Abstract：The frequent faults of surface-driving progressive cavity pump(PCP)wells limit their further development. In order to improve the economic benefits and management level of surface-driving progressive cavity pump wells, a diagnosis method of working conditions of surface-driving PCP well based on support vector machine was proposed. The condition types of PCP wells were subdivided into 10 categories as outputs, and 8 variables were selected as inputs which can represent operation situation of oil wells. Sample sets were established based on the already existing failure oil wells of Jinjia oilfield in Dongsheng group company, and 45 classifiers were built using voting method. Best C and g were determined by three methods including grid optimization, genetic algorithm and particle swarm optimization. The Libsvm toolbox called by Matlab was used to establish and train the SVM model, and 15 PCP wells of Jinjia oilfield in Dongsheng group company were diagnosed to verify the SVM model, and the comparison between support vector machine and artificial neural network was conducted. The results show that the diagnosed working conditions of 14 PCP wells by the SVM method are in accord with their actual working conditions, with an accuracy of 93.33%. Compared to artificial neural network(88.9%), the SVM is more accurate, which is superior for small sample problems, and is a feasible diagnosis method for PCP wells.
刘广东. 基于支持向量机的地面驱动螺杆泵井工况诊断技术[J]. 排灌机械工程学报, 2014, 32(2): 125-129.
Liu Guangdong. Working conditions diagnosis of surface-driving progressive cavity pump wells based on support vector machine. Journal of Drainage and Irrigation Machinery Engin, 2014, 32(2): 125-129.
[1]吴晓东,王世展,王智深.地面驱动螺杆泵采油系统故障诊断方法[J].石油钻采工艺,2003, 25(5):82-84. Wu Xiaodong,Wang Shizhan,Wang Zhishen.Method to diagnose faults for oil extraction system with surface-dri-ving progressive cavity pump used[J].Oil Drilling & Production Technology, 2003,25(5):82-84.(in Chinese)[2]王海文,陈镭,雷健.螺杆泵井光杆受力法工况诊断技术[J].石油钻采工艺,2003,25(5):78-81. Wang Haiwen,Chen Lei,Lei Jian.Diagnosis of the production system from the load borne by the polished rod[J].Oil Drilling & Production Technology,2003,25(5):78-81.(in Chinese)[3]陈实,王海文.螺杆泵井电参数法工况诊断技术[J].石油矿场机械,2007,36(2):53-55. Chen Shi,Wang Haiwen.Diagnosis technology using electricity parameter method for production well adoption progressive cavity pump[J].Oil Field Equipment,2007,36(2):53-55.(in Chinese)[4]祖世强,白建梅,王燕嵩,等.地面驱动螺杆泵井工况分析[J].石油钻采工艺,2006,28(S1):28-31. Zu Shiqiang,Bai Jianmei,Wang Yansong,et al.Operational mode diagnosis of surface driven screw pump well[J].Oil Drilling & Production Technology,2006,28(S1):28-31.(in Chinese)[5]何勇,张涌钢,黄德明.基于神经网络的发动机实时检测与故障诊断系统[J].农业机械学报, 2001,32(4):80-83. He Yong,Zhang Yonggang,Huang Deming.Study on performance measurement and fault diagnosis of engine in real-time based on neural network[J].Transactions of the Chinese Society for Agricultural Machinery,2001,32(4):80-83.(in Chinese)[6]张建华,冀荣华,袁雪,等.基于径向基支持向量机的棉花虫害识别[J].农业机械学报,2011,42(8):178-183. Zhang Jianhua,Ji Ronghua,Yuan Xue,et al.Recognition of pest damage for cotton leaf based on RBF-SVM algorithm[J].Transactions of the Chinese Society for Agricultural Machinery,2011, 42(8):178-183.(in Chinese)[7]刘路,王太勇,蒋永翔,等.基于超球面支持向量机的刀具磨损状态识别[J].农业机械学报,2011,42(1):218-222. Liu Lu,Wang Taiyong,Jiang Yongxiang,et al. Tool wear state recognition based on hyper-sphere support vector machine[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(1):218-222.(in Chinese)[8]Platt J C, Cristianini N, Shawe Taylor J. Large margin DAG′s for multiclass classification[C]// Proceedings of Neural Information Processing Systems. Massachiest: MIT Press,2000:547-553.[9]Chang C C, Lin C J. LIBSVM: A library for support vector machines[J]. ACM Transactions on Intelligent Systems and Technology, 2011, 2(3): 27-36.[10]薛建泉,李敏慧,张国栋,等.基于BP神经网络的螺杆泵井故障诊断技术研究[J].西安石油大学学报:自然科学版,2013,28(3):74-77. Xue Jianquan,Li Minhui,Zhang Guodong,et al.Fault diagnosis technique of screw pump wells based on BP neural network[J].Journal of Xi’an Shiyou University:Natural Science Edition, 2013,28(3):74-77.(in Chinese)
