|
|
Analysis and comparison of approaches for determining horizontal bearing capacity of rocksocketed pile |
1. Key Laboratory of Concrete and Prestressed Concrete Structure of Ministry of Education, Southeast University, Nanjing, Jiangsu 211189, China; 2. School of Civil Engineering, Southeast University, Nanjing, Jiangsu 211189, China; 3. Guangdong Electric Power Design Institute Co., Ltd., China Energy Engineering Group, Guangzhou, Guangdong 510663, China; 4. Northwest Engineering Corporation Limited, PowerChina, Xi′an, Shaanxi 710065, China
|
|
|
Abstract The existing method and theory for determining the horizontal bearing capacity of rocksocketed pile, including subgrade reaction method and elastic continuum method were summarized and analyzed. The results from different methods were compared based on the insitu test data, and the validity and limitations of the different methods were discussed. The results show that the accuracy of subgrade reaction method depends mainly on experience. The linear elastic subgrade reaction methods of constant method and Matlock method with single parameter are relatively simple, but it is difficult to determine the parameters for rocksocketed pile in the absence of field test data. The py curve method is more suitable for the pile with large deformation because it reflects the nonlinear reaction of foundation. However, the py curve method proposed by Reese overestimates the stiffness of the rock mass, and the validation of the py curves for rocksocketed pile is still inadequate. In the elastic continuum method, the continuity of rock is considered, but it is difficult to include the complex effects in practical engineering.
|
|
|
|
|
[1] |
周峰,朱锐,林树枝,等. 广义桩土共同作用的概念与发展[J]. 南京工业大学学报(自然科学版),2020, 42(6): 683-689.
|
|
ZHOU F, ZHU R, LIN S Z, et al. Concept and development of generalized pilesoil interaction[J]. Journal of Nanjing University of Technology (Natural Science Edition), 2020, 42(6): 683-689.(in Chinese)
|
[2] |
张琦,刘军,戴国亮,等. 大直径嵌岩桩桩端极限承载力计算方法[J]. 东南大学学报(自然科学版),2018,48(1): 118-124.
|
|
ZHANG Q, LIU J, DAI G L, et al. Calculation methods for ultimate end bearing capacity of large diameter rocksocketed piles[J]. Journal of Southeast University(Natural Science Edition), 2018,48(1): 118-124. (in Chinese)
|
[3] |
SINGH A P, BHANDARI T, AYOTHIRAMAN R, et al. Numerical analysis of rocksocketed piles under combined verticallateral loading[J]. Procedia Engineering, 2017, 191:776-784.
|
[4] |
张海洋,刘润,袁宇,等. 海上大直径单桩基础py曲线修正[J]. 水力学报,2020,51(2): 201-211.
|
|
ZHANG H Y, LIU R, YUAN Y, et al. A modified py curve method for offshore largediameter monopile foundations[J]. Journal of Hydraulic Engineering, 2020, 51(2): 201-211. (in Chinese)
|
[5] |
郭骞, 吴宪锴, 杜海鑫. 浑河大桥嵌岩桩水平加载试验研究[J]. 水利与建筑工程学报, 2017, 15(5): 144-148.
|
|
GUO Q, WU X K, DU H X. Horizontal loading test of piles embedded in Hun River Bridge[J]. Journal of Water Resources and Architectural Engineering, 2017, 15(5): 144-148. (in Chinese)
|
[6] |
穆红海. 层状岩体水平受荷桩嵌固深度研究[D].成都:成都理工大学,2017.
|
[7] |
REESE L C. Analysis of laterally loaded piles in weak rock[J]. Journal of Geotechnical and Geoenvironmental Engineering, 1997, 123(11):1010-1017.
|
[8] |
GABR M A, BORDEN R H, CHO K H, et al. py curves for laterally loaded drilled shafts embedded in weathered rock[R].
|
|
North Carolina, USA: North Carolina State University, 2002.
|
[9] |
ZHANG L Y, ERNST H, EINSTEIN H H. Nonlinear analysis of laterally loaded rocksocketed shafts[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2000, 126(11): 955-968.
|
[10] |
HOEK E, BROWN E T. The HoekBrown failure criterion and GSI2018 edition[J]. Journal of Rock Mechanics and Geotechnical Engineering, 2019,11(3): 445-463.
|
[11] |
HOEK E, BROWN E T. Practical estimates of rock mass strength[J]. International Journal of Rock Mechanics and Mining Sciences, 1997, 34(8): 1165-1186.
|
[12] |
YANG K. Analysis of laterally loaded drilled shafts in rock[D]. Ohio, USA: University of Akron, 2006.
|
[13] |
LIANG R, YANG K, NUSAIRAT J. py criterion for rock mass[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(1): 26-36.
|
[14] |
张坤勇, 杜伟, 李广山, 等. 水平受荷嵌岩桩承载性能的修正模型研究[J]. 中国港湾建设, 2017, 37(1): 24-28, 76.
|
|
ZHANG K Y, DU W, LI G S, et al. Model modification on horizontal bearing capacity performance of rocksocketed piles under lateral loads[J]. China Harbour Engineering, 2017, 37(1): 24-28, 76. (in Chinese)
|
[15] |
CHEN J J, ZENG F Y, WANG J H, et al. Analysis of laterally loaded rocksocketed shafts considering the nonlinear behavior of both the soil/rock mass and the shaft[J]. Journal of Geotechnical and Geoenvironmental Engineering, doi: 10.1061/(ASCE)GT.19435606.0001610.
|
[16] |
BIENIAWSKI Z T. Engineering Rock Mass Classifications: A Complete Manual for Engineers and Geologists in Mining, Civil, and Petroleum Engineering[M]. New York, USA: John Wiley & Sons, 1989.
|
[17] |
SHATNAWI E S. Development of py criterion for anisotropic rock and cohesive intermediate geomaterials[D]. Ohio, USA: University of Akron, 2008.
|
|
|
|