Abstract:A new conditioning mechanism of mower conditioner was developed to solve the operation unhandiness of flattening roller. Operational requirements, working principle and mechanical properties of the conditioning mechanism were analyzed. Operational effectiveness and reliability were set as primary design goals with agronomic requirements as constraint conditions. Based on the theoretical analysis, the motion mechanism and the geometry parameters of flattening roll were calculated and developed to conduct the operating performance test. According to the evaluation criteria of flattening ratio, the levels of experimental factors were determined to obtain high operating efficiency.The results show that high flattening rate of 53.71% can be obtained under the conditions of small gap flattening roller and large compression ratio with staggered feeding.
高东明, 王德成, 郝丽颖, 孙婕, 付作立. 割草调制机的调制机构设计与试验[J]. 江苏大学学报(自然科学版), 2013, 34(3): 287-292.
GAO Dong-Ming, WANG De-Cheng, HAO Li-Ying, SUN Jie, FU Zuo-Li. Design and experiment of new conditioning mechanism for mower conditioner[J]. Journal of Jiangsu University(Natural Science Eidtion)
, 2013, 34(3): 287-292.