric vibrator fatigue life and was compared with the single-chip piezoelectric vibrator. The results show that the best base material is Cu, radius does not affect the fatigue life, and different thicknesses make larger effect than voltage to the fatigue life. In addition, bimorph piezoelectric vibrator are always longer than the single-chip one, which provides a theoretical basis for selecting and improving the structure of piezoelectric vibrator.
何秀华, 毕雨时, 王 健, 禚洪彩. 基于ANSYS/Fatigue的泵用压电振子疲劳分析[J]. 排灌机械工程学报, 2011, 29(1): 35-38.
He Xiuhua, Bi Yushi, Wang Jian, Zhuo Hongcai. Fatigue analysis of piezoelectric vibrator for pump based on ANSYS/Fatigue. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(1): 35-38.
[1]Peter Woiss.Micropumps-past,progress and future prospects[J].Sensors and Vibrators B,2005(105):28-38.[2]何秀华,张睿,蒋权英.基于MEMS的压电泵及其研究进展[J].排灌机械,2007,25(4):64-68.He Xiuhua,Zhang Rui,Jiang Quanying.Progress on piezoelectric micropump based on MEMS[J].Orainage and Irrigation Machinery,2007,25(4):64-68.(in Chinese)[3]Cicero R de Lima,Sandro L Vatanabe,Andres Choi,et al.A biomimetic piezoelectric pump:computational and experimental characterization[J].Sensors and Vibrators A,2009(152):110-118.[4]Zhu Meiling,Paul Kirby,Martin Wacklerle,et al.Optimization design of multi-material micropump using finite element method[J].Sensors and Vibrators A,2009 (149):130-135.[5]Yihlin Cheng,Lin Jianghong.Manufacture of three-dimensional valveless micropump[J].Journal of Materials Processing Technology,2007(192/193):229-236.[6]Wang D A,Cheng C H,Hsieh Y H,et al.Analysis of an annular PZT vibrator for a droplet ejector[J].Sensors and Vibrators A,2007(137):330-337.[7]施卫东.颜品兰,蒋小平,等.基于ANSYS/ PDS的泵轴可靠性分析[J].排灌机械,2008,26(5):1-4.Shi Weidong,Yan Pinlan,Jiang Xiaoping,et al.Probabilistic analysis of pump shaft based on ANSYS/PDS[J].Drainage and Irrigation Machinery,2008,26 (5):1-4.(in Chinese)[8]Chakarov K,Garbatov Y,Guedes Soares C.Fatigue analysis of ship deck structure accounting for imperfections[J].International Journal of Fatigue,2008 (30):1881-1897.[9]张睿,何秀华,杨篙,等."V"型管无阀压电泵用双压电复合振子的振动性能分析[J].液压与气动,2009 (2):75-77.Zhang Rui,He Xiuhua,Yang Song.Research on vibration characters of the bimorph vibrator for the valve-less piezoelectric pump with "V"-shaped tube[J].Hydraulic and Pneumatic,2009 (2):75-77.(in Chinese)[10]张忠明,服部修次,田川纪英,等.铜合金的疲劳寿命预测[J].材料热处理学报,2005,26(5):76-79.Zhang Zhongming,Shuji Hattori,Hidenori Maekaw,et al.Prediction of fatigue life of copper alloys[J].Transactions of Materials and Heat Treatment,2005,26 (5):76-79.(in Chinese)