Orthogonal experiment analysis and optimization design for operation power of ditcher
Yao Keheng1, Liu Shihao2, Xia Yongjun3, Peng Zhuomin1, Zhu Jiping1
(1.Testing Center of Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu 210014, China; 2.College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016, China; 3.College of Engineering of Nanjing Agricultural University, Nanjing, Jiangsu 210031, China)
Abstract:In order to study the influence of factors involved on ditchers operation power consumption and realize the optimization design,the rang analysis and the variance analysis for ditching depth,forward speed and soil hardness were conducted by the design method of orthogonal experiment. It is concluded that the factors sequence is: ditch depth>soil hardness>forward speed,the second order response surface optimization model was established according to the results of orthogonal experiment. Actual measured test data were agree with the model,so the model was validated by the experiment. The experimental results show that the error between calculated and experimental values is within 10%,which indicates that the power consumption optimization model has high engineering practicability. Therefore,the response surface optimization model of ditcher power consumption proposed could provide the theoretical basis for the product designers to select economic power consumption parameters and the suitable power tractor.
[1]罗海峰,官春云,汤楚宙,等.旋耕开沟机横向抛土性能试验[J].湖南农业大学学报:自然科学版,2006,32(4):441-444.Luo Haifeng,Guan Chunyun,Tang Chuzhou,et al.Experimentation on the performance of soil lateral throwing of rotarycultivated ditchers[J].Journal of HunanAgricultural University:Natural Sciences,2006,32(4):441-444.(in Chinese)[2]杨有刚,刘迎春.一种新型链式开沟机设计参数和功率的确定[J].农业机械学报,1998,29(2):21-26.Yang Yougang,Liu Yingchun.The studies on design parameter and power of a new style chain ditcher[J].Transactions of the Chinese Society for Agricultural Machinery,1998,29(2):21-26.(in Chinese)[3]覃国良,廖庆喜,周善鑫,等.基于MATLAB的链式开沟机功耗的优化设计与分析.[J]湖北农业科学,2009,48(1):210-214.Qin Guoliang,Liao Qingxi,Zhou Shanxin,et al.Optimization design and analysis of the power consumption of chaintype ditcher based on MATLAB[J].Hubei Agricultural Sciences,2009,48(1):210-214.(in Chinese)[4]王新坤,李俊红,李亚飞,等.基于正交试验的三角环流流道灌水器数值模拟[J].排灌机械工程学报,2010,28(5):444-448.Wang Xinkun,Li Junhong,Li Yafei,et al.Numerical calculation of triangle circulation drip irrigation emitters based on orthogonal experiment [J].Journal of Drainage and Irrigation Machinery Engineering,2010,28(5):444-448.(in Chinese)[5]貌建华,韩光伟,汤志军,等.玉米秸秆粉碎破茬功耗的田间测试系统与试验[J].拖拉机与农用运输车,2008,35(5),50-52.Mao Jianhua,Han Guangwei,Tang Zhijun,et al.Test system and experiment of power consumption of cutting corn stubble and straw in the field[J].Tractor & Farm Transporter,2008,35(5): 50-52.(in Chinese)[6]Sungill Seo,Naksoo Kim.Optimum design of the cored linear motor using experiment design[J].Journal of Mechanical Science and Technology, 2009,23:2215-2223.[7]袁寿其,张金凤,袁建平,等.用正交试验研究分流叶片主要参数对性能影响[J].排灌机械,2008,26(2):1-4.Yuan Shouqi,Zhang Jinfeng,Yuan Jianping,et al.Orthogonal experimental study effect of main geometry factors of splitter blades on pump performance[J].Drainage and Irrigation Machinery,2008,26(2):1-4.(in Chinese)[8]Li Z Z,Shen Y D,Xu H L,et al.Optimization design of high temperature vacuum furnace using response surface method[J].Journal of Mechanical Science and Technology,2008,22(11):2213-2217.[9]易军鹏,朱文学,马海乐,等.牡丹籽油超声波辅助提取工艺的响应面法优化[J].农业机械学报,2009,40(6): 103-110.Yi Junpeng,Zhu Wenxue,Ma Haile,et al.Optimization on ultrasonicassisted extraction technology of oil from paeonia suffruticosa and seeds with response surface analysis[J].Transactions of the Chinese Society for Agricultural Machinery,2009,40(6):103-110.(in Chinese)[10]Hambli R,Mkaddem A,Potiron A.Application of response surface method for FEM bending analysis [J].International Journal of Vehicle Design,2005,39(1/2):1-13.[11]张维刚,王 祥,刘 晖.基于响应表面法的汽车侧面安全气囊仿真优化[J]江苏大学学报:自然科学版,2009,30(1):19-22.Zhang Weigang,Wang Xiang,Liu Hui.Optimization of side airbag simulation for vehicle side impact by using response surface method[J].Journal of Jiangsu University:Natural Science Edition,2009,30(1):19-22.(in Chinese)[12]Kankar P K,Harsha S P,Kumar P,et al.Fault diagnosis of a rotor bearing system using response surface method[J].European Journal of Mechanics,A/Solids, 2009,28 (4):841-857.[13]Xu Mankun,Li Tianyun,Ping Xijian.Estimation of MB steganography based on least square method[C]∥International Conference on Acoustics,Speech,and Signal Processing(ICASSP).New York: IEEE,2009:1509-1512.[14]van Tung Tran, Yang BoSuk.Datadriven approach to machine condition prognosis using least square regression tree[J].Journal of Mechanical Science and Technology,2009,23(5):1468-1475.[15]Ahn Y K,Kim Y C,Yang B S.Optimum design of engine mount using enhanced genetic algorithm with simplex method[J].Vehicle System Dynamics, 2005,43(1):57-81.[16]Homaifar A,Qi C X,Lai S H.Constrained optimization via genetic algorithm simulation[J].Electronics Letter,1994,62(4):242-254.