|
|
Simulation analysis of picking head height adjustment device of cotton picker based on AMESim |
1. College of Mechanical Electrical Engineering, Shihezi University, Shihezi, Xinjiang 832000, China; 2.The First Affiliated Hospital of Medical College, Shihezi University, Shihezi, Xinjiang 832000, China; 3. Alar Wanda Agricultural Machinery Co., Ltd., Alar, Xinjiang 843300, China; 4. College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing 400044, China
|
|
|
Abstract To solve the problem that the picking head of cotton picker could not adjust automatically according to the fluctuation of the ground height in time, a ground height adjusting device for the picking head of cotton picker was designed. The key components of the device was composed of copying mechanism, lifting mechanism and hydraulic control system. Through theoretical analysis, the maximum thrust of the hydraulic cylinder in the whole process of motion was 62 28856 N, and the parameters of the hydraulic system were obtained according to the motion conditions of the lifting mechanism. The model of the lifting mechanism and the hydraulic system of the height adjustment device was established based on the AMESim simulation software. After the simulation, the flow, displacement, speed, the force of piston rod and the motion characteristics of the lifting mechanism of hydraulic system of the height adjustment device of picking head were analyzed. The results show that the simulation results are consistent with the theoretical analysis to meet the requirements of the height adjustment of the picking head, and the accuracy of the theoretical calculation is verified.
|
|
|
|
|
[1] |
彭强吉,荐世春,宋和平,等.3MDZJ1型棉花智能精准打顶机的试验研究[J].干旱地区农业研究,2017,35(3):292-296.
|
|
PENG Q J, JIAN S C, SONG H P, et al.Experimental research of 3MDZJ1 type intelligent precise cutting cotton top machine[J].Agricultural Research in the Arid Areas,2017,35(3):292-296. (in Chinese)
|
[2] |
邓美云.木薯收获机茎秆切割铺放装置的研究[D].海口:海南大学,2016.
|
[3] |
伟利国,车宇,汪凤珠,等.联合收割机割台地面仿形控制系统设计及试验[J].农机化研究,2017,39(5):150-154.
|
|
WEI L G, CHE Y, WANG F Z, et al. Design and experiment of the ground profiling control system of combine header[J].Journal of Agricultural Mechanization Research,2017,39(5):150-154. (in Chinese)
|
[4] |
古乐乐.红花采收机升降装置与液压传动系统的设计与研究[D].石河子:石河子大学,2018.
|
[5] |
孙艳,龚丽农,赵艳华,等.智能花生收获机地面仿形及试验平台机构研究[J].农机化研究,2015,37(12):152-155.
|
|
SUN Y, GONG L N, ZHAO Y H, et al.Research on synthetical and quantitative evaluation about tobacco transplanting machine[J]. Journal of Agricultural Mechanization Research, 2015,37(12): 152-155. (in Chinese)
|
[6] |
李腾.无土切断粉碎还田机的设计和研究[D].淄博:山东理工大学,2016.
|
[7] |
马喆,高自成,李立君,等.基于AMESim和Simcenter 3D的齿梳式油茶果采摘机联合仿真[J].西北林学院学报,2021,36(2):289-296.
|
|
MA Z, GAO Z C, LI L J, et al. Cosimulation of toothed comb oil tea fruit picking machine based on AMESim and simcenter 3D[J].Journal of Northwest Forestry University, 2021,36(2):289-296. (in Chinese)
|
[8] |
穆天驰,张东民,周伟民.基于AMESim的同步柔性冲压装置控制系统仿真分析[J].液压与气动,2021(2):134-138.
|
|
MU T C, ZHANG D M, ZHOU W M. Simulation analysis of control system of synchronous flexible stamping device based on AMESim[J]. Chinese Hydraulics & Pneumatics,2021(2):134-138. (in Chinese)
|
[9] |
王连志,赵北,刘龙,等.基于AMESim和MATLAB/Simulink联合的举升系统仿真分析[J].工程机械,2021,52(3):73-77,10.
|
|
WANG L Z, ZHAO B, LIU L,et al. Simulation analysis of lifting system based on AMESim and MATLAB/Simulink[J]. Construction Machinery and Equipment, 2021,52(3): 73-77,10. (in Chinese)
|
[10] |
刘延旭,路玉峰,姚念猛.基于AMESimSimulink的半挂汽车列车辅助驱动方法[J].江苏大学学报(自然科学版),2019,40(4):380-385.
|
|
LIU Y X, LU Y F, YAO N M.Auxiliary driving method of tractorsemitrailer based on AMESimSimulink[J]. Journal of Jiangsu University (Natural Science Edition),2019,40(4):380-385. (in Chinese)
|
|
|
|