|
|
Stability analysis of quadruped robot based on compound cycloid trajectory |
1. School of Mechanical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China; 2. College of Engineering, Shantou University, Shantou, Guangdong 515063, China |
|
|
Abstract To shorten the development cycle of quadruped robot and further improve its motion stability, the stability of quadruped robot under different gait periods was investigated based on compound cycloid trajectory. The structure design of quadruped robot was completed, and the kinematics model was established for kinematic analysis. The trajectory planning was carried out by the compound cycloid method, and the driving function of each joint was obtained by combining the kinematics model. The driving function was imported into the ADAMS model to set relevant constraints for dynamic simulation. The body turn angle was taken as the main performance evaluation index, and the stability of quadruped robot under different gait cycles was tested and analyzed by adjusting gait cycles appropriately. The proposed method was verified by physical prototype. The results show that when the gait period is 1.3 s, the maximum rotation angle of the body is decreased by 1.014°, and the fluctuation range of mass center is also decreased, which verifies that the stability of quadruped robot based on target trajectory can be further improved by adjusting the gait period appropriately.
|
Received: 13 August 2020
|
|
|
|
[1] |
CHAN C Y, LIU Y C. Towards a walking, turning, and jumping quadruped robot with compliant mechanisms[C]∥Proceedings of the 2016 IEEE International Conference on Advanced Intelligent Mechatronics. New York: IEEE, 2016: 614-620.
|
[2] |
WANG L W, WANG C D, DU W L, et al. Parameter optimization of a four-legged robot to improve motion trajectory accuracy using signal-to-noise ratio theory[J]. Robotics and Computer-Integrated Manufacturing, 2018, 51: 85-96.
|
[3] |
GONZALEZ-LUCHENA I, CONZALEZ-RODRIGUEZ A G, GONZALEZ-RODRIGUEZ A, et al. A new algorithm to maintain lateral stabilization during the running gait of a quadruped robot[J]. Robotics and Autonomous Systems, 2016, 83: 57-72.
|
[4] |
AZIMI M, YAZDI M R H. Energy dissipation rate control and parallel equations solving method for planar spined quadruped bouncing robot[J]. Journal of Mechanical Science and Technology, 2017, 31(2): 875-884.
|
[5] |
韩晓建,商李隐,杨涌. 四足机器人启动步态设计及稳定性分析[J]. 机械科学与技术,2016,35(8):1169-1175.
|
|
HAN X J, SHANG L Y, YANG Y. Start gait design and stability analysis of a quadruped robot[J]. Mecha-nical Science and Technology for Aerospace Engineering, 2016, 35(8): 1169-1175. (in Chinese)
|
[6] |
韩宝玲,汪清强,贾燕,等. 提升四足机器人行走稳定性的对角步态规划方法[J]. 北京理工大学学报, 2018, 38(9): 917-920,926.
|
|
HAN B L, WANG Q Q, JIA Y, et al. Trot gait planning method for improving the stability of quadruped robot[J]. Transactions of Beijing Institute of Technology, 2018, 38(9): 917-920,926. (in Chinese)
|
[7] |
雷静桃,俞煌颖,王峰. 四足机器人对角小跑步态动态稳定步行足端非连续约束及动力学建模[J]. 中国机械工程,2015,26(5): 592-597.
|
|
LEI J T, YU H Y, WANG F. Analysis on non-conti-nuous and dynamics modeling of quadruped robot dynamically stable walking with trot gait[J]. China Mechanical Engineering, 2015,26(5): 592-597. (in Chinese)
|
[8] |
谢惠祥,尚建忠,罗自荣,等. 四足机器人对角小跑中机体翻转分析与姿态控制[J]. 机器人,2014,36(6):676-682.
|
|
XIE H X, SHANG J Z, LUO Z R, et al. Body rolling analysis and attitude control of a quadruped robot during trotting[J]. Robot, 2014,36(6):676-682. (in Chinese)
|
[9] |
KIM J, KANG T, SONG D, et al. Design and control of a open-source, low cost, 3D printed dynamic quadruped robot[J]. Applied Sciences, 2021, doi: 10.3390/app11093762.
|
[10] |
RODINÒS, CURCIO E M, DI BELLA A, et al. Design, simulation, and preliminary validation of a four-legged robot[J]. Machines, 2020,doi:10.3390/machines8040082.
|
|
|
|