|
|
Pore network simulation of two-phase transport characteristics in compressed gas diffusion layer of PEMEC
|
(1. Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan, Hubei 430070, China; 2. Hubei Key Laboratory of Fuel Cell, Wuhan University of Technology, Wuhan, Hubei 430070, China)
|
|
|
Abstract Based on Toray 090 carbon paper, the gas diffusion layers in the proton exchange membrane electrolysis cell under different compression levels were randomly reconstructed,and the breakthrough pressure, capillary pressure curve, relative permeability and relative diffusivity of hydrogen in gas diffusion layer(GDL) were calculated by the three-dimensional pore network model. The mass transfer relationship of hydrogen in the cathode GDL was also investigated. The results show that the hydrogen mass transfer relation reconstructed from the pore network simulation data is more suitable for describing the hydrogen transport in the cathode GDL. The mass transfer performance parameters of relative permeability and relative diffusivity of hydrogen in GDL are almost unchanged under different compression levels. With the increasing of compression level, the resistance of hydrogen transmission in GDL is increased, which leads to the increase of produced hydrogen pressure at the membrane interface,and hydrogen is more likely to leak from the cathode transmembrane to the anode.
|
Received: 19 August 2021
|
|
|
|
[1] |
BAREI K, DE LA RUA C, MCKL M, et al. Life cycle assessment of hydrogen from proton exchange membrane water electrolysis in future energy systems[J]. Applied Energy, 2019, 237: 862-872.
|
[2] |
TOGHYANI S, FAKHRADINI S, AFSHARI E, et al. Optimization of operating parameters of a polymer exchange membrane electrolyzer[J]. International Journal of Hydrogen Energy, 2019,44(13): 6403-6414.
|
[3] |
AL SHAKHSHIR S, FRENSCH S, KAER S K. On the experimental investigation of the clamping pressure effects on the proton exchange membrane water electrolyser cell performance[J]. ECS Transactions, 2017, 77(11):1409-1421.
|
[4] |
KISHOR K, PARASHTEKAR A, SAHA S, et al. Rational design strategy for optimization of clamping pressure to minimize contact resistance between electrode and current collector while preserving porosity of electrodes in water electrolyzers[J]. The Canadian Journal of Chemical Engineering, 2018,96(4): 881-885.
|
[5] |
OMRANI R, SHABANI B. Hydrogen crossover in proton exchange membrane electrolysers: the effect of current density, pressure, temperature, and compression[J]. Electrochimica Acta,DOI:10.1016/j.electacta.2021.138085.
|
[6] |
黎方菊, 吴伟, 汪双凤. PEMFC带沟槽气体扩散层内传输特性孔隙网络模拟[J]. 化工学报, 2020,71(5): 1976-1985.
|
|
LI F J, WU W, WANG S F. Pore network simulation of transport properties in grooved gas diffusion layer of PEMFC[J]. CIESC Journal, 2020, 71(5): 1976-1985.(in Chinese)
|
[7] |
TRANTER T G, GOSTICK J T, BURNS A D, et al. Pore network modeling of compressed fuel cell components with OpenPNM[J]. Fuel Cells, 2016, 16(4): 504-515.
|
[8] |
GOSTICK J T, FOWLER M W, PRITZKER M D,et al. In-plane and through-plane gas permeability of carbon fiber electrode backing layers[J]. Journal of Power Sources, 2006, 162(1):228-238.
|
[9] |
GOSTICK J T, IOANNIDIS M A, FOWLER M W, et al. Wettability and capillary behavior of fibrous gas diffusion media for polymer electrolyte membrane fuel cells[J]. Journal of Power Sources, 2009, 194(1): 433-444.
|
|
|
|